Date: Tue, 12 May 1998 00:08:43 +0200 From: Ollivier Robert <roberto@keltia.freenix.fr> To: current@FreeBSD.ORG Subject: Re: Soft update code looking very stable Message-ID: <19980512000843.A11309@keltia.freenix.fr> In-Reply-To: <19980510234002J.ken@ns1.tydfam.machida.tokyo.jp>; from Takeshi Yamada on Sun, May 10, 1998 at 11:40:02PM %2B0900 References: <19980510234002J.ken@ns1.tydfam.machida.tokyo.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
According to Takeshi Yamada: > Isn't it possible to be because of the implementation detail > differences of drivers (Adaptec 2940U/W vs. DC390U/F<ncr53c875>)? I also have a NCR/Symbios based card, the ASUS SC-875. I'll try again. ncr0: <ncr 53c875 fast20 wide scsi> rev 0x03 int a irq 9 on pci0.11.0 scbus0 at ncr0 bus 0 sd0 at scbus0 target 0 lun 0 sd0: <IBM DCAS-34330W S65A> type 0 fixed SCSI 2 sd0: Direct-Access sd0: WIDE SCSI (16 bit) enabled sd0: 40.0 MB/s (50 ns, offset 15) 4134MB (8467200 512 byte sectors) sd1 at scbus0 target 1 lun 0 sd1: <IBM DCAS-34330W S65A> type 0 fixed SCSI 2 sd1: Direct-Access sd1: WIDE SCSI (16 bit) enabled sd1: 40.0 MB/s (50 ns, offset 15) 4134MB (8467200 512 byte sectors) sd2 at scbus0 target 2 lun 0 sd2: <IBM DORS-32160 WA6A> type 0 fixed SCSI 2 sd2: Direct-Access sd2: 20.0 MB/s (50 ns, offset 15) 2063MB (4226725 512 byte sectors) st1 at scbus0 target 4 lun 0 st1: <TANDBERG TDC 3600 =08:> type 1 removable SCSI 2 st1: Sequential-Access density code 0x0, drive empty -- Ollivier ROBERT -=- FreeBSD: The Power to Serve! -=- roberto@keltia.freenix.fr FreeBSD keltia.freenix.fr 3.0-CURRENT #8: Tue Apr 21 02:45:53 CEST 1998 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980512000843.A11309>