Date: Fri, 25 Mar 2011 09:11:49 -0400 From: Mike Tancsa <mike@sentex.net> To: Steven Hartland <killing@multiplay.co.uk> Cc: freebsd-stable@freebsd.org, Jeremy Chadwick <freebsd@jdc.parodius.com> Subject: Re: deadlock or bad disk ? RELENG_8 Message-ID: <4D8C9495.90103@sentex.net> In-Reply-To: <011E0838F0EC4E80885646C70B34F8AB@multiplay.co.uk> References: <201007182108.o6IL88eG043887@lava.sentex.ca><20100718211415.GA84127@icarus.home.lan><201007182142.o6ILgDQW044046@lava.sentex.ca><20100719023419.GA91006@icarus.home.lan><201007190301.o6J31Hs1045607@lava.sentex.ca><20100719033424.GA92607@icarus.home.lan><201007191237.o6JCbmj7049339@lava.sentex.ca> <20100719203320.GB21088@icarus.home.lan> <011E0838F0EC4E80885646C70B34F8AB@multiplay.co.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
On 3/25/2011 6:29 AM, Steven Hartland wrote: > ----- Original Message ----- From: "Jeremy Chadwick" > <freebsd@jdc.parodius.com> > > Was there any conclusion from this guys, was there a bad disk > causing the issue? You mean this old thread ? http://lists.freebsd.org/pipermail/freebsd-stable/2010-July/057874.html I would say probably the disk mostly. Perhaps a driver or firmware bug on the Areca. Hard to say. The drive totally failed a month or so later. Also, moved to a later firmware on the areaca controller after that and all has been quite stable on the box except for an odd em driver bug. However, version 7.2.2 fixed that. Here is the dmesg of the box right now. Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.2-PRERELEASE #0: Wed Feb 23 10:00:14 EST 2011 mdtancsa@backup3.sentex.ca:/usr/obj/usr/src/sys/backup amd64 module_register: module pci/em already exists! Module pci/em failed to register: 17 module_register: module pci/lem already exists! Module pci/lem failed to register: 17 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (3333.31-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x20652 Family = 6 Model = 25 Stepping = 2 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x298e3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AESNI> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 8589934592 (8192 MB) avail memory = 8186777600 (7807 MB) ACPI APIC Table: <INTEL S3420GPX> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 5 ioapic0 <Version 2.0> irqs 0-23 on motherboard lapic0: Forcing LINT1 to edge trigger kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-XTS> on motherboard acpi0: <INTEL S3420GPX> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 2.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci2 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4 pci5: <ACPI PCI bus> on pcib5 siis0: <SiI3124 SATA controller> port 0x3000-0x300f mem 0xb4408000-0xb440807f,0xb4400000-0xb4407fff irq 19 at device 0.0 on pci5 siis0: [ITHREAD] siisch0: <SIIS channel> at channel 0 on siis0 siisch0: [ITHREAD] siisch1: <SIIS channel> at channel 1 on siis0 siisch1: [ITHREAD] siisch2: <SIIS channel> at channel 2 on siis0 siisch2: [ITHREAD] siisch3: <SIIS channel> at channel 3 on siis0 siisch3: [ITHREAD] pcib6: <ACPI PCI-PCI bridge> at device 4.0 on pci2 pci6: <ACPI PCI bus> on pcib6 bge0: <HPQ 10/100/1000 Copper Based Gigabit Adapter, ASIC rev. 0x004001> mem 0xb4300000-0xb430ffff irq 16 at device 0.0 on pci6 bge0: CHIP ID 0x00004001; ASIC REV 0x04; CHIP REV 0x40; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:10:18:14:27:d5 bge0: [ITHREAD] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7 pci8: <ACPI PCI bus> on pcib8 arcmsr0: <Areca SATA Host Adapter RAID Controller > mem 0xb4200000-0xb4200fff irq 18 at device 14.0 on pci8 ARECA RAID ADAPTER0: Driver Version 1.20.00.19 2010-11-11 ARECA RAID ADAPTER0: FIRMWARE VERSION V1.44 2008-2-1 arcmsr0: [ITHREAD] pcib9: <ACPI PCI-PCI bridge> at device 0.2 on pci7 pci9: <ACPI PCI bus> on pcib9 em0: <Intel(R) PRO/1000 Network Connection 7.2.2> port 0x4040-0x405f mem 0xb4500000-0xb451ffff,0xb4525000-0xb4525fff irq 16 at device 25.0 on pci0 em0: Using an MSI interrupt em0: [FILTER] em0: Ethernet address: 00:15:17:ed:68:a5 ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xb4522000-0xb45223ff irq 21 at device 26.0 on pci0 ehci0: [ITHREAD] usbus0: EHCI version 1.0 usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0 pcib10: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci10: <ACPI PCI bus> on pcib10 pcib11: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci11: <ACPI PCI bus> on pcib11 em1: <Intel(R) PRO/1000 Network Connection 7.2.2> port 0x2000-0x201f mem 0xb4100000-0xb411ffff,0xb4120000-0xb4123fff irq 16 at device 0.0 on pci11 em1: Using MSIX interrupts with 3 vectors em1: [ITHREAD] em1: [ITHREAD] em1: [ITHREAD] em1: Ethernet address: 00:15:17:ed:68:a4 pcib12: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 pci12: <ACPI PCI bus> on pcib12 vgapci0: <VGA-compatible display> mem 0xb2000000-0xb2ffffff,0xb3800000-0xb3803fff,0xb3000000-0xb37fffff irq 17 at device 0.0 on pci12 pcib13: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 pci13: <ACPI PCI bus> on pcib13 3ware device driver for 9000 series storage controllers, version: 3.80.06.003 twa0: <3ware 9000 series Storage Controller> port 0x1000-0x10ff mem 0xb0000000-0xb1ffffff,0xb4000000-0xb4000fff irq 19 at device 0.0 on pci13 twa0: [ITHREAD] twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-2LP, 2 ports, Firmware FE9X 3.08.00.016, BIOS BE9X 3.08.00.004 ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xb4521000-0xb45213ff irq 23 at device 29.0 on pci0 ehci1: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1 pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci14: <ACPI PCI bus> on pcib14 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel 5 Series/3400 Series AHCI SATA controller> port 0x4068-0x406f,0x4074-0x4077,0x4060-0x4067,0x4070-0x4073,0x4020-0x403f mem 0xb4520000-0xb45207ff irq 18 at device 31.2 on pci0 ahci0: [ITHREAD] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich0: [ITHREAD] ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich1: [ITHREAD] ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich2: [ITHREAD] ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich3: [ITHREAD] ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich4: [ITHREAD] ahcich5: <AHCI channel> at channel 5 on ahci0 ahcich5: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Sleep Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: [FILTER] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb000-0xcffff,0xd0000-0xd1fff,0xd3800-0xd57ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd: unable to get the current command byte value. atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to get the current command byte value. device_attach: acpi_perf1 attach returned 6 device_attach: acpi_perf3 attach returned 6 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 coretemp0: Tj(target) value 105 does not seem right. est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 device_attach: acpi_perf1 attach returned 6 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 coretemp1: Tj(target) value 105 does not seem right. est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 19 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 coretemp2: Tj(target) value 105 does not seem right. est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 device_attach: acpi_perf3 attach returned 6 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 coretemp3: Tj(target) value 105 does not seem right. est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 19 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing.(noperiph:siisch0:0:-1:-1): rescan already queued usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 pmp0 at siisch0 bus 0 scbus0 target 15 lun 0 pmp0: <Port Multiplier 47261095 1f06> ATA-0 device pmp0: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes) pmp0: 5 fan-out ports uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087> at usbus0 uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 uhub2: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen0.3: <American Power Conversion> at usbus0 ugen1.3: <American Megatrends Inc.> at usbus1 ukbd1: <Keyboard Interface> on usbus1 kbd2 at ukbd1 ums0: <Mouse Interface> on usbus1 ums0: 3 buttons and [Z] coordinates ID=0 da0 at arcmsr0 bus 0 scbus4 target 0 lun 0 da0: <Areca usrvar R001> Fixed Direct Access SCSI-5 device da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) da0: Command Queueing enabled da0: 76293MB (156249600 512 byte sectors: 255H 63S/T 9726C) da1 at arcmsr0 bus 0 scbus4 target 0 lun 1 da1: <Areca backup1 R001> Fixed Direct Access SCSI-5 device da1: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) da1: Command Queueing enabled da1: 2784728MB (5703123456 512 byte sectors: 255H 63S/T 355003C) ada0 at siisch0 bus 0 scbus0 target 0 lun 0da2 at twa0 bus 0 scbus5 target 0 lun 0 da2: <AMCC 9650SE-2LP DISK 3.08> Fixed Direct Access SCSI-5 device da2: 100.000MB/s transfers da2: 66747MB (136697856 512 byte sectors: 255H 63S/T 8509C) ada0: <WDC WD2001FASS-00U0B0 01.00101> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada1 at siisch0 bus 0 scbus0 target 1 lun 0 ada1: <WDC WD2001FASS-00U0B0 01.00101> ATA-8 SATA 2.x device ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada2 at siisch0 bus 0 scbus0 target 2 lun 0 ada2: <WDC WD2001FASS-00U0B0 01.00101> ATA-8 SATA 2.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada3 at siisch0 bus 0 scbus0 target 3 lun 0 ada3: <WDC WD2001FASS-00U0B0 01.00101> ATA-8 SATA 2.x device ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada4 at ahcich0 bus 0 scbus6 target 0 lun 0 ada4: <ST31000333AS SD35> ATA-8 SATA 2.x device ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada5 at ahcich1 bus 0 scbus7 target 0 lun 0 ada5: <ST31000528AS CC35> ATA-8 SATA 2.x device ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada5: Command Queueing enabled ada5: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada6 at ahcich2 bus 0 scbus8 target 0 lun 0 ada6: <ST31000340AS SD1A> ATA-8 SATA 2.x device ada6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada6: Command Queueing enabled ada6: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada7 at ahcich5 bus 0 scbus11 target 0 lun 0 ada7: <WDC WD1002FAEX-00Z3A0 05.01D05> ATA-8 SATA 3.x device ada7: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada7: Command Queueing enabled ada7: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) pass7 at arcmsr0 bus 0 scbus4 target 16 lun 0 pass7: <Areca RAID controller R001> Fixed Processor SCSI-0 device lapic1: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! lapic5: Forcing LINT1 to edge trigger SMP: AP CPU #3 Launched! lapic4: Forcing LINT1 to edge trigger SMP: AP CPU #2 Launched! ugen1.4: <USB> at usbus1 ukbd0: <USB USB Keykoard, class 0/0, rev 1.10/1.10, addr 4> on usbus1 kbd3 at ukbd0 uhid0: <USB USB Keykoard, class 0/0, rev 1.10/1.10, addr 4> on usbus1 Root mount waiting for: usbus0 Trying to mount root from ufs:/dev/da2s1a ZFS filesystem version 4 ZFS storage pool version 15 em0: link state changed to UP em1: link state changed to UP ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4D8C9495.90103>