From owner-freebsd-usb@FreeBSD.ORG  Fri Feb 18 03:36:56 2011
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34])
	by hub.freebsd.org (Postfix) with ESMTP id 51F09106564A
	for <freebsd-usb@freebsd.org>; Fri, 18 Feb 2011 03:36:56 +0000 (UTC)
	(envelope-from jamesbrandongooch@gmail.com)
Received: from mail-ww0-f50.google.com (mail-ww0-f50.google.com [74.125.82.50])
	by mx1.freebsd.org (Postfix) with ESMTP id AB01C8FC0C
	for <freebsd-usb@freebsd.org>; Fri, 18 Feb 2011 03:36:55 +0000 (UTC)
Received: by wwf26 with SMTP id 26so3241753wwf.31
	for <freebsd-usb@freebsd.org>; Thu, 17 Feb 2011 19:36:54 -0800 (PST)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma;
	h=domainkey-signature:mime-version:in-reply-to:references:date
	:message-id:subject:from:to:content-type:content-transfer-encoding;
	bh=CTuk0EBllqyFUqPmqFHiLttBBPEfDrgkjdUYD+QZq0I=;
	b=tve0XtwJDjgJIuhbhgZQdZBGaz44I5Pg8d6M2whJ8nicvaWYxz2kWoOBu6/E6j9zI6
	OOAVRiM9RecV5tbEy4168mfTNLWYhdn06UhXWN3t0pD/JDJ7r2nswIPJcWMDdpNLCWcQ
	KjqvEcB0GZXE3395Zr2K8nIoAnwtW6TvXxd58=
DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma;
	h=mime-version:in-reply-to:references:date:message-id:subject:from:to
	:content-type:content-transfer-encoding;
	b=CrGF4ZqMblfUP4kv7F+h9XG2VhKyWeOW8wWfdmlMXMZQyqtjDFLalSPGwMTtDb7saY
	+fHmU1dfp4HPU6pIxzTroHtFOgoO67go5jsxuMDCyzylVVTYjrupog1+AlzGf1jYwp9s
	6e/CEMhYJtTeBn5f52iMXeDlIUhkxCZl5voic=
MIME-Version: 1.0
Received: by 10.216.178.138 with SMTP id f10mr148663wem.98.1298000214373; Thu,
	17 Feb 2011 19:36:54 -0800 (PST)
Received: by 10.216.244.130 with HTTP; Thu, 17 Feb 2011 19:36:54 -0800 (PST)
In-Reply-To: <AANLkTi=YgTF434WgoF7w1B=y2rTBW_6Jqg3g3ncuy4-d@mail.gmail.com>
References: <AANLkTi=YgTF434WgoF7w1B=y2rTBW_6Jqg3g3ncuy4-d@mail.gmail.com>
Date: Thu, 17 Feb 2011 21:36:54 -0600
Message-ID: <AANLkTimWvyR2vEi8iecw05KoRYo3egxT378eWqKsDN03@mail.gmail.com>
From: Brandon Gooch <jamesbrandongooch@gmail.com>
To: fli@shapeshifter.se, freebsd-usb@freebsd.org
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Cc: 
Subject: Re: New uhso(4) device: Globetrotter HSUPA Modem Option N.V.
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
	<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
	<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Fri, 18 Feb 2011 03:36:56 -0000

On Thu, Feb 17, 2011 at 6:58 PM, Brandon Gooch
<jamesbrandongooch@gmail.com> wrote:
> I've recently got my hands on an Option N.V. Globetrotter HSUPA Modem,
> rev 2.00/0.00, addr 2.
