Date: Tue, 26 Apr 2011 22:35:27 +0300 From: George Kontostanos <gkontos.mail@gmail.com> To: Alexander Motin <mav@freebsd.org> Cc: FreeBSD Stable <freebsd-stable@freebsd.org> Subject: Re: Promise SATA controller issues... Message-ID: <BANLkTimkvfQHNjtWOxHZcqD=bJuD1hsW8Q@mail.gmail.com> In-Reply-To: <4DB71C65.7070700@FreeBSD.org> References: <mailpost.1303845053.5718357.47999.mailing.freebsd.stable@FreeBSD.cs.nctu.edu.tw> <4DB71C65.7070700@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Please let me know what kind of information might be also useful.
glabel list | grep ad8
Geom name: ad8
Providers:
1. Name: label/zdisk3
Mediasize: 640135028224 (596G)
Sectorsize: 512
Mode: r1w1e1
secoffset: 0
offset: 0
seclength: 1250263727
length: 640135028224
index: 0
Consumers:
1. Name: ad8
Mediasize: 640135028736 (596G)
Sectorsize: 512
Mode: r1w1e2
dmesg:
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-STABLE #3: Thu Apr 21 15:23:08 EEST 2011
gkontos@hp.aicom.loc:/usr/obj/usr/src/sys/ML110G3 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 3.20GHz (3200.13-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf64 Family = f Model = 6 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe4bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,CNXT-ID,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4111331328 (3920 MB)
ACPI APIC Table: <HP OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HP OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci7: <ACPI PCI bus> on pcib2
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004101>
mem 0xfeaf0000-0xfeafffff irq 17 at device 0.0 on pci7
bge0: CHIP ID 0x00004101; ASIC REV 0x04; CHIP REV 0x41; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:13:21:cc:39:35
bge0: [ITHREAD]
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xdc00-0xdc1f irq 23
at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xd880-0xd89f irq 19
at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xd800-0xd81f irq 18
at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe9ffc00-0xfe9fffff
irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib3
atapci0: <Promise PDC40718 SATA300 controller> port
0xec00-0xec7f,0xe800-0xe8ff mem 0xfebff000-0xfebfffff,0xfebc0000-0xfebdffff
irq 16 at device 0.0 on pci8
atapci0: [ITHREAD]
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: SIGNATURE: 00000101
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: SIGNATURE: 00000101
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: SIGNATURE: 00000101
ata5: [ITHREAD]
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem
0xe8000000-0xefffffff,0xfebb0000-0xfebbffff irq 16 at device 2.0 on pci8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
atapci2: <Intel ICH7 SATA300 controller> port
0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f mem
0xfe9ff800-0xfe9ffbff irq 19 at device 31.2 on pci0
atapci2: [ITHREAD]
atapci2: AHCI called from vendor specific driver
atapci2: AHCI v1.10 controller with 4 3Gbps ports, PM not supported
ata6: <ATA channel 0> on atapci2
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
ata7: [ITHREAD]
ata8: <ATA channel 2> on atapci2
ata8: [ITHREAD]
ata9: <ATA channel 3> on atapci2
ata9: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xcdfff,0xcf800-0xd47ff,0xd4800-0xd57ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 102400001024
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 102400001024
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is
present;
to enable, add "vfs.zfs.prefetch_disable=0" to
/boot/loader.conf.
ZFS filesystem version 4
ZFS storage pool version 15
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ad6: 610480MB <WDC WD6401AALS-00J7B1 05.00K05> at ata3-master UDMA100 SATA
3Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ad8: 610480MB <WDC WD6402AAEX-00Y9A0 05.01D05> at ata4-master UDMA100 SATA
3Gb/s
ad10: 610480MB <WDC WD6401AALS-00J7B1 05.00K05> at ata5-master UDMA100 SATA
3Gb/s
ad12: 238475MB <Seagate ST3250410AS 3.AAA> at ata6-master UDMA100 SATA
1.5Gb/s
ad14: 238475MB <Seagate ST3250410AS 3.AAA> at ata7-master UDMA100 SATA
1.5Gb/s
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3
uhub3: 6 ports with 6 removable, self powered
Trying to mount root from zfs:zroot
ugen0.2: <American Power Conversion> at usbus0
bge0: link state changed to UP
On Tue, Apr 26, 2011 at 10:26 PM, Alexander Motin <mav@freebsd.org> wrote:
>
>
> There was no changes specific to the Promise controllers for a long
> time. Mostly because I have no any documentation for them. For the same
> reason I hardly can say what could be wrong there. Some additional
> information is definitely required.
>
> --
> Alexander Motin
>
--
George Kontostanos
aisecure.net <http://www.aisecure.net>;
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BANLkTimkvfQHNjtWOxHZcqD=bJuD1hsW8Q>