Date: Sun, 27 Mar 2005 23:47:19 +0200 From: Mike Daemon <mike.daemon@gmail.com> To: Thomas Foster <tbonius@comcast.net> Cc: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Re: more problems with 5.3 and "TIMEOUT - WRITE_DMA" Message-ID: <3db6da6d05032713476ac966d4@mail.gmail.com> In-Reply-To: <006701c53314$834b7490$4300a8c0@home.lan> References: <3db6da6d05032713157dac8a14@mail.gmail.com> <006701c53314$834b7490$4300a8c0@home.lan>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 27 Mar 2005 13:32:43 -0800, Thomas Foster <tbonius@comcast.net> wro= te: > I had this same issue I=B4ll have seen some more posts on the list with about the same problem therefore, I hope some bright one will take alook at the code.. and post something smart.. I=B4m very much stuck, hopeing any new snapshot will work.. on an older AMD Nforce board. 5.2.1 seemed to install > and run.. but moving to 5.3 gave me issues. I tinkered with the DMA > settings in the BIOS.. to no avail. The Geometry seemed to be off on the > drive I noticed (IBM deskstar) when I newfs'd it.. so I changed out drive= s.. > but never got it working.. I eventually just dropped Gentoo on it. >=20 > What chipset, drive controller hard drive are you using on this system? http://www.freebsd.org/cgi/man.cgi?query=3Data&sektion=3D4&manpath=3DFreeBS= D+5.3-RELEASE I=B4ll notised that my idecontroller IS supported by the ata-driver, witch makes it even stranger.. (I think I will check on my cabling once more, even if it=B4s a newly installed _rounded_ 32 pin cable..) My atacontroller: SiS 5513 My HDD: Seagate 200 GB >=20 > T >=20 > ----- Original Message ----- > From: "Mike Daemon" <mike.daemon@gmail.com> > To: "FreeBSD Questions" <freebsd-questions@freebsd.org> > Sent: Sunday, March 27, 2005 1:15 PM > Subject: more problems with 5.3 and "TIMEOUT - WRITE_DMA" >=20 > I got this annoying problem when upgradeing to 5.3, the miniinst iso > blurps out "TIMEOUT - WRITE_DMA" when it starts writing base to my > disk. And when I tried to first install 5.2.1 and upgrade (cvsup, make > buildworld etc.. ) to 5.3 that way everything seems fine until I > reboot to single-user-mode, as soon as Im starting to write anything > to the disk it=B4s blurping out those errors.. I have diagnosticed my > disk, checked my cabling and fixed my PSU (installed a brand new one). > No difference. I noticed that my ide-controller was supported in 4.11, > but not? in 5.3, is that realy true? seems very strange... >=20 > Sence I duel boot with Wintendo/Lunix and don=B4t see this problem with > those oses I=B4m very confused of what to do next.. >=20 > I=B4ll tried some snapshots to but no luck... >=20 > / Mike >=20 > ps My dmesg goes in the attachment, in hope for a patch/solution to > this problem. ds >=20 > -------------------------------------------------------------------------= ------- >=20 > > _______________________________________________ > > freebsd-questions@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to > > "freebsd-questions-unsubscribe@freebsd.org" > > >=20 >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3db6da6d05032713476ac966d4>