Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 23 Jul 2013 06:47:48 -0700
From:      Adrian Chadd <adrian@freebsd.org>
To:        "Sam Fourman Jr." <sfourman@gmail.com>
Cc:        FreeBSD Current <freebsd-current@freebsd.org>
Subject:   Re: Network card issues ifconfig down ifconfig up required
Message-ID:  <CAJ-Vmo=Gh3TfkU6_rEdU_GB5pSVazO6BY5KpwJOdGWdF%2B_8Qbg@mail.gmail.com>
In-Reply-To: <CAOFF%2BZ0L0M0dBynaYVprms4MiE7fd9uhwmkjvjVGs7A%2BBjKOug@mail.gmail.com>
References:  <CAOFF%2BZ0L0M0dBynaYVprms4MiE7fd9uhwmkjvjVGs7A%2BBjKOug@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
The ethernet, or wifi, or both?



-adrian

On 23 July 2013 00:26, Sam Fourman Jr. <sfourman@gmail.com> wrote:
> Hello list,
>
> I decided to use a Old Asus Motherboard, for a Router / Firewall
> I decided to use -HEAD to get the latest WIFI support...
>
> I seem to have to ifconfig down and ifconfig up the interfaces before they
> become active... is there any way to fix this?
>
> I have a full dmesg, pciconf -lcbv, kenv | grep smbios, as well as a
> ifconfig below
>
>
> root@Border:~ # dmesg
> Copyright (c) 1992-2013 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 10.0-CURRENT #2 r253560: Tue Jul 23 04:49:04 UTC 2013
>     root@Border:/usr/obj/usr/src/sys/BORDER amd64
> FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
> WARNING: WITNESS option enabled, expect reduced performance.
> CPU: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz (2400.03-MHz K8-class
> CPU)
>   Origin = "GenuineIntel"  Id = 0x6f7  Family = 0x6  Model = 0xf  Stepping
> = 7
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
>   AMD Features=0x20100800<SYSCALL,NX,LM>
>   AMD Features2=0x1<LAHF>
>   TSC: P-state invariant, performance statistics
> real memory  = 8589934592 (8192 MB)
> avail memory = 7968894976 (7599 MB)
> Event timer "LAPIC" quality 400
> ACPI APIC Table: <Nvidia ASUSACPI>
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> FreeBSD/SMP: 1 package(s) x 4 core(s)
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
>  cpu2 (AP): APIC ID:  2
>  cpu3 (AP): APIC ID:  3
> ioapic0: Changing APIC ID to 4
> ioapic0 <Version 1.1> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <Nvidia ASUSACPI> on motherboard
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, cfdf0000 (3) failed
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> attimer0: <AT timer> port 0x40-0x43 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff irq 0,8 on
> acpi0
> Timecounter "HPET" frequency 25000000 Hz quality 950
> atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
> Event timer "RTC" frequency 32768 Hz quality 0
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <memory, RAM> at device 0.1 (no driver attached)
> pci0: <memory, RAM> at device 0.2 (no driver attached)
> pci0: <memory, RAM> at device 0.3 (no driver attached)
> pci0: <memory, RAM> at device 0.4 (no driver attached)
> pci0: <memory, RAM> at device 0.5 (no driver attached)
> pci0: <memory, RAM> at device 0.6 (no driver attached)
> pci0: <memory, RAM> at device 0.7 (no driver attached)
> pci0: <memory, RAM> at device 1.0 (no driver attached)
> pci0: <memory, RAM> at device 1.1 (no driver attached)
> pci0: <memory, RAM> at device 1.2 (no driver attached)
> pci0: <memory, RAM> at device 1.3 (no driver attached)
> pci0: <memory, RAM> at device 1.4 (no driver attached)
> pci0: <memory, RAM> at device 1.5 (no driver attached)
> pci0: <memory, RAM> at device 1.6 (no driver attached)
> pci0: <memory, RAM> at device 2.0 (no driver attached)
> pci0: <memory, RAM> at device 2.1 (no driver attached)
> pci0: <memory, RAM> at device 2.2 (no driver attached)
> pci0: <memory, RAM> at device 9.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 10.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
> ohci0: <nVidia nForce MCP55 USB Controller> mem 0xeffff000-0xefffffff irq
> 21 at device 11.0 on pci0
> usbus0 on ohci0
> ehci0: <NVIDIA nForce MCP55 USB 2.0 controller> mem 0xefffe000-0xefffe0ff
> irq 22 at device 11.1 on pci0
> usbus1: EHCI version 1.0
> usbus1 on ehci0
> atapci0: <nVidia nForce MCP55 UDMA133 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 13.0 on pci0
> ata0: <ATA channel> at channel 0 on atapci0
> ata1: <ATA channel> at channel 1 on atapci0
> atapci1: <nVidia nForce MCP55 SATA300 controller> port
