Date: Wed, 13 Feb 2013 09:29:06 +0200 From: Daniel Braniss <danny@cs.huji.ac.il> To: "Teske, Devin" <Devin.Teske@fisglobal.com> Cc: "freebsd-stable@freebsd.org" <freebsd-stable@freebsd.org> Subject: Re: ix? / Intel(R) PRO/10GbE Message-ID: <E1U5WmA-000Or3-TL@kabab.cs.huji.ac.il> In-Reply-To: <13CA24D6AB415D428143D44749F57D7201EA7586@ltcfiswmsgmb21> References: <E1U5Hg8-0007wo-5r@kabab.cs.huji.ac.il> <13CA24D6AB415D428143D44749F57D7201EA7586@ltcfiswmsgmb21>
next in thread | previous in thread | raw e-mail | index | archive | help
> On Tue, 12 Feb 2013, Daniel Braniss wrote: >=20 > > I finally got a 10G card that is recognized by FreeBSD (9.1-stable): > > ... > > ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.4.8>= port > > 0xecc0-0xecdf mem 0xd9e80000-0xd9efffff,0xd9ff8000-0xd9ffbfff irq 40 = at d=3Device > > 0.0 on pci4 > > ix0: Using MSIX interrupts with 9 vectors > > ix0: RX Descriptors exceed system mbuf max, using default instead=21 > > From reading sys/dev/ixgbe/README: >=20 > echo =22kern.ipc.nmbclusters=3D262144=22 >> /etc/sysctl.conf > echo =22kern.ipc.nmbjumbop=3D262144=22 >> /etc/sysctl.conf > reboot > -- > Devin > Hi Devin, keep forgetting, 'may the source be with you' :-) but this only works if the driver is loaded after the sysctl is executed=21 it's better to put it in /boot/loader.conf thanks, danny
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1U5WmA-000Or3-TL>