Date: Mon, 21 Nov 2011 09:48:16 -0700 (MST) From: Dennis Glatting <freebsd@penx.com> To: Jeremy Chadwick <freebsd@jdc.parodius.com> Cc: freebsd-fs@freebsd.org Subject: Re: Errors (ZFS) with Supmermicro AOC-USAS2-L8e Message-ID: <alpine.BSF.2.00.1111210945550.63907@Elmer.dco.penx.com> In-Reply-To: <20111121161503.GA53628@icarus.home.lan> References: <alpine.BSF.2.00.1111210910090.58359@Elmer.dco.penx.com> <20111121161503.GA53628@icarus.home.lan>
next in thread | previous in thread | raw e-mail | index | archive | help
Below
On Mon, 21 Nov 2011, Jeremy Chadwick wrote:
> On Mon, Nov 21, 2011 at 09:10:54AM -0700, Dennis Glatting wrote:
>> I have two of those boards flashed with IT and on both I see reset
>> notices. I also have an LSI 9211-8i in both systems flashed to IT and do
>> not see resets. Both handle ZFS volumes.
>>
>> Clearly I've missed something. Any idea what to look at?
>>
>>
>> mps1: <LSI SAS2008> port 0xee00-0xeeff mem
>> 0xfbefc000-0xfbefffff,0xfbe80000-0xfbebffff irq 16 at device 0.0 on pci6
>> mps1: Firmware: 11.00.00.00
>> mps1: IOCCapabilities:
>> 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
>> mps1: [ITHREAD]
>> da5 at mps1 bus 0 scbus10 target 0 lun 0
>> da6 at mps1 bus 0 scbus10 target 1 lun 0
>> da7 at mps1 bus 0 scbus10 target 2 lun 0
>> da8 at mps1 bus 0 scbus10 target 3 lun 0
>> da9 at mps1 bus 0 scbus10 target 6 lun 0
>> da10 at mps1 bus 0 scbus10 target 7 lun 0
>> (da7:mps1:0:2:0): READ(10). CDB: 28 0 3 33 c6 f5 0 0 1 0
>> (da7:mps1:0:2:0): CAM status: SCSI Status Error
>> (da7:mps1:0:2:0): SCSI status: Check Condition
>> (da7:mps1:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset,
>> or bus device reset occurred)
>> (da5:mps1:0:0:0): READ(10). CDB: 28 0 3 33 c6 f5 0 0 1 0
>> (da5:mps1:0:0:0): CAM status: SCSI Status Error
>> (da5:mps1:0:0:0): SCSI status: Check Condition
>> (da5:mps1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset,
>> or bus device reset occurred)
>> (da9:mps1:0:6:0): READ(10). CDB: 28 0 3 33 c6 f5 0 0 1 0
>> (da9:mps1:0:6:0): CAM status: SCSI Status Error
>> (da9:mps1:0:6:0): SCSI status: Check Condition
>> (da9:mps1:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset,
>> or bus device reset occurred)
>> (da8:mps1:0:3:0): READ(10). CDB: 28 0 4 97 a a3 0 0 1 0
>> (da8:mps1:0:3:0): CAM status: SCSI Status Error
>> (da8:mps1:0:3:0): SCSI status: Check Condition
>> (da8:mps1:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset,
>> or bus device reset occurred)
>
> uname -a please, as we need to know what kernel version and build date
> of the system you're using. Thanks.