> 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf700-0xf70f mem
> 0xefffd000-0xefffdfff irq 23 at device 14.0 on pci0
> ata2: <ATA channel> at channel 0 on atapci1
> ata3: <ATA channel> at channel 1 on atapci1
> atapci2: <nVidia nForce MCP55 SATA300 controller> port
> 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf200-0xf20f mem
> 0xefffc000-0xefffcfff irq 20 at device 14.1 on pci0
> ata4: <ATA channel> at channel 0 on atapci2
> ata5: <ATA channel> at channel 1 on atapci2
> atapci3: <nVidia nForce MCP55 SATA300 controller> port
> 0xf100-0xf107,0xf000-0xf003,0xef00-0xef07,0xee00-0xee03,0xed00-0xed0f mem
> 0xefffb000-0xefffbfff irq 21 at device 14.2 on pci0
> ata6: <ATA channel> at channel 0 on atapci3
> ata7: <ATA channel> at channel 1 on atapci3
> pcib1: <ACPI PCI-PCI bridge> at device 15.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port
> 0xdc00-0xdcff mem 0xefdff000-0xefdff0ff irq 16 at device 6.0 on pci1
> re0: Chip rev. 0x10000000
> re0: MAC rev. 0x00000000
> miibus0: <MII bus> on re0
> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
> rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
> 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
> 1000baseT-FDX-flow-master, auto, auto-flow
> re0: Ethernet address: 00:14:d1:25:d8:23
> re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port
> 0xd800-0xd8ff mem 0xefdfe000-0xefdfe0ff irq 17 at device 7.0 on pci1
> re1: Chip rev. 0x10000000
> re1: MAC rev. 0x00000000
> miibus1: <MII bus> on re1
> rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
> rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
> 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
> 1000baseT-FDX-flow-master, auto, auto-flow
> re1: Ethernet address: 00:14:d1:25:d8:44
> pci1: <serial bus, FireWire> at device 11.0 (no driver attached)
> nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xec00-0xec07 mem
> 0xefffa000-0xefffafff,0xefff9000-0xefff90ff,0xefff8000-0xefff800f irq 22 at
> device 17.0 on pci0
> miibus2: <MII bus> on nfe0
> e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 19 on miibus2
> e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto,
> auto-flow
> nfe0: Ethernet address: 00:1a:92:46:e0:44
> nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xeb00-0xeb07 mem
> 0xefff7000-0xefff7fff,0xefff6000-0xefff60ff,0xefff5000-0xefff500f irq 23 at
> device 18.0 on pci0
> miibus3: <MII bus> on nfe1
> e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus3
> e1000phy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto,
> auto-flow
> nfe1: Ethernet address: 00:1a:92:46:ed:f7
> pcib2: <ACPI PCI-PCI bridge> at device 19.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> vgapci0: <VGA-compatible display> mem
> 0xec000000-0xecffffff,0xd0000000-0xdfffffff,0xed000000-0xedffffff irq 16 at
> device 0.0 on pci2
> pcib3: <ACPI PCI-PCI bridge> at device 22.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> siis0: <SiI3132 SATA controller> port 0xbc00-0xbc7f mem
> 0xefcff000-0xefcff07f,0xefcf8000-0xefcfbfff irq 16 at device 0.0 on pci3
> siisch0: <SIIS channel> at channel 0 on siis0
> siisch1: <SIIS channel> at channel 1 on siis0
> pcib4: <ACPI PCI-PCI bridge> at device 23.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> ath0: <Atheros AR938x> mem 0xefac0000-0xefadffff irq 16 at device 0.0 on
> pci4
> ar9300_set_stub_functions: setting stub functions
> ar9300_set_stub_functions: setting stub functions
> ar9300_attach: calling ar9300_hw_attach
> ar9300_hw_attach: calling ar9300_eeprom_attach
> ar9300_flash_map: unimplemented for now
> Restoring Cal data from DRAM
> Restoring Cal data from EEPROM
> ar9300_hw_attach: ar9300_eeprom_attach returned 0
> ath0: RX status length: 48
> ath0: RX buffer size: 4096
> ath0: TX descriptor length: 128
> ath0: TX status length: 36
> ath0: TX buffers per descriptor: 4
> ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
> ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
> ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
> ath0: [HT] enabling HT modes
> ath0: [HT] enabling short-GI in 20MHz mode
> ath0: [HT] 1 stream STBC receive enabled
> ath0: [HT] 1 stream STBC transmit enabled
> ath0: [HT] 3 RX streams; 3 TX streams
> ath0: AR9380 mac 448.3 RF5110 phy 0.0
> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
