Date: Wed, 4 Jun 1997 09:33:33 +0200 (SAT) From: Reinier Bezuidenhout <rbezuide@oskar.nanoteq.co.za> To: henrich@crh.cl.msu.edu (Charles Henrich) Cc: freebsd-hackers@FreeBSD.ORG Subject: Re: Adaptec 2940UW Target Busy? Message-ID: <199706040733.JAA08365@oskar.nanoteq.co.za> In-Reply-To: <19970603163405.15409@crh.cl.msu.edu> from Charles Henrich at "Jun 3, 97 04:34:05 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
Hi .... I've been getting just about exactly the same messages when doing a "mt -f /dev/rst0 erase" with an adaptec 2940 (only) adapter ??? I am running 2.1.0-RELEASE ... the very latest code that includes all the fixes to the adaptec controller ... I get the same message and then the system recover and the almost the same message a second time and then the system hangs completely (probably because my disks are on the same bus :( ) I'm using an HP C1599A 4 Gig DAT drive (internal) .. if I connect a 2 Gig EXTERNAL HP DAT everyting seems to work fine ??? > sd2(ahc0:5:0): Target Busy > sd2(ahc0:5:0): SCB 0x7 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == > 0x0 > SEQADDR = 0x8 SCSISEQ = 0x12 SSTAT0 = 0x5 SSTAT1 = 0xa > Ordered Tag queued > sd2(ahc0:5:0): SCB 0x7 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == > 0x0 > SEQADDR = 0x7 SCSISEQ = 0x12 SSTAT0 = 0x5 SSTAT1 = 0xa > sd2(ahc0:5:0): Queueing an Abort SCB > sd2(ahc0:5:0): Abort Message Sent > sd2(ahc0:5:0): SCB 7 - Abort Tag Completed. > sd2(ahc0:5:0): no longer in timeout > Ordered Tag sent > sd2(ahc0:5:0): Target Busy > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199706040733.JAA08365>