Date: Sun, 5 Jan 2014 17:41:08 -0800 From: Adrian Chadd <adrian@freebsd.org> To: Anton <felix_mail@mail.ru> Cc: "\\\\\\freebsd-mips@freebsd.org\\\\\\" <freebsd-mips@freebsd.org> Subject: Re: Re[6]: RB450G compiling the kernel Message-ID: <CAJ-VmokQW2uR7jHjzXxEnH4b%2BS-3Tf28DWb7Cn2qsR1U0aEBQw@mail.gmail.com> In-Reply-To: <1388917050.228853059@f25.i.mail.ru> References: <1388404360.131024714@f310.i.mail.ru> <1388826328.503909163@f428.i.mail.ru> <CAJ-VmomrkYKqmUq=B_b6FQ4Qn60Lf0oR%2Bjy0CnyKj-A6w3CVGQ@mail.gmail.com> <1388917050.228853059@f25.i.mail.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
Yes pleas! -a On 5 January 2014 02:17, Anton <felix_mail@mail.ru> wrote: > Hi Adrian, > > I can post my kernel configs after a week. If it's needed. > > -- > > =D7=CF=D3=CB=D2=C5=D3=C5=CE=D8=C5, 05 =D1=CE=D7=C1=D2=D1 2014=C7., 05:29 = +0400 =CF=D4 Adrian Chadd > <adrian@freebsd.org>: > > Right. Well, let's try and figure out exactly what we should commit to > freebsd-head so we have a known working kernel config + hints for the > RB450. > > Thanks! > > -a > > On 4 January 2014 01:05, Anton < felix_mail@mail.ru > wrote: >> Adrian, >> >> I'm using the custom hints for RB450 without including other hint files. >> Maybe my mistake was in this. >> -- >> >> =D7=D4=CF=D2=CE=C9=CB, 31 =C4=C5=CB=C1=C2=D2=D1 2013=C7., 21:57 +0400 = =CF=D4 Adrian Chadd >> < adrian@freebsd.org >: >> >> Which kernel configuration file are you building with? >> >> -a >> >> On 31 December 2013 00:23, Anton < felix_mail@mail.ru > wrote: >>> Adrian thanks! >>> >>> I resolved the problem. There was need to add both options in hints fil= e >>> at >>> the same time. >>> >>> hints.argemdio.0.at=3D"nexus0" >>> hints.argemdio.0. >>> .... >>> hints.arge.0.at=3D"nexus0" >>> hints.arge.0. >>> .... >>> >>> =F0=CF=CE=C5=C4=C5=CC=D8=CE=C9=CB, 30 =C4=C5=CB=C1=C2=D2=D1 2013, 11:38= -08:00 =CF=D4 Adrian Chadd >>> < adrian@freebsd.org >: >>> >>> On 30 December 2013 03:52, =E1=CE=D4=CF=CE =F0=C5=D4=D5=C8=CF=D7 < fel= ix_mail@mail.ru > wrote: >>>> >>>> Hi, >>>> Can you help me? How can I use AR7161 + AR8316 as two interfaces >>>> available >>>> to the kernel? Etherswitch is very good solution, but he's black box f= or >>>> me. >>>> If I try to compile kernel with switch - all is Ok, but in this case >>>> system >>>> have only one arge1. >>>> I need to route traffic between arge0 and arge1 ports... How, how can = I >>>> do >>>> it? :) >>> >>> Well, it depends on how it's wired up. >>> >>> The AR8316 (and other atheros switches) have an option to peel off one >>> of the ports as a dedicated PHY port, for situations where you have >>> two MACs on the SoC and you want to have a WAN port and multiple LAN >>> ports. >>> >>> Theres three ways to do it: >>> >>> * have one MAC port, map all switch ports to it, then peel off lan/wan >>> via VLAN ids >>> * have two MAC ports, have one port dedicated as a pass-through PHY >>> for the WAN port and the rest be switch ports for the LAN (vlan or >>> otherwise) >>> * a hybrid - have two MAC ports, and just map them using vlan ids or >>> per-port vlans as required. >>> >>> So it boils down to whether the RB450G wires both arge interfaces to >>> the switch. If so, you can peel off a dedicated WAN PHY/port by >>> configuring up the 'phy4cpu' option in the hints file. Otherwise it's >>> vlans all the way down. >>> >>> >>> -adrian >>> >>> >>> >>> -- >>> Anton
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmokQW2uR7jHjzXxEnH4b%2BS-3Tf28DWb7Cn2qsR1U0aEBQw>