Date: Mon, 8 May 1995 04:50:07 +0900 From: hosokawa@mt.cs.keio.ac.jp (HOSOKAWA Tatsumi) To: phk@ref.tfs.com Cc: freebsd-hackers@FreeBSD.org, hosokawa@mt.cs.keio.ac.jp Subject: Re: Bug of if_ze is serious! (Re: Help! if_ze bug?) Message-ID: <199505071950.EAA03262@remington.mt.cs.keio.ac.jp> In-Reply-To: Your message of Sun, 7 May 1995 11:01:30 -0700 (PDT). <199505071801.LAA10362@ref.tfs.com>
next in thread | previous in thread | raw e-mail | index | archive | help
In article <199505071801.LAA10362@ref.tfs.com> phk@ref.tfs.com writes: >> Well, do you have any other cards in the machine ? I'm using MEGAHERTZ XJ2144 with PCMCIA sio patch, but ze didn't work without configuring the card. Moreover, ze sends ill packets on 'virgin' 0322-SNAP and -current when it was configured on 0xd0000. >> What is flags 0x10 anyway ? It's delayed-attach flags. But ze did not run without this patch and runs fine with this patch when it isn't configured on 0xd0000. So I think it isn't guilty :-). Now I tested again on virgin src of 950322-SNAP. It spits ill packets. ********************************************************************** hosokawa[ryukyu:~] ping -s 100 vivian PING vivian.mt.cs.keio.ac.jp (131.113.32.112): 100 data bytes 108 bytes from 131.113.32.112: icmp_seq=0 ttl=255 time=1.434 ms ^C --- vivian.mt.cs.keio.ac.jp ping statistics --- 1 packets transmitted, 1 packets received, 0% packet loss round-trip min/avg/max = 1.434/1.434/1.434 ms hosokawa[ryukyu:~] ping -s 200 vivian PING vivian.mt.cs.keio.ac.jp (131.113.32.112): 200 data bytes 208 bytes from 131.113.32.112: icmp_seq=0 ttl=255 time=0.929 ms ^C --- vivian.mt.cs.keio.ac.jp ping statistics --- 1 packets transmitted, 1 packets received, 0% packet loss round-trip min/avg/max = 0.929/0.929/0.929 ms hosokawa[ryukyu:~] ping -s 400 vivian PING vivian.mt.cs.keio.ac.jp (131.113.32.112): 400 data bytes 408 bytes from 131.113.32.112: icmp_seq=0 ttl=255 time=1.780 ms ^C --- vivian.mt.cs.keio.ac.jp ping statistics --- 1 packets transmitted, 1 packets received, 0% packet loss round-trip min/avg/max = 1.780/1.780/1.780 ms hosokawa[ryukyu:~] ping -s 800 vivian PING vivian.mt.cs.keio.ac.jp (131.113.32.112): 800 data bytes ^C --- vivian.mt.cs.keio.ac.jp ping statistics --- 3 packets transmitted, 0 packets received, 100% packet loss ********************************************************************** The config file I used, follows. ********************************************************************** machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" ident ZE_TEST maxusers 10 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MFS #Memory File System options MSDOSFS #MSDOS Filesystem #options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 #options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console # # These three options provide support for System V Interface # Definition-style interprocess communication, in the form of shared # memory, semaphores, and message queues, respectively. # options SYSVSHM options SYSVSEM options SYSVMSG # laptop-specific configuration #options "APM_SLOWSTART=5" #options LAPTOP #options COM_PCMCIA #options COM_CIS_IRQ_BUG # Buggy!! #options COM_PCMCIA_RESUME config kernel root on wd0 swap on wd0 and wd1 and sd0 and sd1 and vn0 dumps on wd0 controller isa0 #controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 #tape ft0 at fdc0 drive 2 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 #controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 #controller ncr0 #controller ahc0 #controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr #controller ahc1 at isa? bio irq ? vector ahcintr #controller ahb0 at isa? bio irq ? vector ahbintr #controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr #controller scbus0 #device sd0 #device st0 #device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr #controller matcd0 at isa? port ? #device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 #options XSERVER # include code for XFree86 device npx0 at isa? port "IO_NPX" irq 13 vector npxintr # my laptop uses sio1 for trackball, so I allocate sio2 for PCMCIA modem device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr #device sio2 at isa? port "IO_COM3" tty irq 10 iomem 0xd8000 flags 0x08 vector siointr #device lpt0 at isa? port? tty irq 7 vector lptintr #device lpt1 at isa? port? tty #device lpt2 at isa? port? tty #device de0 #device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr #device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr #device ix0 at isa? port 0x280 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr #device ep0 at isa? port 0x300 net irq 10 vector epintr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr device ze0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector zeintr #device zp0 at isa? port 0x300 net irq 10 iomem 0xd4000 vector zpintr device pca0 at isa? tty #device apm0 at isa? pseudo-device loop pseudo-device ether pseudo-device log #pseudo-device sl 1 #pseudo-device ppp 1 pseudo-device pty 16 pseudo-device speaker pseudo-device gzip # Exec gzipped a.out's pseudo-device vn pseudo-device tun 1 ********************************************************************** -- HOSOKAWA, Tatsumi E-mail: hosokawa@mt.cs.keio.ac.jp WWW homepage: http://www.mt.cs.keio.ac.jp/person/hosokawa.html Department of Computer Science, Keio University, Yokohama, Japan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199505071950.EAA03262>