Date: Mon, 2 May 2022 19:23:10 -0700 From: bob prohaska <fbsd@www.zefox.net> To: Hans Petter Selasky <hps@selasky.org> Cc: Bakul Shah <bakul@iitbombay.org>, freebsd-net@freebsd.org, bob prohaska <fbsd@www.zefox.net> Subject: Re: 60+% ping packet loss on Pi3 under -current and stable-13 Message-ID: <20220503022310.GA19378@www.zefox.net> In-Reply-To: <0d131ec7-3c83-9470-7052-6a80af1bb574@selasky.org> References: <20220501181254.GA14961@www.zefox.net> <E0424240-1E6A-446F-A5BC-939BE8D5A6F2@yahoo.com> <CA5CAD79-F2B6-464D-978A-B9FFC8D2125A@yahoo.com> <20220501232757.GA15446@www.zefox.net> <2F4599BF-EEDA-4D08-AB6E-7AA9F410B2C5@yahoo.com> <20220502011312.GA15807@www.zefox.net> <6f57cd1d-e1d4-5ca4-e301-2633c1d4c1fa@selasky.org> <20220502155334.GA17962@www.zefox.net> <D400ADAB-9EB3-4CA1-8746-A378F9878B6A@iitbombay.org> <0d131ec7-3c83-9470-7052-6a80af1bb574@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, May 02, 2022 at 06:48:58PM +0200, Hans Petter Selasky wrote:
>
> You may also want to correlate:
>
> usbconfig dump_stats
>
On the -current Pi3 I see in part:
ugen1.4: <JMicron SABRENT> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
{
UE_CONTROL_OK : 83
UE_ISOCHRONOUS_OK : 0
UE_BULK_OK : 3730195
UE_INTERRUPT_OK : 0
UE_CONTROL_FAIL : 0
UE_ISOCHRONOUS_FAIL : 0
UE_BULK_FAIL : 61
UE_INTERRUPT_FAIL : 0
}
That's the USB3 hard disk boot drive. All other devices report zero bulk fails.
> with netstat for ue0 .
>
On the same machine one gets:
root@www:/home/bob # netstat -i -n ue0
Name Mtu Network Address Ipkts Ierrs Idrop Opkts Oerrs Coll
lo0 16384 <Link#1> lo0 185 0 0 185 0 0
lo0 - ::1/128 ::1 0 - - 0 - -
lo0 - fe80::%lo0/64 fe80::1%lo0 0 - - 0 - -
lo0 - 127.0.0.0/8 127.0.0.1 185 - - 185 - -
ue0 1500 <Link#2> b8:27:eb:71:46:4e 244278 0 0 213240 0 0
ue0 - 50.1.20.0/24 50.1.20.28 213957 - - 210970 - -
root@www:/home/bob #
Nothing obviously amiss....if I'm looking at the right data.
> Especially the BULK column. If something is wrong on the USB level, it will
> show up there.
>
On a whim, I checked a Pi4 running -current which also has a usb-sata boot drive.
It reports UE_BULK_FAIL : 56 for the disk and performance seems good.
An old Pi2 running -current with a relatively old USB2-sata boot disk
reports zero bulk errors. No bulk errors seems desirable, but is some
non-zero error rate normal?
All three machines have been updated within a couple of days.
Thanks for writing!
bob prohaska
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20220503022310.GA19378>