Date: Fri, 16 Feb 2001 15:26:58 +0000 From: Darren Evans <darren@horseplay.demon.co.uk> To: questions@FreeBSD.ORG Subject: Re: Xircom CreditCard Ethernet 10/100 + Modem 56 Message-ID: <5.0.2.1.1.20010216152347.032d04d0@pop3.demon.co.uk> In-Reply-To: <01021116221500.80228@BB-62-5-7-230.bb.tninet.se> References: <5.0.0.25.1.20010211020757.04a70dd0@pop3.demon.co.uk> <5.0.0.25.1.20010211020757.04a70dd0@pop3.demon.co.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
Great the below works, now i'd like to configure the modem?
Need some help on this, I have tried symbolic links from
/dev/cuaa[0-3] to /dev/modem and firing up minicom to no
avail. The handbook does'nt say much on PCMCIA modems.
Darren
At 16:22 11/02/01 +0100, Mark Rowlands wrote:
>On Sunday 11 February 2001 03:13, Darren Evans wrote:
> > I'm doing a fresh FreeBSD 4.2 install.
> >
> > When booting up the GENERIC kernel it says
> >
> > Config id 35 not present in this card
> >
> > Resource allocation failure for "Xircom"("CreditCard Ethernet
> > 10/100 + Modem 56") [CEM56] [1.00]; Reason specified CIS was not found
> >
> > pccardd[52]: pccardd started
> >
> > Can someone walk me through this one, i've seen several posts on usenet
> > for this but no resolution.
>I only use the card for ethernet purposes...not sure if the modem bit works
>even.... but this is the entire contents of my pccardd.conf file. back up
>your /etc/default/pccardd.conf file and then try this one.
>
># Default PCCARD configuration file
>#
># Removing all IRQ conflicts from this file can't be done because of some
># IRQ-selfish PC-cards. So if you want to use some of these cards in
># your machine, you will be forced to modify their IRQ parameters from
># the following list.
>#
># IRQ == 0 means "allocate free IRQ from IRQ pool"
># IRQ == 16 means "do not use IRQ (e.g. PIO mode)"
>#
># $FreeBSD: src/etc/defaults/pccard.conf,v 1.98.2.12 2000/12/23 14:38:37
>sanpei Exp $
>#
># Send new entries for this file to imp@freebsd.org. He's volunteered
># to act as coordinator for this file.
>#
>
># Generally available IO ports
>io 0x240-0x360
># Generally available IRQs (Built-in sound-card owners remove 5)
>irq 3 5 10 11 15
># Available memory slots
>memory 0xd4000 96k
>
># Xircom CreditCard Ethernet 10/100 + modem (Ethernet part)
>card "Xircom" "CreditCard Ethernet 10/100 + Modem 56"
> config 0x27 "xe" ?
> insert /etc/pccard_ether $device start
> remove /etc/pccard_ether $device stop
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.0.2.1.1.20010216152347.032d04d0>