Date: Thu, 26 Jun 2003 16:25:41 -0700 (PDT) From: Julian Elischer <julian@elischer.org> To: Will Saxon <WillS@housing.ufl.edu> Cc: Bill Paul <wpaul@freebsd.org> Subject: RE: Heads up: checking in change to ata-card.c Message-ID: <Pine.BSF.4.21.0306261622090.12070-100000@InterJet.elischer.org> In-Reply-To: <0E972CEE334BFE4291CD07E056C76ED8CBBCAB@bragi.housing.ufl.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Nvidia (I previously didn't know they made full chipsets) IDE interfaces got broken around FreeBSD 4.3 and at 4.8 they are still not working.. There is however a workaround which is to disable the use of DMA on the devices (in the loader.conf file). if you don't the system hangs during boot. I have only sporadic access to one, but I don't have one myself which makes it hard to test more.. I have not tested it on 5.x yet.. On Thu, 26 Jun 2003, Will Saxon wrote: > > > > -----Original Message----- > > From: David Xu [mailto:davidxu@freebsd.org] > > Sent: Thursday, June 26, 2003 6:30 PM > > To: Soeren Schmidt; Bill Paul > > Cc: imp@freebsd.org; current@freebsd.org > > Subject: Re: Heads up: checking in change to ata-card.c > > > > > > I have another problem different with Bill Paul's. > > I have a Tyan Tiger 230T dual CPU MB. On second IDE, > > there are MITSUBISHI 52X CDROM as master and a SONY > > CD-RW CRX140E 8X/4X/32X as slave. FreeBSD never got > > them to work, while MS Windows and Linux and NetBSD and > > OpenBSD all work well with these devices. FreeBSD always > > stuck at "MODE SENSE BIG", this sucks, I must disable > > second IDE in BIOS before booting into FreeBSD and > > reenable it before booting into another OS. I changed > > configuration several times, both DMA and PIO mode don't > > work, it works only when CR-RW is pulled. > > > > David Xu > > I started seeing this behavior also, but it started when I swapped drives from a dead Via dual chipset board machine (MSI 694D Pro, I think) into an athlon machine with an Asus A7Vsomething. I can get correct model numbers, etc. if helpful. This is a 4.8-RELEASE installation. I had to reboot the first time with an old 4.4 GENERIC leftover from installation, and I saw no errors, but after compiling a uniprocessor kernel I started seeing the above behavior. Although, I left it for awhile and eventually the machine does boot after about 30 of the MODE_SENSE_BIG, resetting devices lines. > > -Will > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0306261622090.12070-100000>