Date: Sat, 10 May 1997 15:15:33 -0700 From: Scott Blachowicz <scott@plum.statsci.com> To: freebsd-questions@freebsd.org Subject: Re: recent upgrade to XFree86 3.2 Message-ID: <m0wQKQQ-0007SEC@plum.statsci.com> In-Reply-To: Your message of "Sun, 23 Mar 1997 14:45:23 -0800." <199703232245.OAA05404@one.sabami.seaslug.org> References: <199703232245.OAA05404@one.sabami.seaslug.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Scott Blachowicz <scott@sabami.seaslug.org> wrote: > On my 2.1.5-RELEASE system at home, I just installed the XFree86 3.2 > distribution and I fired up the X server (XF86_Mach64 for a 2 year old > Mach64 card) and got some weird results. The colormap seems to get > screwed up. OK...now I have a little more data...I've upgraded my system to 2.2.1 (from the Walnut Creek CD) running XFree86 3.2A and I get the same results. I tried submitting a bug report via www.xfree86.org, but haven't gotten any response from that. Also... 1) it seems to work OK if I set '-bpp 16' instead of the default of '-bpp 8'. But, I only get 800x600 resolution out of it instead of 1280x1024 and I'd prefer the latter. 2) If I exit out of the screwy session with Ctrl-Alt-BackSpace, then do another 'startx', I get a panic out of FreeBSD: panic: ufs_lock: recursive lock not expected pid: 465 3) Appended to this message are the details from my bug report to XFree86.org... Any clues would be greatly appreciated! Scott Blachowicz Ph: 206/283-8802x240 Mathsoft (Data Analysis Products Div) 1700 Westlake Ave N #500 scott@statsci.com Seattle, WA USA 98109 Scott.Blachowicz@seaslug.org Regarding: XF86_Mach64 3.2 vs my colormap Email: Scott.Blachowicz@seaslug.org ------------------------------------------------------------ XFree86 Version: XFree86 Version 3.2 / X Window System Area: Xserver Server: XF86_Mach64 Video Card: (--) Mach64: PCI: Mach64 GX rev 1, Aperture @ 0xfb000000, Sparse I/O @ 0x02ec (--) Mach64: card type: PCI (--) Mach64: Memory type: 0 (--) Mach64: Clock type: ATI18818-1/ICS2595 (--) Mach64: Maximum allowed dot-clock: 135.000 MHz (**) Mach64: Mode "1280x1024": mode clock = 110.000 (**) Mach64: Mode "1024x768": mode clock = 85.000 (**) Mach64: Mode "800x600": mode clock = 50.000 (**) Mach64: Mode "640x480": mode clock = 31.500 (**) Mach64: Virtual resolution: 1280x1024 (--) Mach64: videoram: 2048k Description: The colormaps seem to be messed up on entry to server. Normally I get an initial ssh passphrase window with gray & dark blue colors, but with this server I get (pretty close to) black on black. After that I get an xterm window that normally has a wheat background, but now it is pink and my ctwm startup does the gradual dark screen to full intensity screen which instead of dark to light sequencing does this interesting technicolor effect. I've been using a XFree86 3.1.2 XF86_Mach64 server as a fallback and that _seems_ to work just fine. Output from the XF86_Mach64 server 3.2 follows: XFree86 Version 3.2 / X Window System (protocol Version 11, revision 0, vendor release 6100) Release Date: Oct 26 1996 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 2.2.0 Configured drivers: Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 1) Using syscons driver with X support (version 2.0) (using VT number 7) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200, 3 button emulation (timeout: 50ms) (**) Mach64: Graphics device ID: "ATI mach64" (**) Mach64: Monitor ID: "CTX 1765GM" (--) Mach64: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/10 0dpi/,/usr/X11R6/lib/X11/fonts/freefont/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X1 1R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/" (--) Mach64: PCI: Mach64 GX rev 1, Aperture @ 0xfb000000, Sparse I/O @ 0x02ec (--) Mach64: card type: PCI (--) Mach64: Memory type: 0 (--) Mach64: Clock type: ATI18818-1/ICS2595 (--) Mach64: Maximum allowed dot-clock: 135.000 MHz (**) Mach64: Mode "1280x1024": mode clock = 110.000 (**) Mach64: Mode "1024x768": mode clock = 85.000 (**) Mach64: Mode "800x600": mode clock = 50.000 (**) Mach64: Mode "640x480": mode clock = 31.500 (**) Mach64: Virtual resolution: 1280x1024 (--) Mach64: videoram: 2048k (--) Mach64: Using hardware cursor (--) Mach64: Using 8 MB aperture @ 0xfb000000 (--) Mach64: Ramdac is ATI-68875/TLC34075 (--) Mach64: Using 8 bits per RGB value (--) Mach64: Pixmap cache: 1 256x256 slots, 2 128x128 slots, 8 64x64 slots (--) Mach64: Font cache: 16 fonts PEX extension module not loaded XIE extension module not loaded Output from XF86_Mach64 3.1.2 server follows: XFree86 Version 3.1.2 / X Window System (protocol Version 11, revision 0, vendor release 6001) Operating System: FreeBSD 2.0.5 Configured drivers: Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 0) Using syscons driver with X support (version 2.0) (using VT number 7) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200, 3 button emulation (timeout: 50ms) (**) Mach64: Graphics device ID: "ATI mach64" (**) Mach64: Monitor ID: "CTX 1765GM" (--) Mach64: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/10 0dpi/,/usr/X11R6/lib/X11/fonts/freefont/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X1 1R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/" (--) Mach64: card type: PCI (--) Mach64: Clock type: ATI18818-1 (--) Mach64: Number of Clocks: 32 (--) Mach64: clocks: 50.35 56.64 63.00 72.00 40.00 44.90 49.50 50.00 (--) Mach64: clocks: 0.00 110.00 126.00 135.00 0.00 80.00 75.00 65.00 (--) Mach64: clocks: 25.18 28.32 31.50 36.00 20.00 22.45 24.75 25.00 (--) Mach64: clocks: 0.00 55.00 63.00 67.50 0.00 40.00 37.50 32.50 (--) Mach64: Maximum allowed dot-clock: 135.000 MHz (**) Mach64: Mode "1280x1024": mode clock = 110.000, clock used = 110.000 (**) Mach64: Mode "1024x768": mode clock = 65.000, clock used = 65.000 (**) Mach64: Mode "800x600": mode clock = 36.000, clock used = 36.000 (**) Mach64: Mode "640x480": mode clock = 25.175, clock used = 25.175 (**) Mach64: Virtual resolution: 1280x1024 (--) Mach64: videoram: 2048k (--) Mach64: Using hardware cursor (--) Mach64: Using 4 MB aperture (--) Mach64: Ramdac is ATI-68875/TLC34075 (--) Mach64: Using 6 bits per RGB value (--) Mach64: Aperture mapped to 0x7c000000 (--) Mach64: Pixmap cache: 1 256x256 slots, 2 128x128 slots, 8 64x64 slots (--) Mach64: Font cache: 16 fonts Repeat By: startx -- /usr/X11R6/bin/XF86_Mach64
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m0wQKQQ-0007SEC>