Date: Sun, 4 May 2014 04:16:36 GMT From: fei <877172721@qq.com> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/189328: cannot use cdrecord burn cd Message-ID: <201405040416.s444GaKr001831@cgiserv.freebsd.org> Resent-Message-ID: <201405040420.s444K0Cb070467@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 189328 >Category: i386 >Synopsis: cannot use cdrecord burn cd >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun May 04 04:20:00 UTC 2014 >Closed-Date: >Last-Modified: >Originator: fei >Release: cdrtools-3.00.tar >Organization: ava >Environment: Linux fei-virtual-machine 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686 i686 i386 GNU/Linux >Description: root@fei-virtual-machine:/home/fei# cdrecord -v dev=1,0,0 -multi -ignsize -xa lian.iso cdrecord: No write mode specified. cdrecord: Assuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 J�rg Schilling TOC Type: 3 = CD-ROM XA mode 2 scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.5.34 Using libscg version 'schily-0.9'. SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'NECVMWar' Identifikation : 'VMware IDE CDR10' Revision : '1.00' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Current: DVD-RW sequential recording Profile: DVD-R/DL layer jump recording Profile: DVD-R/DL sequential recording Profile: DVD+R/DL Profile: DVD+R Profile: DVD+RW Profile: DVD-RW sequential recording (current) Profile: DVD-RW restricted overwrite (current) Profile: DVD-RAM Profile: DVD-R sequential recording Profile: DVD-ROM (current) Profile: CD-RW Profile: CD-R Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd). Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE Supported modes: PACKET SAO LAYER_JUMP Drive buf size : 688128 = 672 KB cdrecord: Warning: Cannot read drive buffer. cdrecord: Warning: The DMA speed test has been skipped. FIFO size : 4194304 = 4096 KB Track 01: data 146 MB Total size: 146 MB = 75246 sectors Current Secsize: 2048 WARNING: Phys disk size 250608 differs from rzone size 0! Prerecorded disk? WARNING: Phys start: 196608 Phys end 447215 WARNING: Drive returns zero media size. Using media size from ADIP. Blocks total: 250608 Blocks current: -6160 Blocks remaining: -81406 cdrecord: Data does not fit on current disk. cdrecord: Notice: -overburn is not expected to work with DVD/BD media. cdrecord: Notice: Overburning active. Trying to write more than the official disk capacity. Reducing transfer size from 64512 to 32768 bytes. Starting to write CD/DVD/BD at speed 2 in real SAO mode for multi session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Starting new track at sector: 0 Track 03: 0 of 146 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 10 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0 Sense flags: Blk 0 (valid) cmd finished after 0.010s timeout 100s write track data: error after 0 bytes cdrecord: The current problem looks like a buffer underrun. cdrecord: Try to use 'driveropts=burnfree'. cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up. Writing time: 5.045s Average write speed 22.1x. Fixating... cdrecord: Input/output error. close track/session: scsi sendcmd: no error CDB: 5B 01 02 00 00 02 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 05 00 00 00 00 0A 00 00 00 00 72 04 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x72 Qual 0x04 (empty or partially written reserved track) Fru 0x0 Sense flags: Blk 0 (valid) cmd finished after 0.007s timeout 480s Fixating time: 0.008s cdrecord: fifo had 128 puts and 1 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. >How-To-Repeat: if not use -overburn,the erro message is like that : WARNING: Drive returns zero media size. Using media size from ADIP. Blocks total: 250608 Blocks current: -6160 Blocks remaining: -81406 cdrecord: Data does not fit on current disk. cdrecord: Notice: -overburn is not expected to if use -overburn ,it turns like the problems before. >Fix: i have no idea >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201405040416.s444GaKr001831>