Date: Thu, 16 Jul 1998 15:01:42 -0700 (PDT) From: Doug White <dwhite@resnet.uoregon.edu> To: Peter Haight <psh1@cornell.edu> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Bad SCSI messages in syslog Message-ID: <Pine.BSF.4.00.9807161501090.21519-100000@resnet.uoregon.edu> In-Reply-To: <199807152125.OAA00223@wartch.rih.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 15 Jul 1998, Peter Haight wrote: > > Here is a copy of my syslog where some strange SCSI messages have been > occuring. I saw these once before and some of my disk was corrupted then. > Can someone explain them to me? Please reply directly as I'm not on the > list. Check your termination and make sure that ARRE and AWRE are enabled on yoru hard disk (which on Seagates they usually are). See the scsi(8) manpage for details on how to do this. > > Thanks > > --- /var/log/messages --- > Jul 14 21:03:38 wartch /kernel: Copyright (c) 1992-1998 FreeBSD Inc. > Jul 14 21:03:38 wartch /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993 > Jul 14 21:03:38 wartch /kernel: The Regents of the University of California. All rights reserved. > Jul 14 21:03:38 wartch /kernel: > Jul 14 21:03:38 wartch /kernel: FreeBSD 2.2.6-RELEASE #0: Tue May 26 18:38:24 PDT 1998 > Jul 14 21:03:38 wartch /kernel: peterh@wartch.rih.org.:/usr/src/sys/compile/WARTCH > Jul 14 21:03:38 wartch /kernel: CPU: Pentium Pro (300.68-MHz 686-class CPU) > Jul 14 21:03:38 wartch /kernel: Origin = "GenuineIntel" Id = 0x633 Stepping=3 > Jul 14 21:03:38 wartch /kernel: Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX> > Jul 14 21:03:38 wartch /kernel: real memory = 134217728 (131072K bytes) > Jul 14 21:03:38 wartch /kernel: avail memory = 129400832 (126368K bytes) > Jul 14 21:03:38 wartch /kernel: Probing for devices on PCI bus 0: > Jul 14 21:03:38 wartch /kernel: chip0 <generic PCI bridge (vendor=8086 device=7180 subclass=0)> rev 3 on pci0:0:0 > Jul 14 21:03:38 wartch /kernel: chip1 <generic PCI bridge (vendor=8086 device=7181 subclass=4)> rev 3 on pci0:1:0 > Jul 14 21:03:38 wartch /kernel: chip2 <Intel 82371AB PCI-ISA bridge> rev 1 on pci0:7:0 > Jul 14 21:03:38 wartch /kernel: chip3 <Intel 82371AB IDE interface> rev 1 on pci0:7:1 > Jul 14 21:03:38 wartch /kernel: chip4 <Intel 82371AB USB interface> rev 1 int d irq ?? on pci0:7:2 > Jul 14 21:03:38 wartch /kernel: chip5 <Intel 82371AB Power management controller> rev 1 on pci0:7:3 > Jul 14 21:03:38 wartch /kernel: ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 10 on pci0:14:0 > Jul 14 21:03:38 wartch /kernel: ahc0: aic7880 Wide Channel, SCSI Id=7, 16/255 SCBs > Jul 14 21:03:38 wartch /kernel: ahc0: target 1 Tagged Queuing Device > Jul 14 21:03:38 wartch /kernel: (ahc0:1:0): "SEAGATE ST34501W 0017" type 0 fixed SCSI 2 > Jul 14 21:03:38 wartch /kernel: sd0(ahc0:1:0): Direct-Access 4339MB (8887200 512 byte sectors) > Jul 14 21:03:38 wartch /kernel: sd0(ahc0:1:0): with 6576 cyls, 8 heads, and an average 168 sectors/track > Jul 14 21:03:38 wartch /kernel: (ahc0:2:0): "NEC CD-ROM DRIVE:464 1.04" type 5 removable SCSI 2 > Jul 14 21:03:38 wartch /kernel: cd0(ahc0:2:0): CD-ROM