> acpi_tz0: <Thermal Zone> on acpi0
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> ppc0: cannot reserve I/O port range
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 924092406000924
> device_attach: est0 attach returned 6
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 924092406000924
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 924092406000924
> device_attach: est2 attach returned 6
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 924092406000924
> device_attach: est3 attach returned 6
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> Timecounters tick every 1.000 msec
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 480Mbps High Speed USB v2.0
> ugen1.1: <nVidia> at usbus1
> uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
> ugen0.1: <nVidia> at usbus0
> uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> uhub1: 10 ports with 10 removable, self powered
> uhub0: 10 ports with 10 removable, self powered
> ada0 at ata2 bus 0 scbus2 target 0 lun 0
> ada0: <MDT MD400JD-00LSA0 06.01D06> ATA-7 SATA 1.x device
> ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
> ada0: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad4
> ada1 at ata3 bus 0 scbus3 target 0 lun 0
> ada1: <MDT MD400JD-00MSA1 10.01E01> ATA-7 SATA 1.x device
> ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
> ada1: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
> ada1: Previously was known as ad6
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #3 Launched!
> Timecounter "TSC-low" frequency 1200012795 Hz quality 1000
> WARNING: WITNESS option enabled, expect reduced performance.
> Root mount waiting for: usbus1
> Trying to mount root from zfs:Puffy []...
> ugen0.2: <vendor 0x04d9> at usbus0
> ukbd0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 2> on
> usbus0
> kbd2 at ukbd0
> ar9300_Stub_GetCTSTimeout: called
> ar9300_Stub_GetCTSTimeout: called
> ar9300_Stub_GetAntennaSwitch: called
> ar9300_Stub_GetAntennaSwitch: called
> wlan0: Ethernet address: 7c:c3:a1:b3:fc:af
> uhid0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 2> on
> usbus0
> re0: link state changed to DOWN
> re0: link state changed to UP
> nfe1: link state changed to DOWN
> nfe1: link state changed to UP
>
>
>
> root@Border:~ # pciconf -lcbv
> hostb0@pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x03a110de rev=0xa2
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Host Bridge'
>     class      = bridge
>     subclass   = HOST-PCI
>     cap 08[40] = HT host
> none0@pci0:0:0:1: class=0x050000 card=0x00000000 chip=0x03ac10de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none1@pci0:0:0:2: class=0x050000 card=0x00000000 chip=0x03aa10de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none2@pci0:0:0:3: class=0x050000 card=0x00000000 chip=0x03a910de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none3@pci0:0:0:4: class=0x050000 card=0x00000000 chip=0x03ab10de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none4@pci0:0:0:5: class=0x050000 card=0x00000000 chip=0x03a810de rev=0xa2
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none5@pci0:0:0:6: class=0x050000 card=0x00000000 chip=0x03b510de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none6@pci0:0:0:7: class=0x050000 card=0x00000000 chip=0x03b410de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none7@pci0:0:1:0: class=0x050000 card=0x00000000 chip=0x03ad10de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none8@pci0:0:1:1: class=0x050000 card=0x00000000 chip=0x03ae10de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none9@pci0:0:1:2: class=0x050000 card=0x00000000 chip=0x03af10de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none10@pci0:0:1:3: class=0x050000 card=0x00000000 chip=0x03b010de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none11@pci0:0:1:4: class=0x050000 card=0x00000000 chip=0x03b110de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none12@pci0:0:1:5: class=0x050000 card=0x00000000 chip=0x03b210de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none13@pci0:0:1:6: class=0x050000 card=0x00000000 chip=0x03b310de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none14@pci0:0:2:0: class=0x050000 card=0x00000000 chip=0x03b610de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none15@pci0:0:2:1: class=0x050000 card=0x00000000 chip=0x03bc10de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none16@pci0:0:2:2: class=0x050000 card=0x00000000 chip=0x03ba10de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'C55 Memory Controller'
