Date: Thu, 7 Nov 2019 20:46:15 +0100 From: <driesm.michiels@gmail.com> To: "'Andriy Gapon'" <avg@FreeBSD.org>, "'Julian Elischer'" <julian@freebsd.org>, <freebsd-hackers@freebsd.org> Subject: RE: Getting jedec_dimm to work Message-ID: <001a01d595a4$047f3b80$0d7db280$@gmail.com> In-Reply-To: <000d01d5959b$963f54a0$c2bdfde0$@gmail.com> References: <002101d594d0$9b2a3280$d17e9780$@gmail.com> <30a5f191-46ef-48e2-5fb4-395a1f1bd370@FreeBSD.org> <9a6336d2-2ab2-a2ae-8258-91a3cbdd3e02@freebsd.org> <000501d59596$169e16f0$43da44d0$@gmail.com> <f05e7304-2043-eff4-a9ea-8619df81a4cd@FreeBSD.org> <000d01d5959b$963f54a0$c2bdfde0$@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> -----Original Message----- > From: driesm.michiels@gmail.com <driesm.michiels@gmail.com> > Sent: donderdag 7 november 2019 19:46 > To: 'Andriy Gapon' <avg@FreeBSD.org>; 'Julian Elischer' = <julian@freebsd.org>; > freebsd-hackers@freebsd.org > Subject: RE: Getting jedec_dimm to work >=20 > After loading the suggested driver and changing the > hint.jedec_dimm.*.at=3D"smbus0" to hint.jedec_dimm.*.at =3D"ichsmb0" Sorry for the noise, but never mind the change in hint.jedec_dimm*.at. = It was just a matter of loading the correct driver =3D). > Everything is working smooth. Thanks! A reboot was not even needed! >=20 > ichsmb0@pci0:0:31:4: class=3D0x0c0500 card=3D0x79981462 = chip=3D0xa1238086 > rev=3D0x31 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '100 Series/C230 Series Chipset Family SMBus' > class =3D serial bus > subclass =3D SMBus >=20 > I'll submit some minor extra's to the man page if that=E2=80=99s OK. > Detailing a bit more how to find the correct location of the dimms and = the > correct driver to load (with pciconf). >=20 > Regards & thanks again! > Dries >=20 > -----Original Message----- > > From: Andriy Gapon <avg@FreeBSD.org> > > Sent: donderdag 7 november 2019 19:16 > > To: driesm.michiels@gmail.com; 'Julian Elischer' = <julian@freebsd.org>; > > freebsd-hackers@freebsd.org > > Subject: Re: Getting jedec_dimm to work > > > > On 07/11/2019 20:06, driesm.michiels@gmail.com wrote: > > > Honestly, I kinda *assumed* it was a common interface used on = every > > motherboard. > > > This seems a *very* wrong assumption, as I just went through my > > > dmesg > > and I didn't see any smbus getting detected.. > > > I guess the driver won't work without one? Or is it possible to = get > > > the driver > > attached over another bus/interface that my system has? > > > > No, you do need an smbus. > > Check with pciconf -lv if you have any device without a driver that > > looks like it could be an SMBus controller. > > Maybe ichsmb driver will work for you (kldload ichsmb). > > > > -- > > Andriy Gapon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001a01d595a4$047f3b80$0d7db280$>