Date: Tue, 14 Jun 2005 03:25:29 -0500 From: Nikolas Britton <nikolas.britton@gmail.com> To: Ev Batey WA6CRE <efbatey@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: Need a HELP Lead .. For: xorg 6.8.2 - wont start Message-ID: <ef10de9a05061401252cc532a3@mail.gmail.com> In-Reply-To: <041780c01e03d811542a974800833660@gmail.com> References: <mailman.4105.1118608891.7399.xorg@lists.freedesktop.org> <e3ef6b7905061309555babd108@mail.gmail.com> <20050613210209.GA7917@slackbox.xs4all.nl> <041780c01e03d811542a974800833660@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 6/14/05, Ev Batey WA6CRE <efbatey@gmail.com> wrote: > > [snipped (every thing)] > > The KM400 uses the VIA S3 UniChrome. Try changing the driver section in the xorg.conf file to the via driver. "man via" for more info. Starting with a fresh xorg.conf file might be good idea too, "Xorg -configure". As far as the KM266 thingy, both FreeBSD and Xorg say it's a KM400 Chipset*.... see the bottom of my post. *sorry I allmost missed that, the system says it has a "CLE266", not a KM266. The CLE266 uses the UniChrome: "(II) VIA(0): VESA VBE OEM: VIA CLE266" ------------------------------------ "MSI KM3M-V (VIA KM266, registers as KM400)" "Have an MSI KM3M-V KM266 (supposedly an S3 Savage like chip)." ------------------------------------- ABI class: X.Org <http://x.org/>; Video Driver, version 0.7 (II) VIA(0): VESA BIOS detected (II) VIA(0): VESA VBE Version 3.0 (II) VIA(0): VESA VBE Total Mem: 65536 kB (II) VIA(0): VESA VBE OEM: VIA CLE266 (II) VIA(0): VESA VBE OEM Software Rev: 0.0 (--) VIA(0): Chipset: "KM400" (--) VIA(0): Chipset Rev.: 132 (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (--) VIA(0): mapping MMIO @ 0xec000000 with size 0x9000 (==) VIA(0): Write-combining range (0xec000000,0x9000) was already clear (--) VIA(0): mapping BitBlt MMIO @ 0xec200000 with size 0x10000 (==) VIA(0): Write-combining range (0xec200000,0x10000) was already clear (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) VIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) VIA(0): videoram = 65536k ------------------------------------- agp0: <VIA 8235/8237 (Apollo KM400/KM400A) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000 agp0: allocating GATT for aperture of size 256M ------------------------------------- http://www.via.com.tw/en/products/chipsets/legacy/km266/ http://www.via.com.tw/en/products/chipsets/k7-series/km400/ KM266 = S3 Graphics ProSavage8 KM400 = UniChrome™ 2D/3D Graphics with motion compensation
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ef10de9a05061401252cc532a3>