>     class      = memory
>     subclass   = RAM
> none17@pci0:0:9:0: class=0x050000 card=0xcb841043 chip=0x036910de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 Memory Controller'
>     class      = memory
>     subclass   = RAM
>     cap 08[44] = HT slave
>     cap 00[e0] = unknown
> isab0@pci0:0:10:0: class=0x060100 card=0xcb841043 chip=0x036010de rev=0xa2
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 LPC Bridge'
>     class      = bridge
>     subclass   = PCI-ISA
> none18@pci0:0:10:1: class=0x0c0500 card=0xcb841043 chip=0x036810de rev=0xa2
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 SMBus'
>     class      = serial bus
>     subclass   = SMBus
>     bar   [10] = type I/O Port, range 32, base 0xff00, size 64, enabled
>     bar   [20] = type I/O Port, range 32, base 0x1c00, size 64, enabled
>     bar   [24] = type I/O Port, range 32, base 0x1c80, size 64, enabled
>     cap 01[44] = powerspec 2  supports D0 D3  current D0
> ohci0@pci0:0:11:0: class=0x0c0310 card=0xcb841043 chip=0x036c10de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 USB Controller'
>     class      = serial bus
>     subclass   = USB
>     bar   [10] = type Memory, range 32, base 0xeffff000, size 4096, enabled
>     cap 01[44] = powerspec 2  supports D0 D1 D2 D3  current D0
> ehci0@pci0:0:11:1: class=0x0c0320 card=0xcb841043 chip=0x036d10de rev=0xa2
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 USB Controller'
>     class      = serial bus
>     subclass   = USB
>     bar   [10] = type Memory, range 32, base 0xefffe000, size 256, enabled
>     cap 0a[44] = EHCI Debug Port at offset 0x98 in map 0x14
>     cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
> atapci0@pci0:0:13:0: class=0x01018a card=0xcb841043 chip=0x036e10de
> rev=0xa1 hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 IDE'
>     class      = mass storage
>     subclass   = ATA
>     bar   [20] = type I/O Port, range 32, base 0xfc00, size 16, enabled
>     cap 01[44] = powerspec 2  supports D0 D3  current D0
> atapci1@pci0:0:14:0: class=0x010185 card=0xcb841043 chip=0x037f10de
> rev=0xa2 hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 SATA Controller'
>     class      = mass storage
>     subclass   = ATA
>     bar   [10] = type I/O Port, range 32, base 0x9f0, size 8, enabled
>     bar   [14] = type I/O Port, range 32, base 0xbf0, size 4, enabled
>     bar   [18] = type I/O Port, range 32, base 0x970, size 8, enabled
>     bar   [1c] = type I/O Port, range 32, base 0xb70, size 4, enabled
>     bar   [20] = type I/O Port, range 32, base 0xf700, size 16, enabled
>     bar   [24] = type Memory, range 32, base 0xefffd000, size 4096, enabled
>     cap 01[44] = powerspec 2  supports D0 D3  current D0
>     cap 05[b0] = MSI supports 4 messages, 64 bit
>     cap 08[cc] = HT MSI fixed address window disabled at 0xfee00000
> atapci2@pci0:0:14:1: class=0x010185 card=0xcb841043 chip=0x037f10de
> rev=0xa2 hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 SATA Controller'
>     class      = mass storage
>     subclass   = ATA
>     bar   [10] = type I/O Port, range 32, base 0x9e0, size 8, enabled
>     bar   [14] = type I/O Port, range 32, base 0xbe0, size 4, enabled
>     bar   [18] = type I/O Port, range 32, base 0x960, size 8, enabled
>     bar   [1c] = type I/O Port, range 32, base 0xb60, size 4, enabled
>     bar   [20] = type I/O Port, range 32, base 0xf200, size 16, enabled
>     bar   [24] = type Memory, range 32, base 0xefffc000, size 4096, enabled
>     cap 01[44] = powerspec 2  supports D0 D3  current D0
>     cap 05[b0] = MSI supports 4 messages, 64 bit
>     cap 08[cc] = HT MSI fixed address window disabled at 0xfee00000
> atapci3@pci0:0:14:2: class=0x010185 card=0xcb841043 chip=0x037f10de
> rev=0xa2 hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 SATA Controller'
>     class      = mass storage
>     subclass   = ATA
>     bar   [10] = type I/O Port, range 32, base 0xf100, size 8, enabled
>     bar   [14] = type I/O Port, range 32, base 0xf000, size 4, enabled
