Date: Thu, 27 Dec 2001 14:39:55 -0800 (PST) From: Matthew Dillon <dillon@apollo.backplane.com> To: Andrew Stuart <elitetek@tekrealm.net> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Via 686B southbrige corruption.. Message-ID: <200112272239.fBRMdtj89631@apollo.backplane.com> References: <20011227105219.A30619@freebsd.tekrealm.net>
next in thread | previous in thread | raw e-mail | index | archive | help
:i dont have a via686b chipset.. but am having simular issues.. :i can repeatedly panic the system by transfering large amounts :of files from a pci adaptec 29160 to a ide harddrive, and also :ide to ide harddrive.. : :pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 :on pci0 :atapci0: <VIA 82C596 ATA66 controller> port 0xd000-0xd00f at device 7.1 :on pci0 :ata0: at 0x1f0 irq 14 on atapci0 :ata1: at 0x170 irq 15 on atapci0 :ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xdc00-0xdcff mem :0xe310a000-0xe310afff irq 5 at device 18.0 on pci0 :aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs :ad0: 39082MB <Maxtor 54098U8> [79406/16/63] at ata0-master UDMA66 :da0 at ahc0 bus 0 target 0 lun 0 :da0: <IBM DDYS-T18350N S93E> Fixed Direct Access SCSI-3 device :da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged :Queueing Enabled :da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) : :i have also tested going from scsi to scsi and dont seem to have :the issue. this is on known good hardware. : :-- :Andrew This is similar to the chipset that Brady has. Same bridge chip anyway. pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C586 ATA33 controller> port 0xe400-0xe40f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 5 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered -Matt Matthew Dillon <dillon@backplane.com> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200112272239.fBRMdtj89631>