Date: Tue, 10 Jul 2001 14:55:47 -0400 (EDT) From: Kenneth Wayne Culver <culverk@wam.umd.edu> To: Eric Kozowski <eric@routergeeks.net> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: another xfree86 question Message-ID: <Pine.GSO.4.21.0107101455070.14542-100000@rac4.wam.umd.edu> In-Reply-To: <20010710113829.F16356@schooner.routergeeks.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Have you sent this to xpert@xfree86.org? I'm not sure what your error is (I could probably fix it if I were on the machine) but you may be able to get more help from that list. Ken On Tue, 10 Jul 2001, Eric Kozowski wrote: > On Tue, Jul 10, 2001 at 02:35:33PM -0400, Kenneth Wayne Culver wrote: > > That's because there is no file called XF86Config > > try XF86Config.new in your home directory, that's where it should be, or > > just copy it to /etc/X11/XF86Config > > already did that. here's the full error: > > > > XFree86 Version 4.0.3 / X Window System > (protocol Version 11, revision 0, vendor release 6400) > Release Date: 16 March 2001 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/FAQ) > Operating System: FreeBSD 4.3 i386 [ELF] > Module Loader present > (==) Log file: "/var/log/XFree86.0.log", Time: Tue Jul 10 11:35:33 2001 > (==) Using config file: "/etc/X11/XF86Config" > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (??) unknown. > (==) ServerLayout "XFree86 Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Card0" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (**) XKB: model: "pc104" > (**) XKB: layout: "us" > (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (**) ModulePath set to "/usr/X11R6/lib/modules" > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 > > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 0.1.0 > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 0.1.0 > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (--) PCI:*(1:0:0) ATI Rage 128 RF rev 0, Mem @ 0xd4000000/26, 0xd9000000/14, I/O @ 0xd000/8 > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Module GLcore: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a > (II) Module dri: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a > (II) Module drm: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a > (II) Module glx: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a > (II) Module pex5: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.13.0 > (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a > (II) Module xie: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o > (II) Module r128: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 4.0.1 > (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o > (II) Module ati: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 6.2.3 > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > (II) ATI: ATI driver (version 6.2.3) for chipsets: ati, ativga > (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI), > ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI), > ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (AGP), > ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI), > ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP), > ATI Rage 128 Mobility ML (AGP) > (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), > ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP) > (WW) R128: Chipset "ati" in Device section "Card0" isn't valid for this driver > (EE) No devices detected. > > Fatal server error: > no screens found > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to xfree86@xfree86.org. > > X connection to :0.0 broken (explicit kill or server shutdown). > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.21.0107101455070.14542-100000>