Date: Tue, 1 Apr 2003 20:17:06 +0200 (CEST) From: Marcel Stangenberger <marcel@hayholt.org> To: Jason Stewart <jstewart@rtl.org> Cc: freebsd-questions@freebsd.org Subject: Re: Smbfs woes Message-ID: <Pine.GSO.4.53.0304012016340.7268@eldar.hayholt.org> In-Reply-To: <1049220880.1587.26.camel@mis3> References: <1049220242.1448.19.camel@mis3> <Pine.GSO.4.53.0304012004450.7268@eldar.hayholt.org> <1049220880.1587.26.camel@mis3>
next in thread | previous in thread | raw e-mail | index | archive | help
perhaps i'm overlooking it, but i don't see your network card in here? Regards, Marcel -- Real programmers don't write in FORTRAN. FORTRAN is for pipe stress freaks and crystallography weenies. FORTRAN is for wimp engineers who wear white socks. On Tue, 1 Apr 2003, Jason Stewart wrote: > Here is my Kernel Config: > > Thanks again. > Jason > > # > # GENERIC -- Generic kernel configuration file for FreeBSD/i386 > # > # For more information on this file, please read the handbook section on > # Kernel Configuration Files: > # > # > http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html > # > # The handbook is also available locally in /usr/share/doc/handbook > # if you've installed the doc distribution, otherwise always see the > # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the > # latest information. > # > # An exhaustive list of options and more detailed explanations of the > # device lines is also present in the ./LINT configuration file. If you > are > # in doubt as to the purpose or necessity of a line, check first in > LINT. > # > # $FreeBSD$ > > machine i386 > cpu I686_CPU > ident MIS3C > maxusers 0 > > #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols > > options INET #InterNETworking > options FFS #Berkeley Fast Filesystem > options FFS_ROOT #FFS usable as root device [keep this!] > options SOFTUPDATES #Enable FFS soft updates support > options UFS_DIRHASH #Improve performance on big directories > options MFS #Memory Filesystem > options MD_ROOT #MD is a potential root device > options NFS #Network Filesystem > options NFS_ROOT #NFS usable as root device, NFS required > options MSDOSFS #MSDOS Filesystem > options CD9660 #ISO 9660 Filesystem > options CD9660_ROOT #CD-ROM usable as root, CD9660 required > options PROCFS #Process filesystem > options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] > options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI > options UCONSOLE #Allow users to grab the console > options USERCONFIG #boot -c editor > options VISUAL_USERCONFIG #visual boot -c editor > options KTRACE #ktrace(1) support > options SYSVSHM #SYSV-style shared memory > options SYSVMSG #SYSV-style message queues > options SYSVSEM #SYSV-style semaphores > options USER_LDT # Wine options > P1003_1B #Posix P1003_1B real-time extensions > options _KPOSIX_PRIORITY_SCHEDULING > options ICMP_BANDLIM #Rate limit bad replies > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > options AHC_REG_PRETTY_PRINT # Print register bitfields in debug > # output. Adds ~128k to driver. > options AHD_REG_PRETTY_PRINT # Print register bitfields in debug > # output. Adds ~215k to driver. > > # Networking > options IPX #IPX/SPX communications protocols > options NCP #NetWare Core protocol > > # SMB/CIFS requester > # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and > LIBICONV > # options. > # NETSMBCRYPTO enables support for encrypted passwords. > options NETSMB #SMB/CIFS requester > options NETSMBCRYPTO #encrypted password support for SMB > options LIBMCHAIN #mbuf management library > options LIBICONV > options SMBFS > > device isa > device pci > > # Sound Driver > device pcm > > # Floppy drives > device fdc0 at isa? port IO_FD1 irq 6 drq 2 > device fd0 at fdc0 drive 0 > device fd1 at fdc0 drive 1 > # > # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, > # don't use the above line for fdc0 but the following one: > #device fdc0 > > # ATA and ATAPI devices > device ata0 at isa? port IO_WD1 irq 14 > device ata1 at isa? port IO_WD2 irq 15 > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > options ATA_STATIC_ID #Static device numbering > > > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc0 at isa? port IO_KBD > device atkbd0 at atkbdc? irq 1 flags 0x1 > device psm0 at atkbdc? irq 12 > > device vga0 at isa? > > # splash screen/screen saver > pseudo-device splash > > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? flags 0x100 > > # Floating point support - do not disable. > device npx0 at nexus? port IO_NPX irq 13 > > # Power management support (see LINT for more options) > device apm0 at nexus? disable flags 0x20 # Advanced Power Management > > # PCCARD (PCMCIA) support > device card > device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 > device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable > > # Serial (COM) ports > device sio0 at isa? port IO_COM1 flags 0x10 irq 4 > device sio1 at isa? port IO_COM2 irq 3 > device sio2 at isa? disable port IO_COM3 irq 5 > device sio3 at isa? disable port IO_COM4 irq 9 > > # Parallel port > device ppc0 at isa? irq 7 > device ppbus # Parallel port bus (required) > device lpt # Printer > device ppi # Parallel port interface device > > > # Pseudo devices - the number indicates how many units to allocate. > pseudo-device loop # Network loopback > pseudo-device ether # Ethernet support > pseudo-device ppp 1 # Kernel PPP > pseudo-device tun # Packet tunnel. > pseudo-device pty # Pseudo-ttys (telnet etc) > pseudo-device md # Memory "disks" > pseudo-device gif # IPv6 and IPv4 tunneling > > # The `bpf' pseudo-device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > pseudo-device bpf #Berkeley packet filter > > # USB support > device uhci # UHCI PCI->USB interface > device ohci # OHCI PCI->USB interface > device usb # USB Bus (required) > device ugen # Generic > device ukbd # Keyboard > device ulpt # Printer > device ums # Mouse > device uscanner # Scanners > > > > On Tue, 2003-04-01 at 13:05, Marcel Stangenberger wrote: > > > Questions: > > > Did I break something when I made a new kernel? Why can smbfs not find a > > > broadcast interface? > > > > > > > can you provide your kernel configuration? > > > > Regards, > > > > Marcel > > _______________________________________________ > > freebsd-questions@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.53.0304012016340.7268>