Date: Mon, 17 Nov 2003 16:00:51 +0100 From: tom <tom@www.paniert.net> To: Joe Marcus Clarke <marcus@marcuscom.com> Cc: ports <ports@freebsd.org> Subject: Re: gnome2 port Message-ID: <1069081251.3fb8e2a382f9c@www.paniert.net> In-Reply-To: <1069023463.3752.30.camel@shumai.marcuscom.com> References: <1069021442.3fb7f902194ed@www.paniert.net> <1069023463.3752.30.camel@shumai.marcuscom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Zitat von Joe Marcus Clarke <marcus@marcuscom.com>: > On Sun, 2003-11-16 at 17:24, tom wrote: > > hi, > > when i try to do a "make install" of the gnome2 superport > > (/usr/ports/x11/gnome2) the install breaks in the gnome-panel dir: > > > > ---snip---- > > cc -DHAVE_CONFIG_H -I. -I. -I.. -I. -I. -I../gnome-panel -DPANEL_DEBUG > > -DGNOMELOCALEDIR=\""/usr/X11R6/share/locale"\" > > -DGLADEDIR=\""/usr/X11R6/share/gnome/panel"\" -DG_DISABLE_DEPRECATED > > -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED > > -DGDK_PIXBUF_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED > > -DPREFIX=\""/usr/X11R6"\" -DSYSCONFDIR=\""/usr/X11R6/etc"\" > > -DLIBDIR=\""/usr/X11R6/lib"\" -DDATADIR=\""/usr/X11R6/share/gnome"\" > > -DGTK_MENU_INTERNALS -DORBIT2=1 -D_THREAD_SAFE > -I/usr/local/include/orbit-2.0 > > -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include > > -I/usr/local/include/atk-1.0 -I/usr/local/include/libbonobo-2.0 > > -I/usr/local/include/bonobo-activation-2.0 -I/usr/local/include/libart-2.0 > > -I/usr/local/include/libxml2 -I/usr/local/include > -I/usr/X11R6/include/gtk-2.0 > > -I/usr/X11R6/lib/gtk-2.0/include -I/usr/X11R6/include/pango-1.0 > > -I/usr/X11R6/include -I/usr/local/include/freetype2 > > -I/usr/X11R6/include/libgnome-2.0 -I/usr/X11R6/include/gconf/2 > > -I/usr/X11R6/include/gnome-vfs-2.0 -I/usr/X11R6/lib/gnome-vfs-2.0/include > > -I/usr/X11R6/include/libgnomeui-2.0 > -I/usr/X11R6/include/libgnomecanvas-2.0 > > -I/usr/X11R6/include/libbonoboui-2.0 > -I/usr/X11R6/include/gnome-desktop-2.0 > > -I/usr/X11R6/include/startup-notification-1.0 > > -I/usr/X11R6/include/gnome-vfs-module-2.0 -I/usr/X11R6/include/libglade-2.0 > > > -DORBIT2=1 -D_THREAD_SAFE -I/usr/local/include/glib-2.0 > > -I/usr/local/lib/glib-2.0/include -I/usr/local/include/atk-1.0 > > -I/usr/local/include/libart-2.0 -I/usr/local/include/orbit-2.0 > > -I/usr/local/include/libbonobo-2.0 > -I/usr/local/include/bonobo-activation-2.0 > > -I/usr/local/include/libxml2 -I/usr/local/include > -I/usr/X11R6/include/gtk-2.0 > > -I/usr/X11R6/lib/gtk-2.0/include -I/usr/X11R6/include/pango-1.0 > > -I/usr/X11R6/include -I/usr/local/include/freetype2 > > -I/usr/X11R6/include/libgnomeui-2.0 -I/usr/X11R6/include/libgnome-2.0 > > -I/usr/X11R6/include/libgnomecanvas-2.0 -I/usr/X11R6/include/gconf/2 > > -I/usr/X11R6/include/libbonoboui-2.0 -I/usr/X11R6/include/gnome-vfs-2.0 > > -I/usr/X11R6/lib/gnome-vfs-2.0/include -I/usr/X11R6/include/libglade-2.0 > -Wall > > -Wmissing-prototypes -I/usr/local/include -I/usr/X11R6/include -O > -pipe > > -march=k6 -c button-widget.c > > button-widget.c: In function `button_widget_class_init': > > button-widget.c:789: `PANEL_TYPE_ORIENTATION' undeclared (first use in > this > > function) > > button-widget.c:789: (Each undeclared identifier is reported only once > > button-widget.c:789: for each function it appears in.) > > gmake[1]: *** [button-widget.o] Error 1 > > gmake[1]: Leaving directory > > `/usr/ports/x11/gnomepanel/work/gnome-panel-2.4.1/gnome-panel' > > gmake: *** [install-recursive] Error 1 > > *** Error code 2 > > --------- > > > > could anyone give me a hint what i can do?? > > The header file that defines this macro is dynamically generated at > build-time by glib-mkenums. Make sure all your ports are up-to-date > (especially glib20), then make clean in gnomepanel, and try the build > again. > > Joe > > > > > thanx in advance, tom > > > > _______________________________________________ > > freebsd-ports@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-ports > > To unsubscribe, send any mail to "freebsd-ports-unsubscribe@freebsd.org" > -- > PGP Key : http://www.marcuscom.com/pgp.asc > thanx for the tip; after reinstalling glib2 the compile did work but now i hang in the gstreamer-plugins: ---snip------------- gmake all-am gmake[4]: Entering directory `/usr/ports/multimedia/gstreamer-plugins/work/gst-plugins-0.6.4/gst/level' source='gstlevel.c' object='libgstlevel_la-gstlevel.lo' libtool=yes \ depfile='.deps/libgstlevel_la-gstlevel.Plo' tmpdepfile='.deps/libgstlevel_la-gstlevel.TPlo' \ depmode=gcc /bin/sh ../../depcomp \ /bin/sh ../../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/X11R6/include -I/usr/local/include -I../../gst-libs -D_THREAD_SAFE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include/libxml2 -I/usr/local/include -I/usr/X11R6/include/gstreamer-0.6 -DGST_DISABLE_DEPRECATED -g -Wall -O -pipe -march=k6 -I/usr/local/include -c -o libgstlevel_la-gstlevel.lo `test -f 'gstlevel.c' || echo './'`gstlevel.c cc -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/X11R6/include -I/usr/local/include -I../../gst-libs -D_THREAD_SAFE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include/libxml2 -I/usr/local/include -I/usr/X11R6/include/gstreamer-0.6 -DGST_DISABLE_DEPRECATED -g -Wall -O -pipe -march=k6 -I/usr/local/include -c gstlevel.c -Wp,-MD,.deps/libgstlevel_la-gstlevel.TPlo -fPIC -DPIC -o libgstlevel_la-gstlevel.lo In file included from gstlevel.c:190: filter.func: In function `gst_level_fast_16bit_chain': filter.func:15: syntax error before `normalizer' filter.func:30: `normalizer' undeclared (first use in this function) filter.func:30: (Each undeclared identifier is reported only once filter.func:30: for each function it appears in.) In file included from gstlevel.c:195: filter.func: In function `gst_level_fast_8bit_chain': filter.func:15: syntax error before `normalizer' filter.func:30: `normalizer' undeclared (first use in this function) gmake[4]: *** [libgstlevel_la-gstlevel.lo] Error 1 gmake[4]: Leaving directory `/usr/ports/multimedia/gstreamer-plugins/work/gst-plugins-0.6.4/gst/level' gmake[3]: *** [all] Error 2 gmake[3]: Leaving directory `/usr/ports/multimedia/gstreamer-plugins/work/gst-plugins-0.6.4/gst/level' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/usr/ports/multimedia/gstreamer-plugins/work/gst-plugins-0.6.4/gst' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/ports/multimedia/gstreamer-plugins/work/gst-plugins-0.6.4' gmake: *** [all] Error 2 *** Error code 2 Stop in /usr/ports/multimedia/gstreamer-plugins. ----------------------- i already did another make clean but the error did not change... tom
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1069081251.3fb8e2a382f9c>