>
iirc> uname -a
FreeBSD iirc 8.2-STABLE FreeBSD 8.2-STABLE #36: Fri Nov 18 04:26:35 PST
2011 root@iirc:/disk-1/src/sys/amd64/compile/IIRC amd64
iirc> zpool status
pool: disk-1
state: ONLINE
scan: scrub repaired 0 in 0h41m with 0 errors on Thu Nov 17 23:37:20 2011
config:
NAME STATE READ WRITE CKSUM
disk-1 ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
da1 ONLINE 0 0 0
da6 ONLINE 0 0 0
da2 ONLINE 0 0 0
da4 ONLINE 0 0 0
da9 ONLINE 0 0 0
da7 ONLINE 0 0 0
da10 ONLINE 0 0 0
da5 ONLINE 0 0 0
da8 ONLINE 0 0 0
da3 ONLINE 0 0 0
cache
ada0 ONLINE 0 0 0
errors: No known data errors
pool: disk-2
state: ONLINE
scan: scrub repaired 0 in 0h3m with 0 errors on Thu Oct 27 23:41:37 2011
config:
NAME STATE READ WRITE CKSUM
disk-2 ONLINE 0 0 0
ada3 ONLINE 0 0 0
ada2 ONLINE 0 0 0
cache
ada1 ONLINE 0 0 0
errors: No known data errors
iirc> dmesg
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-STABLE #36: Fri Nov 18 04:26:35 PST 2011
root@iirc:/disk-1/src/sys/amd64/compile/IIRC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) i7 CPU 940 @ 2.93GHz (2981.09-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x106a4 Family = 6 Model = 1a Stepping
= 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 25769803776 (24576 MB)
avail memory = 24825692160 (23675 MB)
ACPI APIC Table: <GBT GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dfdd0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
ahci0: <Marvell 88SE9128 AHCI SATA controller> port
0xdf00-0xdf07,0xde00-0xde03,0xdd00-0xdd07,0xdc00-0xdc03,0xdb00-0xdb0f mem
0xfbdff000-0xfbdff7ff irq 16 at device 0.0 on pci1
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [ITHREAD]
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich6: [ITHREAD]
ahcich7: <AHCI channel> at channel 7 on ahci0
ahcich7: [ITHREAD]
pcib2: <PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci2: <PCI bus> on pcib2
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfbcfe000-0xfbcfffff irq
16 at device 0.0 on pci2
xhci0: [ITHREAD]
xhci0: 32 byte context size.
usbus0 on xhci0
pcib3: <PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci3: <PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xce00-0xceff mem
0xe0000000-0xefffffff,0xfb8c0000-0xfb8dffff irq 16 at device 0.0 on pci3
pci3: <multimedia, HDA> at device 0.1 (no driver attached)
pcib4: <PCI-PCI bridge> irq 16 at device 5.0 on pci0
pci4: <PCI bus> on pcib4
arcmsr0: <Areca SAS 6G Host Adapter RAID Controller (RAID6 capable)
> port 0xbe00-0xbeff mem 0xfb7f0000-0xfb7fffff,0xfb780000-0xfb7bffff irq
16 at device 0.0 on pci4
ARECA RAID ADAPTER0: Driver Version 1.20.00.22 2011-07-04
ARECA RAID ADAPTER0: FIRMWARE VERSION V1.49 2011-08-02
arcmsr0: [ITHREAD]
pcib5: <PCI-PCI bridge> irq 16 at device 7.0 on pci0
pci5: <PCI bus> on pcib5
mps0: <LSI SAS2008> port 0x7e00-0x7eff mem
0xfb6fc000-0xfb6fffff,0xfb680000-0xfb6bffff irq 16 at device 0.0 on pci5
mps0: Firmware: 07.00.00.00
mps0: IOCCapabilities:
185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR>
mps0: [ITHREAD]
pcib6: <PCI-PCI bridge> irq 16 at device 9.0 on pci0
pci6: <PCI bus> on pcib6
mps1: <LSI SAS2008> port 0xee00-0xeeff mem
0xfbefc000-0xfbefffff,0xfbe80000-0xfbebffff irq 16 at device 0.0 on pci6
mps1: Firmware: 11.00.00.00
mps1: IOCCapabilities:
1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
mps1: [ITHREAD]
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver
attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xff00-0xff1f irq
16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus1: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xfe00-0xfe1f irq
21 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus2: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xfd00-0xfd1f irq
18 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus3: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem
0xfbffe000-0xfbffe3ff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci7: <ACPI PCI bus> on pcib7
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xaf00-0xaf1f mem
