Date: Tue, 08 Aug 1995 08:58:32 -0700 From: "Justin T. Gibbs" <gibbs@freefall.cdrom.com> To: john@starfire.mn.org Cc: questions@freebsd.org (FreeBSD questions) Subject: Re: Adaptec 3940W with FreeBSD Message-ID: <199508081558.IAA03965@freefall.cdrom.com> In-Reply-To: Your message of "Tue, 08 Aug 95 08:12:16 CDT." <199508081312.IAA13884@starfire.mn.org>
next in thread | previous in thread | raw e-mail | index | archive | help
>Is anyone using this controller (dual SCSI channel) with FreeBSD? If so, >what would be required in addition to adding the PCI_DEVICE_ID to at >least use it as a 2940W until I can add support for the other channel? >And, BTW, what is the PCI_DEVICE_ID for this board? Is there a particular >IRQ that needs to be assigned for things to work? > > John Lind, Starfire Consulting Services >E-mail: john@starfire.MN.ORG USnail: PO Box 17247, Mpls MN 55417 Both channels should be supported under FreeBSD-current. If you have a board to test on, I'll send you a patch that will allow up to 255 commands per channel instead of the hard coded 16. I haven't committed it yet because I don't have hardware to test it on. -- Justin T. Gibbs =========================================== Software Developer - Walnut Creek CDROM FreeBSD: Turning PCs into workstations ===========================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199508081558.IAA03965>