Date: Mon, 27 Jan 2014 02:51:43 +0000 From: Miguel Clara <miguelmclara@gmail.com> To: =?ISO-8859-1?Q?Jean=2DS=E9bastien_P=E9dron?= <dumbbell@freebsd.org> Cc: freebsd-x11@freebsd.org Subject: Re: Newcons radeonkms - Failed to load firmware "radeonkmsfw_TURKS_PFP" Message-ID: <CADGo8CXecqTPnhzVMH=W%2BkXH%2BMcbPZqw-Jamjkc3p8beoxLM5A@mail.gmail.com> In-Reply-To: <CADGo8CUr5yJJ=gqN9VpAwGTtx4XUO05Hk=3KcjoAJhJNBK7CKw@mail.gmail.com> References: <1367fd4d-9128-4df0-a250-fb3c1f67f0c5@email.android.com> <52E42A3A.7000901@FreeBSD.org> <712a6e8d-e34b-4321-8c23-aa9edfe6147f@email.android.com> <52E435A3.6010900@FreeBSD.org> <1ab937f2-aca2-41d0-a1a7-a7eb232b9c83@email.android.com> <80c382e1-4442-4699-9aa1-40236a6c072f@email.android.com> <52E59896.3050800@FreeBSD.org> <CADGo8CUr5yJJ=gqN9VpAwGTtx4XUO05Hk=3KcjoAJhJNBK7CKw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Just a note about brightness I can do this: xrandr --output LVDS1 --brightness 0.5 And it seems to dimm the screen backlight, works for me... one less proble= m :) On Mon, Jan 27, 2014 at 1:06 AM, Miguel Clara <miguelmclara@gmail.com> wrot= e: > Its an HP Pavillion and digging more into it its indeed on of this > "Hybrid Graphichs" latops, so pretty sure it shares the same outputs, > at least for the LCD, (not sure about VGA and HDMI but I would say its > also the same). > > I couldn't attach the log at that time because the latpop was stuck on > that screen, all I can do is PowerOff, I even tried SSH, but no joy. > > I'm actually running X with MATE now fine but using only the Intel > graphics, only thing I notice is that with KMS I can't change > brightness, but I guess its not yet implemented... > > pciconf -lv output for both: > > [miguelc@hpbsd]~% pciconf -lv | egrep 'Graphics|Radeon' -B2 -A2 > vgapci1@pci0:0:2:0: class=3D0x030000 card=3D0x1657103c chip=3D0x011680= 86 > rev=3D0x09 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '2nd Generation Core Processor Family Integrated > Graphics Controller' > class =3D display > subclass =3D VGA > -- > vgapci0@pci0:1:0:0: class=3D0x030000 card=3D0x1657103c chip=3D0x674010= 02 > rev=3D0x00 hdr=3D0x00 > vendor =3D 'Advanced Micro Devices [AMD] nee ATI' > device =3D 'Whistler XT [AMD Radeon HD 6700M Series]' > class =3D display > subclass =3D VGA > > > I also tried to manual kldunload i915kms and then kldload readonkms and g= ot: > Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon_atrm_get_bios: =3D=3D=3D= > Try ATRM... > Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon_atrm_get_bios: > pci_find_class() found: 0:0:2:0, vendor=3D8086, device=3D0116 > Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon_atrm_get_bios: Get > ACPI device handle > Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon_atrm_get_bios: Get > ACPI handle for "ATRM" > Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon_atrm_get_bios: Call > radeon_atrm_call() > Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon: 1024M of VRAM memory re= ady > Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon: 512M of GTT memory read= y. > Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon: irq initialized. > Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon_device_init: Taking > over the fictitious range 0xa0000000-0xb0000000 > Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon: power management initia= lized > Jan 26 00:43:33 hpbsd kernel: info: [drm] Initialized radeon 2.29.0 20080= 528 > Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon_atrm_get_bios: =3D=3D=3D= > Try ATRM... > Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon_atrm_get_bios: > pci_find_class() found: 0:0:2:0, vendor=3D8086, device=3D0116 > Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon_atrm_get_bios: Get > ACPI device handle > Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon_atrm_get_bios: Get > ACPI handle for "ATRM" > Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon_atrm_get_bios: Call > radeon_atrm_call() > Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon: 1024M of VRAM memory re= ady > Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon: 512M of GTT memory read= y. > Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon: irq initialized. > Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon_device_init: Taking > over the fictitious range 0xa0000000-0xb0000000 > Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon: power management initia= lized > Jan 26 00:46:29 hpbsd kernel: info: [drm] Initialized radeon 2.29.0 20080= 528 > > > So it seems to work! > > But when I tried starx (without the intel dirver and just the ATI card > - see xorg.conf attached files) I got an erro - segmentation fault, > see Xorgradeonkmserro.log > > Any other usefull info, as long as I can grab it, I'll be glad to > attach, hoping this helps add +1 card to the supported ones! > > > btw the brightness problem also happens in a Acer laptop running > FreeBSD 10 with just the Intel driver! > > Thanks > > On Sun, Jan 26, 2014 at 11:21 PM, Jean-S=E9bastien P=E9dron > <dumbbell@freebsd.org> wrote: >> On 26.01.2014 01:17, Mike C. wrote: >>> Just changed and booted again, tried the kldload and got a similar >>> screen freezer. >>> >>> I'll have to attach a screenshot again. >> >> Kernel messages are logged in /var/log/messages by default. Could you >> please post this log file, after removing any informations you don't >> want to share? >> >>> I should also mention this is a laptop with an ati card but it also has >>> Intel integrated graphics (i7 processor). >>> Maybe this is what causes he issue? >> >> Hmmm, do you know if those two cards share a single set of output >> connectors? The technology is called "AMD PowerXpress" (something >> similar to NVIDIA Optimus). >> >> What's the maker and model of your laptop? >> >> -- >> Jean-S=E9bastien P=E9dron >>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CADGo8CXecqTPnhzVMH=W%2BkXH%2BMcbPZqw-Jamjkc3p8beoxLM5A>