0xfbbc0000-0xfbbdffff,0xfbb00000-0xfbb7ffff,0xfbbfc000-0xfbbfffff irq 16
at device 0.0 on pci7
em0: Using MSIX interrupts with 3 vectors
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
em0: Ethernet address: 00:1b:21:c1:aa:97
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci8: <ACPI PCI bus> on pcib8
re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port
0x9e00-0x9eff mem 0xfbaff000-0xfbafffff,0xfbaf8000-0xfbafbfff irq 16 at
device 0.0 on pci8
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 1c:6f:65:3e:ee:50
re0: [ITHREAD]
pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci9: <ACPI PCI bus> on pcib9
re1: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port
0x8e00-0x8eff mem 0xfb9ff000-0xfb9fffff,0xfb9f8000-0xfb9fbfff irq 17 at
device 0.0 on pci9
re1: Using 1 MSI-X message
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re1: Ethernet address: 1c:6f:65:3e:ee:60
re1: [ITHREAD]
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xfc00-0xfc1f irq
23 at device 29.0 on pci0
uhci3: [ITHREAD]
usbus5: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xfb00-0xfb1f irq
19 at device 29.1 on pci0
uhci4: [ITHREAD]
usbus6: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xfa00-0xfa1f irq
18 at device 29.2 on pci0
uhci5: [ITHREAD]
usbus7: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem
0xfbffd000-0xfbffd3ff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus8: EHCI version 1.0
usbus8: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib10
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci1: <Intel ICH10 AHCI SATA controller> port
0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf51f mem
0xfbffc000-0xfbffc7ff irq 19 at device 31.2 on pci0
ahci1: [ITHREAD]
ahci1: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich8: <AHCI channel> at channel 0 on ahci1
ahcich8: [ITHREAD]
ahcich9: <AHCI channel> at channel 1 on ahci1
ahcich9: [ITHREAD]
ahcich10: <AHCI channel> at channel 2 on ahci1
ahcich10: [ITHREAD]
ahcich11: <AHCI channel> at channel 3 on ahci1
ahcich11: [ITHREAD]
ahcich12: <AHCI channel> at channel 4 on ahci1
ahcich12: [ITHREAD]
ahcich13: <AHCI channel> at channel 5 on ahci1
ahcich13: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq
0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
qpi0: <QPI system bus> on motherboard
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xdb000-0xdbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Timecounters tick every 1.000 msec
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 12Mbps Full Speed USB v1.0
usbus8: 480Mbps High Speed USB v2.0
ugen0.1: <0x1033> at usbus0
uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
ugen8.1: <Intel> at usbus8
uhub8: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
uhub0: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
uhub4: 6 ports with 6 removable, self powered
uhub8: 6 ports with 6 removable, self powered
ugen1.2: <Microsoft> at usbus1
ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEyeTM, class 0/0,
rev 1.10/3.00, addr 2> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen2.2: <USB> at usbus2
ukbd0: <USB USB Keykoard, class 0/0, rev 1.10/1.10, addr 2> on usbus2
ugen3.2: <CPS> at usbus3
kbd2 at ukbd0
uhid0: <USB USB Keykoard, class 0/0, rev 1.10/1.10, addr 2> on usbus2
ahcich7: Poll timeout on slot 0 port 0
ahcich7: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 50 serr
00000000 cmd 10004016
ada0 at ahcich8 bus 0 scbus11 target 0 lun 0
ada0: <OCZ-AGILITY2 1.33> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 57241MB (117231408 512 byte sectors: 16H 63S/T 16383C)
ada1 at ahcich9 bus 0 scbus12 target 0 lun 0
ada1: <OCZ-AGILITY2 1.33> ATA-8 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 57241MB (117231408 512 byte sectors: 16H 63S/T 16383C)
ada2 at ahcich10 bus 0 scbus13 target 0 lun 0
ada2: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3 at ahcich11 bus 0 scbus14 target 0 lun 0
ada3: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
