Date: Sun, 19 Sep 1999 23:32:53 +0300 From: "Ertan Kucukoglu" <ertank@hotpop.com> To: "FreeBSD" <FreeBSD-questions@FreeBSD.ORG> Subject: silo overflow (PC Celeron 300) Message-ID: <007a01bf02de$39c573a0$c592fcd4@Ertan>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hello, When I try to make ppp connection my kernel says: Sep 19 21:38:51 darkstar /kernel: sio3: 1 more silo overflow (total 1) I tried to manually connect. After a short while from that message it says NO CARRIER and hangs up. Here is the output of ppp messages: ----- # ppp superonline Working in interactive mode Using interface: tun0 Warning: Carrier: Invalid log value Warning: Usage: set log [local] [+|-]async|cbcp|ccp|chat|command|connect|debug|hdlc|id0|ipcp|lcp|lqm|phase|t cp/ip|timer|tun... Warning: Too many idle timeout values Warning: set timeout: Failed 1 ppp ON darkstar> term deflink: Entering terminal mode on /dev/cuaa3 Type `~?' for help atdt0,822,2120003 CONNECT 115200 User Access Verification Username: <USER> Password: <PASS> Session Started Entering PPP mode. Async interface address is unnumbered (Loopback0) Your IP address is 212.252.145.49. MTU is 1500 bytes. Header compressio... (here kernel gives the message) NO CARRIER ----- I also attached kernel configuration file and dmesg-result as well. I do not know how to correct this problem. (I am a newbie) Although if there is some other information needed please inform. Thanks in advance. Ertan Kucukoglu ertank@softhome.net [-- Attachment #2 --] # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # <URL:http://www.FreeBSD.ORG/>; # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.143.2.12 1999/05/14 15:12:26 jkh Exp $ machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident MYKERNEL maxusers 32 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM #device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. #controller ncr0 controller ahb0 controller ahc0 controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. controller dpt0 #controller adv0 at isa? port ? cam irq ? controller adw0 #controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 #device mcd0 at isa? port 0x300 bio irq 10 #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 9 device sio2 at isa? port "IO_COM3" tty irq 5 device sio3 at isa? port "IO_COM4" tty irq 3 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? # # The following Ethernet NICs are all PCI devices. # #device ax0 # ASIX AX88140A #device de0 # DEC/Intel DC21x4x (``Tulip'') #device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) #device mx0 # Macronix 98713/98715/98725 (``PMAC'') #device pn0 # Lite-On 82c168/82c169 (``PNIC'') #device rl0 # RealTek 8129/8139 #device tl0 # Texas Instruments ThunderLAN #device tx0 # SMC 9432TX (83c170 ``EPIC'') device vr0 # VIA Rhine, Rhine II #device vx0 # 3Com 3c590, 3c595 (``Vortex'') #device wb0 # Winbond W89C840F device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ed0 at isa? port 0x300 net irq 3 iomem 0xd8000 #device ie0 at isa? port 0x300 net irq 3 iomem 0xd0000 #device ep0 at isa? port 0x300 net irq 10 device ex0 at isa? port? net irq? #device fe0 at isa? port 0x300 net irq ? #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 net irq 10 drq 0 #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVMSG options SYSVSEM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. #pseudo-device bpfilter 4 #Berkeley packet filter [-- Attachment #3 --] Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.2-RELEASE #5: Sun Sep 19 21:24:55 EEST 1999 ertan@darkstar.freebsd:/usr/src/sys/compile/MYKERNEL Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Xeon/Celeron (299.94-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x650 Stepping=0 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>> real memory = 67043328 (65472K bytes) avail memory = 62095360 (60640K bytes) Bad SMBIOS table checksum! Bad DMI table checksum! Preloaded elf kernel "kernel" at 0xc02f8000. Probing for devices on PCI bus 0: chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0 chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0 chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0 ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1 chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3 ahc0: <Adaptec 2940B Ultra SCSI adapter> rev 0x01 int a irq 9 on pci0.9.0 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs Probing for devices on PCI bus 1: vga0: <VGA-compatible display device> rev 0x01 int a irq 10 on pci1.0.0 Probing for PnP devices: CSN 1 Vendor ID: CSC4835 [0x3548630e] Serial 0xffffffff Comp ID: @@@0000 [0x00000000] Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x300 atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model IntelliMouse, device ID 3 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1: configured irq 9 not in bitmap of probed irqs 0x8 sio1 at 0x2f8-0x2ff irq 9 on isa sio1: type 16550A sio2: configured irq 5 not in bitmap of probed irqs 0 sio2 not found at 0x3e8 sio3: configured irq 3 not in bitmap of probed irqs 0 sio3 at 0x2e8-0x2ef irq 3 on isa sio3: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <ST31720A> wd0: 1625MB (3329424 sectors), 3303 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 1 (atapi): <CD-ROM TW 160D/V1.30>, removable, dma, iordy acd0: drive speed 689 - 2062KB/sec, 240KB cache acd0: supported read types: CD-R, CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked wt0 not found at 0x300 ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ppi0: <generic parallel i/o> on ppbus 0 plip0: <PLIP network interface> on ppbus 0 lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ex0 not found vga0 at 0x3c0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface Waiting 5 seconds for SCSI devices to settle changing root device to wd0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?007a01bf02de$39c573a0$c592fcd4>