Date: Thu, 28 May 2015 18:13:47 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-ports-bugs@FreeBSD.org Subject: [Bug 200497] math/scilab does not build on 10.1 Message-ID: <bug-200497-13@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=200497 Bug ID: 200497 Summary: math/scilab does not build on 10.1 Product: Ports & Packages Version: Latest Hardware: amd64 OS: Any Status: New Severity: Affects Only Me Priority: --- Component: Individual Port(s) Assignee: makc@FreeBSD.org Reporter: trust_no_1@libero.it Assignee: makc@FreeBSD.org Flags: maintainer-feedback?(makc@FreeBSD.org) Created attachment 157229 --> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=157229&action=edit output of 'make install clean' On my system (FreeBSD 10.1) math/scilab does not build. What I have done is: 1) portsnap fetch update 2) portmaster -a 3) cd /usr/ports/math/scilab 4) make fetch-recursive 5) make install clean The build starts and all seems to go well, until it stops as reported later. P.S. I tried to also run 'make MAKE_JOBS_UNSAFE=yes' but the error still persist. Thank you. ===> Compilation failed unexpectedly. Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to the maintainer. *** Error code 1 Stop. make[1]: stopped in /usr/ports/math/scilab *** Error code 1 Stop. make: stopped in /usr/ports/math/scilab ========================= DMESG ====================================== Copyright (c) 1992-2015 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.1-STABLE #20 r283293: Sat May 23 00:50:06 CEST 2015 root@dukefleed.2mh.it:/usr/obj/usr/src/sys/DUKEFLEED amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3591.31-MHz K8-class CPU) Origin="GenuineIntel" Id=0xf41 Family=0xf Model=0x4 Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x659d<SSE3,DTES64,MON,DS_CPL,EST,TM2,CNXT-ID,CX16,xTPR> AMD Features=0x20100800<SYSCALL,NX,LM> TSC: P-state invariant real memory = 8589934592 (8192 MB) avail memory = 8184320000 (7805 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <DELL WS 670 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP/HT): APIC ID: 7 ioapic0: Changing APIC ID to 8 ioapic1: Changing APIC ID to 9 ioapic2: Changing APIC ID to 10 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard lapic0: Forcing LINT1 to edge trigger random: <Software, Yarrow> initialized kbd1 at kbdmux0 splash_bmp: unsupported BMP format (size=124) splash_bmp: unsupported BMP format (size=124) splash_bmp: unsupported BMP format (size=124) splash_bmp: unsupported BMP format (size=124) splash_bmp: unsupported BMP format (size=124) splash_bmp: No appropriate video mode found module_register_init: MOD_LOAD (splash_bmp, 0xffffffff810ef000, 0) error 19 cryptosoft0: <software crypto> on motherboard acpi0: <DELL WS 670 > on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <unknown> at device 0.1 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 bge0: <Broadcom Gigabit Ethernet Controller, ASIC rev. 0x007102> mem 0xdfdf0000-0xdfdfffff irq 26 at device 12.0 on pci2 bge0: CHIP ID 0x00007102; ASIC REV 0x07; CHIP REV 0x71; PCI-X 66 MHz miibus0: <MII bus> on bge0 brgphy0: <BCM5401 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:04:76:aa:a6:05 ahd0: <Adaptec AIC7901 Ultra320 SCSI adapter> port 0xd800-0xd8ff,0xdc00-0xdcff mem 0xdfdee000-0xdfdeffff irq 24 at device 14.0 on pci2 aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 50-66MHz, 512 SCBs pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 pci3: <ACPI PCI bus> on pcib3 ubsec0 mem 0xdfbd0000-0xdfbdffff irq 53 at device 12.0 on pci3 ubsec0: Broadcom 5823 aac0: <Dell CERC SATA RAID 2> mem 0xb0000000-0xb3ffffff irq 49 at device 13.0 on pci3 aac0: CERC SATA1.5/6ch, aac driver 2.1.9-1 em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0xccc0-0xccff mem 0xdfbe0000-0xdfbfffff irq 48 at device 14.0 on pci3 em0: Ethernet address: 00:13:72:75:12:9c pcib4: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 pci5: <ACPI PCI bus> on pcib5 vgapci0: <VGA-compatible display> mem 0xdd000000-0xddffffff,0xc0000000-0xcfffffff,0xde000000-0xdeffffff irq 16 at device 0.0 on pci5 nvidia0: <Quadro FX 3400> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io vgapci0: Boot video device uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0 usbus0 on uhci0 uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0 usbus1 on uhci1 uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0 usbus2 on uhci2 uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq 16 at device 29.3 on pci0 usbus3 on uhci3 ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 23 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pci6: <serial bus, FireWire> at device 12.