>     bar   [18] = type I/O Port, range 32, base 0xef00, size 8, enabled
>     bar   [1c] = type I/O Port, range 32, base 0xee00, size 4, enabled
>     bar   [20] = type I/O Port, range 32, base 0xed00, size 16, enabled
>     bar   [24] = type Memory, range 32, base 0xefffb000, size 4096, enabled
>     cap 01[44] = powerspec 2  supports D0 D3  current D0
>     cap 05[b0] = MSI supports 4 messages, 64 bit
>     cap 08[cc] = HT MSI fixed address window disabled at 0xfee00000
> pcib1@pci0:0:15:0: class=0x060401 card=0xcb8410de chip=0x037010de rev=0xa2
> hdr=0x01
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 PCI bridge'
>     class      = bridge
>     subclass   = PCI-PCI
>     cap 0d[b8] = PCI Bridge card=0xcb8410de
>     cap 08[8c] = HT MSI address window disabled at 0xfee00000
> nfe0@pci0:0:17:0: class=0x068000 card=0xcb841043 chip=0x037310de rev=0xa2
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 Ethernet'
>     class      = bridge
>     bar   [10] = type Memory, range 32, base 0xefffa000, size 4096, enabled
>     bar   [14] = type I/O Port, range 32, base 0xec00, size 8, enabled
>     bar   [18] = type Memory, range 32, base 0xefff9000, size 256, enabled
>     bar   [1c] = type Memory, range 32, base 0xefff8000, size 16, enabled
>     cap 01[44] = powerspec 2  supports D0 D1 D2 D3  current D0
>     cap 11[70] = MSI-X supports 8 messages, enabled
>                  Table in map 0x18[0x0], PBA in map 0x1c[0x0]
>     cap 05[50] = MSI supports 8 messages, 64 bit, vector masks
>     cap 08[6c] = HT MSI fixed address window enabled at 0xfee00000
> nfe1@pci0:0:18:0: class=0x068000 card=0xcb841043 chip=0x037310de rev=0xa2
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 Ethernet'
>     class      = bridge
>     bar   [10] = type Memory, range 32, base 0xefff7000, size 4096, enabled
>     bar   [14] = type I/O Port, range 32, base 0xeb00, size 8, enabled
>     bar   [18] = type Memory, range 32, base 0xefff6000, size 256, enabled
>     bar   [1c] = type Memory, range 32, base 0xefff5000, size 16, enabled
>     cap 01[44] = powerspec 2  supports D0 D1 D2 D3  current D0
>     cap 11[70] = MSI-X supports 8 messages, enabled
>                  Table in map 0x18[0x0], PBA in map 0x1c[0x0]
>     cap 05[50] = MSI supports 8 messages, 64 bit, vector masks
>     cap 08[6c] = HT MSI fixed address window enabled at 0xfee00000
> pcib2@pci0:0:19:0: class=0x060400 card=0x000010de chip=0x037610de rev=0xa2
> hdr=0x01
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 PCI Express bridge'
>     class      = bridge
>     subclass   = PCI-PCI
>     cap 0d[40] = PCI Bridge card=0x000010de
>     cap 01[48] = powerspec 2  supports D0 D3  current D0
>     cap 05[50] = MSI supports 2 messages, 64 bit
>     cap 08[60] = HT MSI address window disabled at 0xfee00000
>     cap 10[80] = PCI-Express 1 root port slot max data 128(256) link x8(x8)
>                  speed 2.5(2.5) ASPM disabled(L0s/L1)
>     ecap 0002[100] = VC 1 max VC0
> pcib3@pci0:0:22:0: class=0x060400 card=0x000010de chip=0x037810de rev=0xa2
> hdr=0x01
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 PCI Express bridge'
>     class      = bridge
>     subclass   = PCI-PCI
>     cap 0d[40] = PCI Bridge card=0x000010de
>     cap 01[48] = powerspec 2  supports D0 D3  current D0
>     cap 05[50] = MSI supports 2 messages, 64 bit
>     cap 08[60] = HT MSI address window disabled at 0xfee00000
>     cap 10[80] = PCI-Express 1 root port slot max data 256(256) link x1(x1)
>                  speed 2.5(2.5) ASPM disabled(L0s/L1)
>     ecap 0002[100] = VC 1 max VC0
> pcib4@pci0:0:23:0: class=0x060400 card=0x000010de chip=0x037510de rev=0xa2
> hdr=0x01
>     vendor     = 'NVIDIA Corporation'
>     device     = 'MCP55 PCI Express bridge'
>     class      = bridge
>     subclass   = PCI-PCI
>     cap 0d[40] = PCI Bridge card=0x000010de
>     cap 01[48] = powerspec 2  supports D0 D3  current D0
>     cap 05[50] = MSI supports 2 messages, 64 bit
>     cap 08[60] = HT MSI address window disabled at 0xfee00000
>     cap 10[80] = PCI-Express 1 root port slot max data 128(256) link x1(x1)
>                  speed 2.5(2.5) ASPM disabled(L0s/L1)
>     ecap 0002[100] = VC 1 max VC0
> re0@pci0:1:6:0: class=0x020000 card=0x816910ec chip=0x816910ec rev=0x10
> hdr=0x00
>     vendor     = 'Realtek Semiconductor Co., Ltd.'
