Date: Mon, 14 May 2001 10:03:04 +0200 From: Poul-Henning Kamp <phk@critter.freebsd.dk> To: "Rink Springer" <rink@springer.cx> Cc: overby@ntr.net, freebsd-hardware@FreeBSD.ORG Subject: Re: Problem with FreeBSD 4.3 on my Asus A7V-E board Message-ID: <17722.989827384@critter> In-Reply-To: Your message of "Mon, 14 May 2001 09:59:29 %2B0200." <001501c0dc4b$cf18a290$020010ac@aurum>
next in thread | previous in thread | raw e-mail | index | archive | help
Make sure the cable is not plugged the wrong way into your CD... In message <001501c0dc4b$cf18a290$020010ac@aurum>, "Rink Springer" writes: >Odd is, whenever I pull the IDE cable of the CD-RW drive loose, it works >like a charm! I haven't had these problems under Windows or anything! > >Does anyone know what's going on? > >--Rink > >----- Original Message ----- >From: <overby@ntr.net> >To: <rink@springer.cx> >Sent: Monday, May 14, 2001 12:16 AM >Subject: Re: Problem with FreeBSD 4.3 on my Asus A7V-E board > > >> > I've got a problem with FreeBSD 4.3 on my Asus A7V-E motherboard with an >> > Athlon 1.1GHz on it. FreeBSD seems to crash whenever it's about to probe >my >> > second CD drive. My setup is like this: >> >> > Primary IDE -> Maxtor 20GB harddisk, UDMA66 (with appropriate cable) >> > Secondary IDE -> Philips 40x CD-ROM (Master) and HP CD-Writer 9100e >(Slave). >> >> A have an Asus A7V133 + Athlon 900mhz. It locks up when it tries to probe >> my Sony 14E CD-RW. The driver issues an INQUIRY BIG command, the drive >> does not respond, the bus is reset and then FreeBSD hangs. That's a lot >like >> what you saw, allthough not identical. >> >> I haven't solved the problem yet. I tried dropping my CPU speed to >500mhz, >> but the board wouldn't come up at all when I did that. >> >> If you do find a solution, I'd like to hear about it! >> >> Glen Overby >> >> > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-hardware" in the body of the message > -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 phk@FreeBSD.ORG | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?17722.989827384>