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf mem 0xdffffc00-0xdfffffff irq 18 at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 atapci1: <Intel ICH5 SATA150 controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf irq 18 at device 31.2 on pci0 ata2: <ATA channel> at channel 0 on atapci1 ata3: <ATA channel> at channel 1 on atapci1 pcm0: <Intel ICH5 (82801EB)> port 0xec00-0xecff,0xe8c0-0xe8ff mem 0xdffffa00-0xdffffbff,0xdffff900-0xdffff9ff irq 17 at device 31.5 on pci0 pcm0: <Analog Devices AD1981B AC97 Codec> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xd27ff,0xd2800-0xd3fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] acpi_perf0: <ACPI CPU Frequency Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 122700001227 device_attach: est1 attach returned 6 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 122700001227 device_attach: est2 attach returned 6 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 122700001227 device_attach: est3 attach returned 6 random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 Timecounters tick every 1.000 msec aacd0 on aac0 aacd0: 953813MB (1953410816 sectors) usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ugen1.1: <Intel> at usbus1 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen0.1: <Intel> at usbus0 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen3.1: <Intel> at usbus3 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen2.1: <Intel> at usbus2 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ata0: DMA limited to UDMA33, controller found non-ATA66 cable uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 8 ports with 8 removable, self powered ugen4.2: <Kingston> at usbus4 umass0: <Kingston DataTraveler 3.0, class 0/0, rev 2.10/1.00, addr 2> on usbus4 umass0: SCSI over Bulk-Only; quirks = 0xc000 umass0:5:0:-1: Attached to scbus5 ugen0.2: <Microsoft> at usbus0 ukbd0: <Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/7.04, addr 2> on usbus0 kbd2 at ukbd0 ugen3.2: <Logitech> at usbus3 ukbd1: <Logitech USB Receiver, class 0/0, rev 1.10/19.04, addr 2> on usbus3 kbd3 at ukbd1 da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 da0: <Kingston DataTraveler 3.0 PMAP> Removable Direct Access SPC-4 SCSI device da0: Serial Number 60A44C42568CEF31F9895D74 da0: 40.000MB/s transfers da0: 14891MB (30497664 512 byte sectors: 255H 63S/T 1898C) da0: quirks=0x2<NO_6_BYTE> sa0 at ahd0 bus 0 scbus0 target 1 lun 0 sa0: <HP C5683A C305> Removable Sequential Access SCSI-3 device sa0: Serial Number 0001711088 sa0: 40.000MB/s transfers (20.000MHz, offset 32, 16bit) sa0: quirks=0xc<VARIABLE,2FM> cd0 at ata0 bus 0 scbus1 target 0 lun 0 cd0: <PHILIPS SPD6004P HP02> Removable CD-ROM SCSI device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed lapic1: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! lapic6: Forcing LINT1 to edge trigger SMP: AP CPU #2 Launched! lapic7: Forcing LINT1 to edge trigger SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1795653283 Hz quality 1000 Trying to mount root from ufs:/dev/label/root-fs [rw,userquota]... ums0: <Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/7.04, addr 2> on usbus0 ums0: 5 buttons and [XYZT] coordinates ID=26 ums0: 0 buttons and [T] coordinates ID=0 ums1: <Logitech USB Receiver, class 0/0, rev 1.10/19.04, addr 2> on usbus3 uhid0: <Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/7.04, addr 2> on usbus0 ums1: 16 buttons and [XYZ] coordinates ID=1 -- You are receiving this mail because: You are the assignee for the bug.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-200497-13>