>     device     = 'RTL8169 PCI Gigabit Ethernet Controller'
>     class      = network
>     subclass   = ethernet
>     bar   [10] = type I/O Port, range 32, base 0xdc00, size 256, enabled
>     bar   [14] = type Memory, range 32, base 0xefdff000, size 256, enabled
>     cap 01[dc] = powerspec 2  supports D0 D1 D2 D3  current D0
> re1@pci0:1:7:0: class=0x020000 card=0x816910ec chip=0x816910ec rev=0x10
> hdr=0x00
>     vendor     = 'Realtek Semiconductor Co., Ltd.'
>     device     = 'RTL8169 PCI Gigabit Ethernet Controller'
>     class      = network
>     subclass   = ethernet
>     bar   [10] = type I/O Port, range 32, base 0xd800, size 256, enabled
>     bar   [14] = type Memory, range 32, base 0xefdfe000, size 256, enabled
>     cap 01[dc] = powerspec 2  supports D0 D1 D2 D3  current D0
> none19@pci0:1:11:0: class=0x0c0010 card=0x81fe1043 chip=0x30441106 rev=0xc0
> hdr=0x00
>     vendor     = 'VIA Technologies, Inc.'
>     device     = 'VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller'
>     class      = serial bus
>     subclass   = FireWire
>     bar   [10] = type Memory, range 32, base 0xefdfd000, size 2048, enabled
>     bar   [14] = type I/O Port, range 32, base 0xd400, size 128, enabled
>     cap 01[50] = powerspec 2  supports D0 D2 D3  current D0
> vgapci0@pci0:2:0:0: class=0x030000 card=0x99101462 chip=0x016110de rev=0xa1
> hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'NV44 [GeForce 6200 TurboCache(TM)]'
>     class      = display
>     subclass   = VGA
>     bar   [10] = type Memory, range 32, base 0xec000000, size 16777216,
> enabled
>     bar   [14] = type Prefetchable Memory, range 64, base 0xd0000000, size
> 268435456, enabled
>     bar   [1c] = type Memory, range 64, base 0xed000000, size 16777216,
> enabled
>     cap 01[60] = powerspec 2  supports D0 D3  current D0
>     cap 05[68] = MSI supports 1 message, 64 bit
>     cap 10[78] = PCI-Express 1 endpoint max data 128(128) link x8(x16)
>                  speed 2.5(2.5) ASPM disabled(L0s/L1)
>     ecap 0002[100] = VC 1 max VC0
>     ecap 0004[128] = Power Budgeting 1
> siis0@pci0:3:0:0: class=0x018000 card=0x819f1043 chip=0x31321095 rev=0x01
> hdr=0x00
>     vendor     = 'Silicon Image, Inc.'
>     device     = 'SiI 3132 Serial ATA Raid II Controller'
>     class      = mass storage
>     bar   [10] = type Memory, range 64, base 0xefcff000, size 128, enabled
>     bar   [18] = type Memory, range 64, base 0xefcf8000, size 16384, enabled
>     bar   [20] = type I/O Port, range 32, base 0xbc00, size 128, enabled
>     cap 01[54] = powerspec 2  supports D0 D1 D2 D3  current D0
>     cap 05[5c] = MSI supports 1 message, 64 bit
>     cap 10[70] = PCI-Express 1 legacy endpoint max data 256(1024) link
> x1(x1)
>                  speed 2.5(2.5) ASPM disabled(L0s)
>     ecap 0001[100] = AER 1 0 fatal 1 non-fatal 0 corrected
> ath0@pci0:4:0:0: class=0x028000 card=0x009a106b chip=0x0030168c rev=0x01
> hdr=0x00
>     vendor     = 'Atheros Communications Inc.'