>
> Here's the usbconfig dump:
>
> ugen6.2: <Globetrotter HSUPA Modem Option N.V.> at usbus6, cfg=3D0
> md=3DHOST spd=3DHIGH (480Mbps) pwr=3DON
>
> =C2=A0bLength =3D 0x0012
> =C2=A0bDescriptorType =3D 0x0001
> =C2=A0bcdUSB =3D 0x0200
> =C2=A0bDeviceClass =3D 0x00ff
> =C2=A0bDeviceSubClass =3D 0x00ff
> =C2=A0bDeviceProtocol =3D 0x00ff
> =C2=A0bMaxPacketSize0 =3D 0x0040
> =C2=A0idVendor =3D 0x0af0
> =C2=A0idProduct =3D 0x7a05
> =C2=A0bcdDevice =3D 0x0000
> =C2=A0iManufacturer =3D 0x0002 =C2=A0<Option N.V.>
> =C2=A0iProduct =3D 0x0001 =C2=A0<Option Configuration>
> =C2=A0iSerialNumber =3D 0x0000 =C2=A0<no string>
> =C2=A0bNumConfigurations =3D 0x0001
>
> After adding the product to sys/dev/usb/usbdevs:
>
> product OPTION GTHSUPA_2 =C2=A0 =C2=A0 =C2=A0 =C2=A00x7a05 =C2=A0Globetro=
tter HSUPA
>
> and =C2=A0sys/dev/usb/net/uhso.c:
>
> UHSO_DEV(OPTION, GTHSUPA_2, UHSO_AUTO_IFACE),
>
> ...I got the driver to attach. Here's the message when I plug the device =
in:
>
> ugen6.2: <Option N.V.> at usbus6
> uhso0: <Diagnostic port> at <Option N.V. Globetrotter HSUPA Modem> on uhu=
b6
> uhso0: "Diagnostic" port at cuaU0
> uhso1: <Application port> at <Option N.V. Globetrotter HSUPA Modem> on uh=
ub6
> uhso1: "Application" port at cuaU1
> uhso2: <Control port> at <Option N.V. Globetrotter HSUPA Modem> on uhub6
> uhso2: "Control" port at cuaU2
> uhso0: bpf attached
> uhso3: <Network port> at <Option N.V. Globetrotter HSUPA Modem> on uhub6
> uhso4: <Modem port> at <Option N.V. Globetrotter HSUPA Modem> on uhub6
> uhso4: "Modem" port at cuaU3
> umass0: <Option N.V. Globetrotter HSUPA Modem, rev 2.00/0.00, addr 2> on =
usbus6
> umass0: =C2=A0SCSI over Bulk-Only; quirks =3D 0x0000
> umass0:3:0:-1: Attached to scbus3
> (probe0:umass-sim0:0:0:0): SCSI status error
> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI status: Check Condition
> (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not pre=
sent)
> (probe0:umass-sim0:0:0:0): Error 6, Unretryable error
> GEOM: new disk da0
> pass2 at umass-sim0 bus 0 scbus3 target 0 lun 0
> pass2: <SD HSUPA Modem > Removable Direct Access SCSI-2 device
> pass2: 40.000MB/s transfers
> (da0:umass-sim0:0:0:0): SCSI status error
> (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> (da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not presen=
t)
> (da0:umass-sim0:0:0:0): Error 6, Unretryable error
> da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
> da0: <SD HSUPA Modem > Removable Direct Access SCSI-2 device
> da0: 40.000MB/s transfers
> da0: Attempt to query device size failed: NOT READY, Medium not present
> (da0:umass-sim0:0:0:0): SCSI status error
> (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> (da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not presen=
t)
> (da0:umass-sim0:0:0:0): Error 6, Unretryable error
> Opened disk da0 -> 6
> (da0:umass-sim0:0:0:0): SCSI status error
> (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> (da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not presen=
t)
> (da0:umass-sim0:0:0:0): Error 6, Unretryable error
> Opened disk da0 -> 6
> (da0:umass-sim0:0:0:0): SCSI status error
