Date: Thu, 08 Feb 2001 14:48:34 -0500 From: Don Tyson <tyson@stanfordalumni.org> To: "Robert Daniels" <rdaniels38@home.com> Cc: freebsd-hardware@freebsd.org Subject: Re: D-Link DFE-530TX+ Message-ID: <200102081948.LAA16608@avocet.prod.itd.earthlink.net> In-Reply-To: <000e01c091d0$2b1363d0$43701518@cx628451a> References: <000e01c091d0$2b1363d0$43701518@cx628451a>
next in thread | previous in thread | raw e-mail | index | archive | help
> > Hello, I am running a Free BSD 4.0 CURRENT box. I am trying to install a = > D-Link DFE-530TX+ . I currently have a Linksys LNE100TX version 4.1 = > installed in the box and working fine. I have tried to compile a kernal = > with Rhine support but card still won't work. I get the following info = > when I do a dmesg. =20 > > pci0:(unknown card> (vendor =3D 0x1186, dev=3D0x1300) at 8.0 irq 10 = > "This is my D-Link Card" > dc0<ADMTEK AN985 10/100 BASE TX> PORT 0x6100-0x61FF mem 0xf040000 - = > 0xf04003ff IRQ11 at device 9.0 on pci 0 "Linksys card" > dc0: Ethernet Address:00:20:78:04:bf:df > mii bus0 : <MII bus 7 on DC0) > > Robert -- Not sure this will solve it, but I use that card with the following lines in my kernel enabled as indicated: # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device pcn # AMD Am79C79x PCI 10/100 NICs device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN and the relevant line in my dmesg is: rl0: <RealTek 8139 10/100BaseTX> port 0xd400-0xd4ff mem 0xda000000-0xda0000ff irq 9 at device 11.0 on pci0 Don Tyson > Any insight or help would be appreciated.=20 > > Thanks(in advance), > Robert Daniels > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hardware" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200102081948.LAA16608>