Date: Thu, 23 Mar 2000 14:24:33 -0600 From: "Travis Leuthauser" <travis@winconx.com> To: <freebsd-questions@freebsd.org> Subject: Re: OnBoard Sound Message-ID: <006f01bf9505$cd577820$20503cd0@travis> References: <05ea01bf9391$28389100$20503cd0@travis>
next in thread | previous in thread | raw e-mail | index | archive | help
I know it's bad form to reply to my own message, but the sound chipset is a cmi8330. I searched the archives and found a few posts questioning problems, but no responses with a solution. Thanks again, Travis Leuthauser ----- Original Message ----- From: "Travis Leuthauser" <travis@winconx.com> To: <freebsd-questions@freebsd.org> Sent: Tuesday, March 21, 2000 5:57 PM Subject: OnBoard Sound > I am running FreeBSD 3.4-RELEASE on an AMD K6 300. I am using a Matsonic > 5025S with OnBoard sound. I am having problems getting the sound working > properly. Throughout playing, I can hear the sound, but it's very jumpy. > I'm relatively new to setting up sound. Any suggestions would be greatly > appreciated. > > Thanks, > Travis Leuthauser > > Exact Errors: > These errors come up as soon as I execute the play command > server# play test.wav > Mar 21 17:51:11 server /kernel: dsp stereo: 2 is invalid, assuming 1 > Mar 21 17:51:11 server /kernel: dsp stereo: 2 is invalid, assuming 1 > > These errors come up just as the wav file finishes playing > Mar 21 17:51:47 server /kernel: timeout flushing dbuf_out, chan 3 cnt > 0xfffd6dc0 flags 0x00000141 > Mar 21 17:51:47 server /kernel: timeout flushing dbuf_out, chan 3 cnt > 0xfffd6dc0 flags 0x00000141 > > relevant line from /boot/kernel.conf > pnp 1 0 os enable port0 0x530 irq0 10 drq0 3 > > relevant lines from kernel config > device pcm0 at isa? port 0x530 tty irq 10 drq 3 flags 0x15 > > dmesg output: > pcm0 at 0x530 irq 10 drq 3 flags 0x9115 on isa > mss_attach <mss>0 at 0x530 irq 10 dma 3:5 flags 0x9115 > > pnpinfo output: > Checking for Plug-n-Play devices... > > Card assigned CSN #1 > Vendor ID CMI0001 (0x0100a90d), Serial Number 0x01000100 > PnP Version 1.0, Vendor Version 0 > Device Description: CMI8330. Audio Adapter > > Logical Device ID: @@@0001 0x01000000 #0 > TAG Start DF > Good Configuration > I/O Range 0x530 .. 0x530, alignment 0x1, len 0x8 > [16-bit addr] > I/O Range 0x388 .. 0x388, alignment 0x1, len 0x8 > [16-bit addr] > IRQ: 11 - only one type (true/edge) > DMA: channel(s) 0 > 8-bit, not a bus master, count by byte, , Compatibility mode > TAG Start DF > Acceptable Configuration > I/O Range 0x530 .. 0x530, alignment 0x1, len 0x8 > [16-bit addr] > I/O Range 0x388 .. 0x388, alignment 0x1, len 0x8 > [16-bit addr] > IRQ: 5 7 9 10 11 12 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > TAG Start DF > Acceptable Configuration > I/O Range 0xe80 .. 0xf40, alignment 0xc0, len 0x8 > [16-bit addr] > I/O Range 0x388 .. 0x3f8, alignment 0x10, len 0x8 > [16-bit addr] > IRQ: 5 7 9 10 11 12 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > TAG End DF > > Logical Device ID: @H@0001 0x01000001 #1 > TAG Start DF > Good Configuration > I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2 > [16-bit addr] > IRQ: 9 - only one type (true/edge) > TAG Start DF > Acceptable Configuration > I/O Range 0x300 .. 