> (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> (da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not presen=
t)
> (da0:umass-sim0:0:0:0): Error 6, Unretryable error
> Opened disk da0 -> 6
> (da0:umass-sim0:0:0:0): SCSI status error
> (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> (da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not presen=
t)
> (da0:umass-sim0:0:0:0): Error 6, Unretryable error
> Opened disk da0 -> 6
> (da0:umass-sim0:0:0:0): SCSI status error
> (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> (da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not presen=
t)
> (da0:umass-sim0:0:0:0): Error 6, Unretryable error
> Opened disk da0 -> 6
> (da0:umass-sim0:0:0:0): SCSI status error
> (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> (da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not presen=
t)
> (da0:umass-sim0:0:0:0): Error 6, Unretryable error
> Opened disk da0 -> 6
>
> Here's the relevant output via sysctl(1):
>
> dev.uhso.0.%desc: Diagnostic
> dev.uhso.0.%driver: uhso
> dev.uhso.0.%location: bus=3D1 hubaddr=3D1 port=3D6 devaddr=3D2 interface=
=3D0
> dev.uhso.0.%pnpinfo: vendor=3D0x0af0 product=3D0x7a05 devclass=3D0xff
> devsubclass=3D0xff sernum=3D"" release=3D0x0000 intclass=3D0xff
> intsubclass=3D0xff ttyname=3DU0 ttyports=3D1
> dev.uhso.0.%parent: uhub6
> dev.uhso.0.type: Serial
> dev.uhso.0.radio: 1
> dev.uhso.0.ports: 1
> dev.uhso.0.port.diagnostic.tty: cuaU0
> dev.uhso.0.port.diagnostic.desc: Diagnostic
> dev.uhso.1.%desc: Application
> dev.uhso.1.%driver: uhso
> dev.uhso.1.%location: bus=3D1 hubaddr=3D1 port=3D6 devaddr=3D2 interface=
=3D3
> dev.uhso.1.%pnpinfo: vendor=3D0x0af0 product=3D0x7a05 devclass=3D0xff
> devsubclass=3D0xff sernum=3D"" release=3D0x0000 intclass=3D0xff
> intsubclass=3D0xff ttyname=3DU1 ttyports=3D1
> dev.uhso.1.%parent: uhub6
> dev.uhso.1.type: Serial
> dev.uhso.1.radio: 1
> dev.uhso.1.ports: 1
> dev.uhso.1.port.application.tty: cuaU1
> dev.uhso.1.port.application.desc: Application
> dev.uhso.2.%desc: Control
> dev.uhso.2.%driver: uhso
> dev.uhso.2.%location: bus=3D1 hubaddr=3D1 port=3D6 devaddr=3D2 interface=
=3D4
> dev.uhso.2.%pnpinfo: vendor=3D0x0af0 product=3D0x7a05 devclass=3D0xff
> devsubclass=3D0xff sernum=3D"" release=3D0x0000 intclass=3D0xff
> intsubclass=3D0xff ttyname=3DU2 ttyports=3D1
> dev.uhso.2.%parent: uhub6
> dev.uhso.2.type: Serial
> dev.uhso.2.radio: 1
> dev.uhso.2.ports: 1
> dev.uhso.2.port.control.tty: cuaU2
> dev.uhso.2.port.control.desc: Control
> dev.uhso.3.%desc: Network
> dev.uhso.3.%driver: uhso
> dev.uhso.3.%location: bus=3D1 hubaddr=3D1 port=3D6 devaddr=3D2 interface=
=3D5
> dev.uhso.3.%pnpinfo: vendor=3D0x0af0 product=3D0x7a05 devclass=3D0xff
> devsubclass=3D0xff sernum=3D"" release=3D0x0000 intclass=3D0xff
> intsubclass=3D0xff
> dev.uhso.3.%parent: uhub6
> dev.uhso.3.netif: uhso0
> dev.uhso.3.type: Network
> dev.uhso.3.radio: 1
> dev.uhso.4.%desc: Modem
> dev.uhso.4.%driver: uhso
> dev.uhso.4.%location: bus=3D1 hubaddr=3D1 port=3D6 devaddr=3D2 interface=
=3D6
> dev.uhso.4.%pnpinfo: vendor=3D0x0af0 product=3D0x7a05 devclass=3D0xff
