Date: Fri, 21 Feb 1997 20:37:52 -0500 (EST) From: John Fieber <jfieber@indiana.edu> To: Nate Williams <nate@mt.sri.com> Cc: current@freebsd.org, se@freebsd.org Subject: Re: new NCR errors in 2.2 branch Message-ID: <Pine.BSF.3.95q.970221203029.12505A-100000@fallout.campusview.indiana.edu> In-Reply-To: <199702220114.SAA05095@rocky.mt.sri.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 21 Feb 1997, Nate Williams wrote: > I just updated my sources after a 2 week trip, and now I'm getting > these. > > ncr0 <ncr 53c810 scsi> rev 2 int a irq 11 on pci0:12 > (ncr0:0:0): extraneous data discarded. > (ncr0:0:0): COMMAND FAILED (9 80) @f2111a9c. > (ncr0:0:0): "FUJITSU M1606S-512 6220" type 0 fixed SCSI 2 > sd0(ncr0:0:0): Direct-Access > sd0(ncr0:0:0): 10.0 MB/s (100 ns, offset 8) > 1041MB (2131992 512 byte sectors) > .... > sd0(ncr0:0:0): extraneous data discarded. > sd0(ncr0:0:0): extraneous data discarded. > sd0(ncr0:0:0): extraneous data discarded. My, that looks familiar! ncr0 <ncr 53c810a scsi> rev 17 int a irq 11 on pci0:12 ncr0 waiting for scsi devices to settle (ncr0:0:0): "FUJITSU M1606S-512 6226" type 0 fixed SCSI 2 sd0(ncr0:0:0): Direct-Access sd0(ncr0:0:0): 10.0 MB/s (100 ns, offset 8) 1041MB (2131992 512 byte sectors) ... sd0(ncr0:0:0): extraneous data discarded. sd0(ncr0:0:0): extraneous data discarded. ... With RELENG_2_2 from about a month ago, I discovered that by adding: cpu "I486_CPU" to my kernel config (I have a pentium and had removed the line), the messages went away. However, I just built a new kernel a couple days ago and the messages are back. :( I'm currious if this is somehow related to my tape drive problem (see recent posts in hardware@freebsd.org). I get several of the "extraneous data discarded" messages at boot, and then again when the tape device is opend (eg, by dump). -john
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.95q.970221203029.12505A-100000>