>     device     = 'AR9300 Wireless LAN adaptor'
>     class      = network
>     bar   [10] = type Memory, range 64, base 0xefac0000, size 131072,
> enabled
>     cap 01[40] = powerspec 2  supports D0 D1 D2 D3  current D0
>     cap 05[50] = MSI supports 4 messages, 64 bit, vector masks
>     cap 10[70] = PCI-Express 2 endpoint max data 128(128) link x1(x1)
>                  speed 2.5(2.5) ASPM disabled(L0s/L1)
>     ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
>     ecap 0002[140] = VC 1 max VC0
>     ecap 0003[300] = Serial 1 0000000000000000
> root@Border:~ #
>
>
>
> root@Border:~ # kenv | grep smbios
> smbios.bios.reldate="04/28/2009"
> smbios.bios.vendor="Phoenix Technologies, LTD"
> smbios.bios.version="ASUS StrikerExtreme ACPI BIOS Revision 1901"
> smbios.chassis.maker="Chassis Manufacture"
> smbios.chassis.serial="EVAL          "
> smbios.chassis.tag="123456789000"
> smbios.chassis.version="Chassis Version"
> smbios.memory.enabled="8388608"
> smbios.planar.maker="ASUSTeK Computer INC."
> smbios.planar.product="StrikerExtreme"
> smbios.planar.serial="123456789000"
> smbios.planar.version="1.XX    "
> smbios.socket.enabled="1"
> smbios.socket.populated="1"
> smbios.system.maker="System manufacturer"
> smbios.system.product="System Product Name"
> smbios.system.serial="System Serial Number"
> smbios.system.uuid="becbf4de-e6e7-53eb-eafa-1c0fc0145223"
> smbios.system.version="System Version"
> smbios.version="2.4"
> root@Border:~ #
>
>
> root@Border:~ # ifconfig
> re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
> ether 00:14:d1:25:d8:23
> inet 99.55.241.27 netmask 0xfffffc00 broadcast 99.55.243.255
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: Ethernet autoselect (100baseTX <full-duplex>)
> status: active
> re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
> ether 00:14:d1:25:d8:44
> inet 192.168.12.1 netmask 0xffffff00 broadcast 192.168.12.255
> inet6 fe80::214:d1ff:fe25:d844%re1 prefixlen 64 scopeid 0x2
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: Ethernet autoselect (1000baseT <full-duplex>)
> status: active
> nfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=c219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO,LINKSTATE>
> ether 00:1a:92:46:e0:44
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: Ethernet autoselect (none)
> status: no carrier
> nfe1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=c219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO,LINKSTATE>
> ether 00:1a:92:46:ed:f7
> inet 75.133.75.194 netmask 0xfffffff8 broadcast 75.133.75.199
> inet6 fe80::21a:92ff:fe46:edf7%nfe1 prefixlen 64 scopeid 0x4
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: Ethernet autoselect (1000baseT <full-duplex,master>)
> status: active
> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
> ether 7c:c3:a1:b3:fc:af
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>
> status: running
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
> options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
> inet6 ::1 prefixlen 128
> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
> inet 127.0.0.1 netmask 0xff000000
> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> ether 7c:c3:a1:b3:fc:af
> inet 192.168.13.1 netmask 0xffffff00 broadcast 192.168.13.255
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>
> status: running
> ssid BlackBox channel 6 (2437 MHz 11g ht/20) bssid 7c:c3:a1:b3:fc:af
> regdomain 100 indoor ecm authmode OPEN privacy OFF txpower 20
> scanvalid 60 protmode RTSCTS ampdulimit 64k ampdudensity 8 shortgi wme
> burst dtimperiod 15 -dfs bintval 1000
> pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152
> nd6 options=9<PERFORMNUD,IFDISABLED>
> root@Border:~ #
>
>
> --
>
> Sam Fourman Jr.
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmo=Gh3TfkU6_rEdU_GB5pSVazO6BY5KpwJOdGWdF%2B_8Qbg>