> devsubclass=3D0xff sernum=3D"" release=3D0x0000 intclass=3D0xff
> intsubclass=3D0xff ttyname=3DU3 ttyports=3D1
> dev.uhso.4.%parent: uhub6
> dev.uhso.4.type: Serial
> dev.uhso.4.radio: 1
> dev.uhso.4.ports: 1
> dev.uhso.4.port.modem.tty: cuaU3
> dev.uhso.4.port.modem.desc: Modem
>
> I haven't been able to get the device to work yet. I really don't know
> exactly what I'm doing though :)
>
> I have been able to get the device to respond to this command:
>
> brandon@x300:~$ sudo uhsoctl -a wap.cingular -r /etc/resolv.conf uhso0
> Registered to "AT&T" (UMTS)
>
> Also, I tried doing something like this (as per the uhso(4) man page):
>
> brandon@x300:~$ sudo cu -l /dev/cuaU2
> Connected
> uhso2: failed to set ctrl line state to 0x01: USB_ERR_TIMEOUT
> uhso2: failed to set ctrl line state to 0x03: USB_ERR_TIMEOUT
> =DE=AD=EF=BF=BD=EF=BF=BD=EF=BF=BDT+CGDCONT=3D1,,
> OK
> uhso1: failed to set ctrl line state to 0x01: USB_ERR_TIMEOUT
> uhso1: failed to set ctrl line state to 0x03: USB_ERR_TIMEOUT
> _OWANCALL: 1, 1
> a=DE=AD=EF=BF=BD=EF=BF=BDa=DE=AD=EF=BF=BD=EF=BF=BDA=DE=AD=EF=BF=BD=EF=BF=
=BDA=DE=AD=EF=BF=BD=EF=BF=BDA=DE=AD=EF=BF=BD=EF=BF=BDA=DE=AD=EF=BF=BD=EF=BF=
=BDA=DE=AD=EF=BF=BD=EF=BF=BDA=DE=AD=EF=BF=BD=DE=AD=EF=BF=BD=EF=BF=BDA=DE=AD=
=EF=BF=BD=DE=AD=EF=BF=BD=EF=BF=BD
>
> That's where I'm stuck.
>
> -Brandon
>

A little more output with debugging options enabled in build:

brandon@x300:~$ sudo uhsoctl -a wap.cingular -u WAP@CINGULARGPRS.COM
-k CINGULAR1 uhso0
sysctl dev.uhso.0.%driver returned(0): uhso
sysctl dev.uhso.0.netif returned(-1): FAILED
sysctl dev.uhso.1.%driver returned(0): uhso
sysctl dev.uhso.1.netif returned(-1): FAILED
sysctl dev.uhso.2.%driver returned(0): uhso
sysctl dev.uhso.2.netif returned(-1): FAILED
sysctl dev.uhso.3.%driver returned(0): uhso
sysctl dev.uhso.3.netif returned(0): uhso0
sysctl dev.uhso.3.%location returned(0): bus=3D1 hubaddr=3D1 port=3D6
devaddr=3D2 interface=3D5
USB port location=3D6
sysctl dev.uhso.0.port.control.tty returned(-1): FAILED
sysctl dev.uhso.0.port.application.tty returned(-1): FAILED
sysctl dev.uhso.0.port.application2.tty returned(-1): FAILED
sysctl dev.uhso.1.port.control.tty returned(-1): FAILED
sysctl dev.uhso.1.port.application.tty returned(0): cuaU1
sysctl dev.uhso.1.port.application2.tty returned(-1): FAILED
sysctl dev.uhso.2.port.control.tty returned(0): cuaU2
sysctl dev.uhso.2.port.application.tty returned(-1): FAILED
sysctl dev.uhso.2.port.application2.tty returned(-1): FAILED
sysctl dev.uhso.3.port.control.tty returned(-1): FAILED
sysctl dev.uhso.3.port.application.tty returned(-1): FAILED
sysctl dev.uhso.3.port.application2.tty returned(-1): FAILED
sysctl dev.uhso.4.port.control.tty returned(-1): FAILED
sysctl dev.uhso.4.port.application.tty returned(-1): FAILED
sysctl dev.uhso.4.port.application2.tty returned(-1): FAILED
tty list:
         /dev/cuaU1
         /dev/cuaU2
Attempting to open /dev/cuaU1
SYNC_CMD: AT
SYNC_RESP: AT
SYNC_RESP: OK
SYNC_RETVAL=3D0
SYNC_CMD: AT+CPIN?
SYNC_EXP: +CPIN: READY (12)
SYNC_RESP: AT+CPIN?
SYNC_RESP: +CPIN: READY
SYNC_RESP: OK
SYNC_RETVAL=3D0
SYNC_CMD: AT+CGDCONT?
SYNC_EXP: +CGDCONT (8)
SYNC_RESP: AT+CGDCONT?