0x330, alignment 0x10, len 0x2 > [16-bit addr] > IRQ: 5 7 9 10 11 12 - only one type (true/edge) > server# pnpinfo | more > Checking for Plug-n-Play devices... > > Card assigned CSN #1 > Vendor ID CMI0001 (0x0100a90d), Serial Number 0x01000100 > PnP Version 1.0, Vendor Version 0 > Device Description: CMI8330. Audio Adapter > > Logical Device ID: @@@0001 0x01000000 #0 > TAG Start DF > Good Configuration > I/O Range 0x530 .. 0x530, alignment 0x1, len 0x8 > [16-bit addr] > I/O Range 0x388 .. 0x388, alignment 0x1, len 0x8 > [16-bit addr] > IRQ: 11 - only one type (true/edge) > DMA: channel(s) 0 > 8-bit, not a bus master, count by byte, , Compatibility mode > TAG Start DF > Acceptable Configuration > I/O Range 0x530 .. 0x530, alignment 0x1, len 0x8 > [16-bit addr] > I/O Range 0x388 .. 0x388, alignment 0x1, len 0x8 > [16-bit addr] > IRQ: 5 7 9 10 11 12 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > TAG Start DF > Acceptable Configuration > I/O Range 0xe80 .. 0xf40, alignment 0xc0, len 0x8 > [16-bit addr] > I/O Range 0x388 .. 0x3f8, alignment 0x10, len 0x8 > [16-bit addr] > IRQ: 5 7 9 10 11 12 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > TAG End DF > > Logical Device ID: @H@0001 0x01000001 #1 > TAG Start DF > Good Configuration > I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2 > [16-bit addr] > IRQ: 9 - only one type (true/edge) > TAG Start DF > Acceptable Configuration > I/O Range 0x300 .. 0x330, alignment 0x10, len 0x2 > [16-bit addr] > IRQ: 5 7 9 10 11 12 - only one type (true/edge) > TAG End DF > > Logical Device ID: @P@0001 0x01000002 #2 > TAG Start DF > Good Configuration > I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8 > [16-bit addr] > TAG Start DF > Acceptable Configuration > I/O Range 0x200 .. 0xfe0, alignment 0x10, len 0x8 > [16-bit addr] > TAG End DF > > Logical Device ID: @X@0001 0x01000003 #3 > TAG Start DF > Good Configuration > I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10 > [16-bit addr] > IRQ: 5 - only one type (true/edge) > DMA: channel(s) 1 > 8-bit, not a bus master, count by byte, , Compatibility mode > DMA: channel(s) 5 > 16-bit, not a bus master, , count by word, Compatibility mode > TAG Start DF > Acceptable Configuration > I/O Range 0x220 .. 0x240, alignment 0x20, len 0x10 > [16-bit addr] > IRQ: 5 7 9 10 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > DMA: channel(s) 5 7 > 16-bit, not a bus master, , count by word, Compatibility mode > TAG Start DF > Acceptable Configuration > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 > [16-bit addr] > IRQ: 5 7 9 10 11 12 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > DMA: channel(s) 5 7 > 16-bit, not a bus master, , count by word, Compatibility mode > TAG End DF > End Tag > > Successfully got 50 resources, 4 logical fdevs > -- card select # 0x0001 > > CSN CMI0001 (0x0100a90d), Serial Number 0x01000100 > > Logical device #0 > IO: 0x0530 0x0388 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 10 0 > DMA 3 0 > IO range check 0x00 activate 0x01 > > Logical device #1 > IO: 0x0330 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 9 0 > DMA 0 0 > IO range check 0x00 activate 0x01 > > Logical device #2 > IO: 0x0200 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 0 0 > DMA 0 0 > IO range check 0x00 activate 0x01 > > Logical device #3 > IO: 0x0220 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 5 0 > DMA 1 5 > IO range check 0x00 activate 0x01 > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?006f01bf9505$cd577820$20503cd0>