Date: Tue, 3 Mar 2015 12:35:24 +0800 From: Bin LIU <binliu.lqbn@gmail.com> To: David Somayajulu <david.somayajulu@qlogic.com> Cc: "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org>, "davidcs@freebsd.org" <davidcs@freebsd.org> Subject: Re: BCM57810 interface can't go up with NPAR enabled Message-ID: <CAPpP3%2B-BVFC0=iefaqae_NSt%2BcfaCNnUatfCxM55s-6LqSgZGw@mail.gmail.com> In-Reply-To: <49F5640B08EAA94DAF2F6B6145E6A08A01942B2569@AVMB1.qlogic.org> References: <CAPpP3%2B860S55-9jqbq-OF654nERdhS=2zqW=9Kj2X56wPA2uZQ@mail.gmail.com> <49F5640B08EAA94DAF2F6B6145E6A08A01942B2569@AVMB1.qlogic.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi David, Many thanks for your dedicated work. Could you please tell me if there is a roadmap or time schedule to support NPAR in the future, thanks! On Tue, Mar 3, 2015 at 2:45 AM, David Somayajulu < david.somayajulu@qlogic.com> wrote: > Hi Bin, > > Sorry for the delayed response. bxe driver currently does not support NPAR. > > -david S. > > > > *From:* Bin LIU [mailto:binliu.lqbn@gmail.com] > *Sent:* Thursday, February 26, 2015 9:45 PM > *To:* freebsd-questions@freebsd.org > *Cc:* davidcs@freebsd.org > *Subject:* BCM57810 interface can't go up with NPAR enabled > > > > Hi, > > > > I'm testing the Dell Broadcom Dual Port 10G interface card with NPAR > function enabled on 9-stable-r277476M, I can see all 8 interfaces(bxe0 to > bxe7), but only bxe0 and bxe1 are active, the other 6 status are all "no > carrier". > > > > dmesg reports the following: > > > > bxe3: WARNING: Interface link is down, ignoring transmit request > > bxe4: WARNING: Interface link is down, ignoring transmit request > > bxe5: WARNING: Interface link is down, ignoring transmit request > > bxe5: WARNING: Interface link is down, ignoring transmit request > > bxe3: WARNING: Interface link is down, ignoring transmit request > > bxe4: WARNING: Interface link is down, ignoring transmit request > > bxe5: WARNING: Interface link is down, ignoring transmit request > > bxe3: WARNING: Interface link is down, ignoring transmit request > > bxe4: WARNING: Interface link is down, ignoring transmit request > > bxe4: WARNING: Interface link is down, ignoring transmit request > > bxe5: WARNING: Interface link is down, ignoring transmit request > > bxe5: WARNING: Interface link is down, ignoring transmit request > > bxe3: WARNING: Interface link is down, ignoring transmit request > > bxe4: WARNING: Interface link is down, ignoring transmit request > > bxe5: WARNING: Interface link is down, ignoring transmit request > > bxe3: WARNING: Interface link is down, ignoring transmit request > > bxe4: WARNING: Interface link is down, ignoring transmit request > > bxe3: WARNING: Interface link is down, ignoring transmit request > > bxe5: WARNING: Interface link is down, ignoring transmit request > > bxe4: WARNING: Interface link is down, ignoring transmit request > > bxe5: WARNING: Interface link is down, ignoring transmit request > > bxe3: WARNING: Interface link is down, ignoring transmit request > > bxe4: WARNING: Interface link is down, ignoring transmit request > > bxe3: WARNING: Interface link is down, ignoring transmit request > > bxe5: WARNING: Interface link is down, ignoring transmit request > > bxe4: WARNING: Interface link is down, ignoring transmit request > > bxe5: WARNING: Interface link is down, ignoring transmit request > > bxe3: WARNING: Interface link is down, ignoring transmit request > > bxe5: WARNING: Interface link is down, ignoring transmit request > > bxe3: bxe4: WARNING: Interface link is down, ignoring transmit request > > WARNING: Interface link is down, ignoring transmit request > > bxe4: WARNING: Interface link is down, ignoring transmit request > > bxe3: WARNING: Interface link is down, ignoring transmit request > > bxe5: WARNING: Interface link is down, ignoring transmit request > > bxe4: WARNING: Interface link is down, ignoring transmit request > > > > And here is the device info: > > > > bxe0@pci0:3:0:0: class=0x020000 card=0x100814e4 chip=0x16ae14e4 > rev=0x10 hdr=0x00 > > vendor = 'Broadcom Corporation' > > device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function' > > class = network > > subclass = ethernet > > bxe1@pci0:3:0:1: class=0x020000 card=0x100814e4 chip=0x16ae14e4 > rev=0x10 hdr=0x00 > > vendor = 'Broadcom Corporation' > > device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function' > > class = network > > subclass = ethernet > > bxe2@pci0:3:0:2: class=0x020000 card=0x100814e4 chip=0x16ae14e4 > rev=0x10 hdr=0x00 > > vendor = 'Broadcom Corporation' > > device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function' > > class = network > > subclass = ethernet > > bxe3@pci0:3:0:3: class=0x020000 card=0x100814e4 chip=0x16ae14e4 > rev=0x10 hdr=0x00 > > vendor = 'Broadcom Corporation' > > device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function' > > class = network > > subclass = ethernet > > bxe4@pci0:3:0:4: class=0x020000 card=0x100814e4 chip=0x16ae14e4 > rev=0x10 hdr=0x00 > > vendor = 'Broadcom Corporation' > > device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function' > > class = network > > subclass = ethernet > > bxe5@pci0:3:0:5: class=0x020000 card=0x100814e4 chip=0x16ae14e4 > rev=0x10 hdr=0x00 > > vendor = 'Broadcom Corporation' > > device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function' > > class = network > > subclass = ethernet > > bxe6@pci0:3:0:6: class=0x020000 card=0x100814e4 chip=0x16ae14e4 > rev=0x10 hdr=0x00 > > vendor = 'Broadcom Corporation' > > device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function' > > class = network > > subclass = ethernet > > bxe7@pci0:3:0:7: class=0x020000 card=0x100814e4 chip=0x16ae14e4 > rev=0x10 hdr=0x00 > > vendor = 'Broadcom Corporation' > > device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function' > > class = network > > subclass = ethernet > > > > > > Many thanks if you can give me some suggestions, thanks you! > > > > > > ------------------------------ > > This message and any attached documents contain information from the > sending company or its parent company(s), subsidiaries, divisions or branch > offices that may be confidential. If you are not the intended recipient, > you may not read, copy, distribute, or use this information. If you have > received this transmission in error, please notify the sender immediately > by reply e-mail and then delete this message. >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAPpP3%2B-BVFC0=iefaqae_NSt%2BcfaCNnUatfCxM55s-6LqSgZGw>