SYNC_RESP: +CGDCONT: 1,"IP","wap.cingular","0.0.0.0",0,0
Save '+CGDCONT: 1,"IP","wap.cingular","0.0.0.0",0,0'
SYNC_RESP: OK
Save 'OK'
SYNC_RETVAL=3D0
SYNC_CMD: AT$QCPDPP=3D1,1,"WAP@CINGULARGPRS.COM","CINGULAR1"
SYNC_RESP: AT$QCPDPP=3D1,1,"WAP@CINGULARGPRS.COM","CINGULAR1"
SYNC_RESP: OK
SYNC_RETVAL=3D0
SYNC_CMD: AT_OWANCALL=3D1,0,0
SYNC_RESP: AT_OWANCALL=3D1,0,0
SYNC_RESP: OK
SYNC_RETVAL=3D0
CMD: AT+CGREG?
CMD: AT+CREG?
AT_ASYNC_RESP: AT+CGREG?
AT_ASYNC_RESP: +CGREG: 0,1
CMD: AT+COPS?
AT_ASYNC_RESP:
AT_ASYNC_RESP: OK
AT_ASYNC_RESP: AT+CREG?
AT_ASYNC_RESP: +CREG: 0,1
AT_ASYNC_RESP:
AT_ASYNC_RESP: OK
AT_ASYNC_RESP: AT+COPS?
AT_ASYNC_RESP: +COPS: 0,0,"AT&T",2
Registered to "AT&T" (UMTS)
CMD: AT_OWANCALL=3D1,1,1
AT_ASYNC_RESP:
AT_ASYNC_RESP: OK
AT_ASYNC_RESP: AT_OWANCALL=3D1,1,1
AT_ASYNC_RESP: OK
CMD: AT+CGREG?
AT_ASYNC_RESP: AT+CGREG?
AT_ASYNC_RESP: +CGREG: 0,1
AT_ASYNC_RESP:
AT_ASYNC_RESP: OK
CMD: AT+CSQ
AT_ASYNC_RESP: AT+CSQ
AT_ASYNC_RESP: +CSQ: 9,99
AT_ASYNC_RESP:
AT_ASYNC_RESP: OK
CMD: AT+CSQ
AT_ASYNC_RESP: AT+CSQ
AT_ASYNC_RESP: +CSQ: 7,99
AT_ASYNC_RESP:
AT_ASYNC_RESP: OK
CMD: AT+CSQ
AT_ASYNC_RESP: AT+CSQ
AT_ASYNC_RESP: +CSQ: 11,99
AT_ASYNC_RESP:
AT_ASYNC_RESP: OK
CMD: AT+CSQ
AT_ASYNC_RESP: AT+CSQ
AT_ASYNC_RESP: +CSQ: 11,99
AT_ASYNC_RESP:
AT_ASYNC_RESP: OK
CMD: AT+CSQ
AT_ASYNC_RESP: AT+CSQ
AT_ASYNC_RESP: +CSQ: 11,99
AT_ASYNC_RESP:
AT_ASYNC_RESP: OK
CMD: AT+CSQ
AT_ASYNC_RESP: AT+CSQ
AT_ASYNC_RESP: +CSQ: 11,99
AT_ASYNC_RESP:
AT_ASYNC_RESP: OK
CMD: AT+CSQ
...