da0 at arcmsr0 bus 0 scbus8 target 0 lun 0
da0: <Areca OS R001> Fixed Direct Access SCSI-5 device
da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit)
da0: Command Queueing enabled
da0: 953869MB (1953523712 512 byte sectors: 255H 63S/T 121601C)
da1 at mps0 bus 0 scbus9 target 0 lun 0
da1: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-5 device
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da2 at mps0 bus 0 scbus9 target 1 lun 0
da2: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-5 device
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da3 at mps0 bus 0 scbus9 target 2 lun 0
da3: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-5 device
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da4 at mps0 bus 0 scbus9 target 3 lun 0
da4: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-5 device
da4: 300.000MB/s transfers
da4: Command Queueing enabled
da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da5 at mps1 bus 0 scbus10 target 0 lun 0
da5: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
da5: 300.000MB/s transfers
da5: Command Queueing enabled
da5: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da6 at mps1 bus 0 scbus10 target 1 lun 0
da6: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
da6: 300.000MB/s transfers
da6: Command Queueing enabled
da6: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da7 at mps1 bus 0 scbus10 target 2 lun 0
da7: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
da7: 300.000MB/s transfers
da7: Command Queueing enabled
da7: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da8 at mps1 bus 0 scbus10 target 3 lun 0
da8: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
da8: 300.000MB/s transfers
da8: Command Queueing enabled
da8: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da9 at mps1 bus 0 scbus10 target 6 lun 0
da9: <ATA ST2000DL003-9VT1 CC32> Fixed Direct Access SCSI-6 device
da9: 600.000MB/s transfers
da9: Command Queueing enabled
da9: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da10 at mps1 bus 0 scbus10 target 7 lun 0
da10: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
da10: 300.000MB/s transfers
da10: Command Queueing enabled
da10: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
pass1 at arcmsr0 bus 0 scbus8 target 16 lun 0
pass1: <Areca RAID controller R001> Fixed Processor SCSI-0 device
SMP: AP CPU #1 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
Trying to mount root from ufs:/dev/da0p3
ZFS filesystem version 5
ZFS storage pool version 28
ugen2.2: <USB> at usbus2 (disconnected)
ukbd0: at uhub2, port 1, addr 2 (disconnected)
uhid0: at uhub2, port 1, addr 2 (disconnected)
ugen2.2: <USB> at usbus2
ukbd0: <USB USB Keykoard, class 0/0, rev 1.10/1.10, addr 2> on usbus2
kbd2 at ukbd0
uhid0: <USB USB Keykoard, class 0/0, rev 1.10/1.10, addr 2> on usbus2
(da7:mps1:0:2:0): READ(10). CDB: 28 0 3 33 c6 f5 0 0 1 0
(da7:mps1:0:2:0): CAM status: SCSI Status Error
(da7:mps1:0:2:0): SCSI status: Check Condition
(da7:mps1:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
(da5:mps1:0:0:0): READ(10). CDB: 28 0 3 33 c6 f5 0 0 1 0
(da5:mps1:0:0:0): CAM status: SCSI Status Error
(da5:mps1:0:0:0): SCSI status: Check Condition
(da5:mps1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
(da9:mps1:0:6:0): READ(10). CDB: 28 0 3 33 c6 f5 0 0 1 0
(da9:mps1:0:6:0): CAM status: SCSI Status Error
(da9:mps1:0:6:0): SCSI status: Check Condition
(da9:mps1:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
(da8:mps1:0:3:0): READ(10). CDB: 28 0 4 97 a a3 0 0 1 0
(da8:mps1:0:3:0): CAM status: SCSI Status Error
(da8:mps1:0:3:0): SCSI status: Check Condition
(da8:mps1:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
pid 2395 (akonadiserver), uid 128: exited on signal 11 (core dumped)
pid 2492 (akonadiserver), uid 128: exited on signal 11 (core dumped)
pid 2494 (akonadiserver), uid 128: exited on signal 11 (core dumped)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1111210945550.63907>