Date: Sat, 26 Jul 2014 19:40:54 +0200 From: Daniele Mazzotti <kappei84@gmail.com> To: Kevin Oberman <rkoberman@gmail.com> Cc: "freebsd-acpi@freebsd.org" <freebsd-acpi@freebsd.org> Subject: Re: ACPI support - Freebsd 10 on Sony Vaio VPCCA3C5E Message-ID: <CAC=ypSWzXKX1iEtFpN1e_CoMEmtnY21Nq7cNP%2BXAZU3EWPUCGg@mail.gmail.com> In-Reply-To: <CAN6yY1uF9KBeDEf-GuwyE90c011p4pwbNrHiTbCkCy7V=QfT7A@mail.gmail.com> References: <20140722033156.E8638@sola.nimnet.asn.au> <1405965655.15937.YahooMailAndroidMobile@web181606.mail.ne1.yahoo.com> <CAC=ypSV1w0V0Vg2N0fZQK-VOh5Pzm3t7Cnch9xT=HYMjxcvqtw@mail.gmail.com> <20140721213352.GA64025@hell> <CAC=ypSVkOJQuWdGW10Duz2TWFv4L5deZ7uHwjFKPpUtWC_72ig@mail.gmail.com> <20140722180506.GA67094@hell> <CAC=ypSV8uVZ4w4SGXLexifnGvm874rTbs8iueaprp5J_XnFN4w@mail.gmail.com> <20140725221954.GA42012@hell> <CAN6yY1s_YY4E5ZFUgS6eHhPgfP2HESYZaE_zwbXTXKignfQfcA@mail.gmail.com> <CAC=ypSWnk2ju9HKpk_6=Tuymmi_HyLp1RxBC4ZPf7anxTwN3DA@mail.gmail.com> <CAN6yY1shJaSWZJFsnqDs-C0bcf554Es5GgEhDgO6pbUf94NtZA@mail.gmail.com> <CAN6yY1uF9KBeDEf-GuwyE90c011p4pwbNrHiTbCkCy7V=QfT7A@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Kevin, that is a good news but I have a RELEASE therefore if I am not wrong I should recompile my kernel. Did I miss something? Cheers, Daniele. 2014-07-26 18:52 GMT+02:00 Kevin Oberman <rkoberman@gmail.com>: > On Sat, Jul 26, 2014 at 9:31 AM, Kevin Oberman <rkoberman@gmail.com> > wrote: > >> On Sat, Jul 26, 2014 at 1:46 AM, Daniele Mazzotti <kappei84@gmail.com> >> wrote: >> >>> Hi, >>> >>> thanks again for your precious help. The suspend mode is not working yet >>> as VESA option is still in my kernel configuration. I wanted to wait before >>> removing it as I was not sure that intel video driver would have worked. My >>> intention was to have a working setup with intel and being able to switch >>> amongst vt(s) before getting rid of vesa, as I would peferer having the >>> possibility to switch amongst vt(s) than putting my laptop to suspend. >>> >>> By the way I have a 10-RELEASE therefore I suspect I will have to >>> recompile the kernel with VT. Did I get you right? >>> >>> I googled a bit and it seems that the only thing I have to do is to add >>> these devices to my kernel: >>> >>> device vt >>> device vt_vga >>> >>> This is the source I am referring to: https://wiki.freebsd.org/Newcons. >>> Is this it? >>> >>> Cheers and thanks again, >>> Daniele. >>> >>> >> Maybe and maybe not. The wiki page needs updating. >> >> Look at /sys/ARCH/conf for a VT configuration. If it is there, just build >> a kernel with: >> # make buildkernel kernconf=VT && make installkernel kernconf=VT >> (You probably want to add a reasonable -j option for your hardware to >> the buildkernel.) >> >> If you don't have a VT config file, than just set the kern.vty=vt >> loadable in /boot/loader.conf. No need to build a new kernel. >> > > I just looked at teh repo an can say that just adding kern.vty=vt to > /boot/loader.conf will work on head r 267965 or newer and 10-Stable r268366 > or newer. Looks like this has not been MFCed to 9. > > -- > R. Kevin Oberman, Network Engineer, Retired > E-mail: rkoberman@gmail.com > > > >>> >>> 2014-07-26 8:14 GMT+02:00 Kevin Oberman <rkoberman@gmail.com>: >>> >>>> On Fri, Jul 25, 2014 at 3:19 PM, Bykov Vladislav <> <envolyse@gmail.com >>>> > wrote: >>>> >>>>> On Fri, Jul 25, 2014 at 10:43:11PM +0200, Daniele Mazzotti wrote: >>>>> > The error I get anytime I try to switch between terminals is the >>>>> following >>>>> > one " drmDropMaster failed: Unknown error: -22" >>>>> This is okay, if you can't switch back to tty after starting Xorg in >>>>> KMS >>>>> mode using old syscons driver. There is already work going on with new >>>>> driver, vt. I didn't test it though. >>>>> >>>>> At least, suspend is works now? >>>>> >>>> >>>> Try adding kern.vty=vt to /boot/loader.conf. In recent 9-stable, >>>> 10-stable, and head kernels, this is all it takes to switch to vt(4). If >>>> you have an older kernel or are running any release, you will need to >>>> rebuild the kernel using the VT configuration. The loader option may have >>>> made 9.3, but I'm not sure. I don't believe vt(4) is available for 8. >>>> -- >>>> R. Kevin Oberman, Network Engineer, Retired >>>> E-mail: rkoberman@gmail.com >>>> >>>> >>> >>> >> >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAC=ypSWzXKX1iEtFpN1e_CoMEmtnY21Nq7cNP%2BXAZU3EWPUCGg>