Date: Fri, 14 Jun 1996 12:01:47 -0700 (PDT) From: hawky/Hawksmom <hawk2@netcom.com> To: Frank Seltzer <frankd@yoda.fdt.net> Cc: questions@freebsd.org Subject: Re: I am still having modem problems Message-ID: <Pine.3.89.9606141100.A29722-0100000@netcom5.netcom.com> In-Reply-To: <Pine.BSF.3.91.960614141623.178F-100000@Kryten.nina.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 14 Jun 1996, Frank Seltzer wrote: > > > type anything to it. I have tried everything I can possibly think of. > > did you try ppp's term mode? First type 'set modem /dev/cuaa1', then type > 'term' at the ppp > prompt(no quotes). This will let you use the Hayes AT > command set to talk to your modem. yes, when the modem is set to /dev/cuaa1 and I try term it open but I can't type to it. > > /etc/sysconfig: > > # ifconfig_cuaa0="inet 192.215.166.87 netmask 255.255.255.0" > > Change this from ifconfig_cuaa0 to ifconfig_tun0 and uncomment it. should it still be tun0 tun1 or do these numbers not mean the same as the si0* and cuaaa*? > > sio0 not found at 0x3f8 > > sio1 at 0x2f8-0x2ff irq 3 on isa > > sio1: type 16550A > > You have a modem on com2 and no com1 at all? > have one modem and it has always been on com1 in dos /dev/cua0 in linux and it was /dev/cuaa0 when I was first able to use the 'term' commmand in ppp a few weeks ago. I never payed attention to what sio* it was on when it was working, but now I see it on sio1, though I can't figureout how it got changed. Now it doesn't work and said 'failed to open modem' I made the changes you suggested and now when I run term, it goes into term mode, but I can't type anything into it, and I can't close or kill the ppp process. I have even (as root) tried kill -9 and that didn't work I end up suspending out so I can have the xterm back. Thanx, Geoff
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.3.89.9606141100.A29722-0100000>