Date: Wed, 14 Feb 2001 13:30:07 +0100 (CET) From: Claude Buisson <ubc@paris.framatome.fr> To: Mike Meyer <mwm@mired.org> Cc: questions@freebsd.org Subject: Re: Need help for cdrecord on system with multiple SCSI adapters Message-ID: <Pine.BSF.4.10.10102141326180.7544-100000@eve.framatome.fr> In-Reply-To: <14986.28311.882758.995030@guru.mired.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 14 Feb 2001, Mike Meyer wrote: > Claude Buisson <ubc@paris.framatome.fr> types: > > camcontrol devlist -v gives: > > scbus0 on ahc0 bus 0: > > <SEAGATE ST39204LC 0005> at scbus0 target 0 lun 0 (pass0,da0) > > <SEAGATE ST39204LC 0005> at scbus0 target 1 lun 0 (pass1,da1) > > <SEAGATE ST39204LC 0005> at scbus0 target 2 lun 0 (pass2,da2) > > <DELL 1x6 U2W SCSI BP 5.35> at scbus0 target 6 lun 0 (pass3) > > < > at scbus0 target -1 lun -1 () > > scbus1 on ahc1 bus 0: > > <NEC CD-ROM DRIVE:466 1.06> at scbus1 target 5 lun 0 (pass4,cd0) > > < > at scbus1 target -1 lun -1 () > > scbus2 on ahc2 bus 0: > > <HP CD-Writer+ 9600 1.0a> at scbus2 target 4 lun 0 (pass5,cd1) > > < > at scbus2 target -1 lun -1 () > > scbus-1 on xpt0 bus 0: > > < > at scbus-1 target -1 lun -1 (xpt0) > > > > but cdrecord -scanbus sees only scbus0 > > How can I use the cdwriter on scbus2 ? > > Very wierd. "cdrecord -scanbus" finds both of my buses and what's on > them. Just solved the problem: the default number of /dev/pass? is not sufficient (only 4). Done a MAKEDEV pass6, and everything is now OK. > > Did you try just using it by setting CDR_DEVICE to "2,4,0? > > <mike > -- > Mike Meyer <mwm@mired.org> http://www.mired.org/home/mwm/ > Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. > Thanks for replying, Claude Buisson To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10102141326180.7544-100000>