>From dmesg, with USB_DEBUG and UHSO_DEBUG defined in uhso.c:

ugen6.2: <Option N.V.> at usbus6
ugen6.2: <Option N.V.> at usbus6 (disconnected)
ugen6.2: <Option N.V.> at usbus6
uhso0: <Diagnostic port> at <Option N.V. Globetrotter HSUPA Modem> on uhub6
uhso0: "Diagnostic" port at cuaU0
uhso1: <Application port> at <Option N.V. Globetrotter HSUPA Modem> on uhub=
6
uhso1: "Application" port at cuaU1
uhso2: <Control port> at <Option N.V. Globetrotter HSUPA Modem> on uhub6
uhso2: "Control" port at cuaU2
uhso0: bpf attached
uhso3: <Network port> at <Option N.V. Globetrotter HSUPA Modem> on uhub6
uhso4: <Modem port> at <Option N.V. Globetrotter HSUPA Modem> on uhub6
uhso4: "Modem" port at cuaU3
umass0: <Option N.V. Globetrotter HSUPA Modem, rev 2.00/0.00, addr 2> on us=
bus6
umass0:  SCSI over Bulk-Only; quirks =3D 0x0000
umass0:3:0:-1: Attached to scbus3
(probe0:umass-sim0:0:0:0): SCSI status error
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not prese=
nt)
(probe0:umass-sim0:0:0:0): Error 6, Unretryable error
GEOM: new disk da0
pass2 at umass-sim0 bus 0 scbus3 target 0 lun 0
pass2: <SD HSUPA Modem > Removable Direct Access SCSI-2 device
pass2: 40.000MB/s transfers
(da0:umass-sim0:0:0:0): SCSI status error
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(da0:umass-sim0:0:0:0): Error 6, Unretryable error
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <SD HSUPA Modem > Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): SCSI status error
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(da0:umass-sim0:0:0:0): Error 6, Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): SCSI status error
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(da0:umass-sim0:0:0:0): Error 6, Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): SCSI status error
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(da0:umass-sim0:0:0:0): Error 6, Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): SCSI status error
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(da0:umass-sim0:0:0:0): Error 6, Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): SCSI status error
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(da0:umass-sim0:0:0:0): Error 6, Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): SCSI status error
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(da0:umass-sim0:0:0:0): Error 6, Unretryable error
Opened disk da0 -> 6
uhso1: failed to set ctrl line state to 0x01: USB_ERR_TIMEOUT
uhso1: failed to set ctrl line state to 0x03: USB_ERR_TIMEOUT
uhso1: failed to set ctrl line state to 0x03: USB_ERR_TIMEOUT
uhso1: failed to set ctrl line state to 0x03: USB_ERR_TIMEOUT
uhso1: failed to set ctrl line state to 0x03: USB_ERR_TIMEOUT
uhso1: failed to set ctrl line state to 0x03: USB_ERR_TIMEOUT
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D0, type=3D1[Diagnostic]
uhso_probe_iface: Probing for interface 0, probe_func=3D0xffffffff80e46280
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D0, type=3D1[Diagnostic]
uhso_probe_iface: Probe result 4010006
uhso_alloc_tty: Allocated TTY 0
uhso0: <Diagnostic port> at <Option N.V. Globetrotter HSUPA Modem> on uhub6
uhso0: "Diagnostic" port at cuaU0
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D1, type=3D2[GPS]
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D1, type=3D2[GPS]
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D2, type=3D3[GPS Control]
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D2, type=3D3[GPS Control]
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D3, type=3D4[Application]
uhso_probe_iface: Probing for interface 3, probe_func=3D0xffffffff80e46280
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D3, type=3D4[Application]
uhso_probe_iface: Probe result 4010002
uhso_alloc_tty: Allocated TTY 0
uhso1: <Application port> at <Option N.V. Globetrotter HSUPA Modem> on uhub=
6
uhso1: "Application" port at cuaU1
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D4, type=3D6[Control]
uhso_probe_iface: Probing for interface 4, probe_func=3D0xffffffff80e46280
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D4, type=3D6[Control]
uhso_probe_iface: Probe result 4010001
uhso_alloc_tty: Allocated TTY 0
uhso2: <Control port> at <Option N.V. Globetrotter HSUPA Modem> on uhub6
uhso2: "Control" port at cuaU2
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D5, type=3D7[Network]
uhso_probe_iface: Probing for interface 5, probe_func=3D0xffffffff80e46280
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D5, type=3D7[Network]
uhso_probe_iface: Probe result 3030005
uhso0: bpf attached
uhso3: <Network port> at <Option N.V. Globetrotter HSUPA Modem> on uhub6
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D6, type=3D8[Modem]
uhso_probe_iface: Probing for interface 6, probe_func=3D0xffffffff80e46280
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D6, type=3D8[Modem]
uhso_probe_iface: Probe result 4010004
uhso_alloc_tty: Allocated TTY 0
uhso4: <Modem port> at <Option N.V. Globetrotter HSUPA Modem> on uhub6
uhso4: "Modem" port at cuaU3
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D1, type=3D2[GPS]
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D1, type=3D2[GPS]
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D2, type=3D3[GPS Control]
uhso_probe_iface_auto: actlen=3D17
uhso_probe_iface_auto: index=3D2, type=3D3[GPS Control]
uhso1: failed to set ctrl line state to 0x01: USB_ERR_TIMEOUT
uhso1: failed to set ctrl line state to 0x03: USB_ERR_TIMEOUT

-Brandon