can't get the size > Jul 14 21:03:38 wartch /kernel: de0 <Digital 21140A Fast Ethernet> rev 34 int a irq 11 on pci0:15:0 > Jul 14 21:03:38 wartch /kernel: de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.2 > Jul 14 21:03:38 wartch /kernel: de0: address 00:e0:29:0c:66:07 > Jul 14 21:03:38 wartch /kernel: vga0 <VGA-compatible display device> rev 16 int a irq 9 on pci0:16:0 > Jul 14 21:03:38 wartch /kernel: Probing for devices on PCI bus 1: > Jul 14 21:03:38 wartch /kernel: Probing for PnP devices: > Jul 14 21:03:38 wartch /kernel: CSN 1 Vendor ID: CTL00c3 [0xc3008c0e] Serial 0x1c4d4482 > Jul 14 21:03:38 wartch /kernel: pcm1 (SB16pnp <SB16 PnP> sn 0x1c4d4482) at 0x220 irq 5 drq 1 flags 0x15 id 11 > Jul 14 21:03:39 wartch /kernel: Probing for devices on the ISA bus: > Jul 14 21:03:39 wartch /kernel: sc0 at 0x60-0x6f irq 1 flags 0x1 on motherboard > Jul 14 21:03:39 wartch /kernel: sc0: VGA color <16 virtual consoles, flags=0x1> > Jul 14 21:03:39 wartch /kernel: lpt0 at 0x378-0x37f irq 7 on isa > Jul 14 21:03:39 wartch /kernel: lpt0: Interrupt-driven port > Jul 14 21:03:39 wartch /kernel: lp0: TCP/IP capable interface > Jul 14 21:03:39 wartch /kernel: sio0 at 0x3f8-0x3ff irq 4 on isa > Jul 14 21:03:39 wartch /kernel: sio0: type 16550A > Jul 14 21:03:39 wartch /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa > Jul 14 21:03:39 wartch /kernel: sio1: type 16550A > Jul 14 21:03:39 wartch /kernel: pcm0 not found at 0xffffffff > Jul 14 21:03:39 wartch /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > Jul 14 21:03:39 wartch /kernel: fdc0: FIFO enabled, 8 bytes threshold > Jul 14 21:03:39 wartch /kernel: fd0: 1.44MB 3.5in > Jul 14 21:03:39 wartch /kernel: npx0 on motherboard > Jul 14 21:03:39 wartch /kernel: npx0: INT 16 interface > Jul 14 21:03:39 wartch /kernel: changing root device to st0s2a > Jul 14 21:03:39 wartch /kernel: mountmsdosfs(): Warning: root directory is not a multiple of the clustersize in length > Jul 14 21:03:39 wartch /kernel: de0: enabling 10baseT port > Jul 14 21:03:59 wartch amd[121]: NIS domain name is not set. NIS ignored. > Jul 15 04:05:30 wartch /kernel: sd0(ahc0:1:0): SCB 0x3 - timed out in dataout phase, SCSISIGI == 0x4 > Jul 15 04:05:37 wartch /kernel: SEQADDR = 0x4e SCSISEQ = 0x12 SSTAT0 = 0x7 SSTAT1 = 0x2 > Jul 15 04:05:37 wartch /kernel: Ordered Tag queued > Jul 15 04:05:37 wartch /kernel: sd0(ahc0:1:0): SCB 0x2 timedout while recovery in progress > Jul 15 04:05:37 wartch /kernel: sd0(ahc0:1:0): SCB 0x1 timedout while recovery in progress > Jul 15 04:05:37 wartch /kernel: sd0(ahc0:1:0): SCB 0x0 timedout while recovery in progress > Jul 15 04:05:37 wartch /kernel: sd0(ahc0:1:0): SCB 0x3 - timed out in dataout phase, SCSISIGI == 0x4 > Jul 15 04:05:37 wartch /kernel: SEQADDR = 0x4e SCSISEQ = 0x12 SSTAT0 = 0x7 SSTAT1 = 0x2 > Jul 15 04:05:37 wartch /kernel: sd0(ahc0:1:0): abort message in message buffer > Jul 15 04:05:37 wartch /kernel: sd0(ahc0:1:0): SCB 0x2 - timed out in dataout phase, SCSISIGI == 0x14 > Jul 15 04:05:37 wartch /kernel: SEQADDR = 0x4e SCSISEQ = 0x12 SSTAT0 = 0x7 SSTAT1 = 0x2 > Jul 15 04:05:37 wartch /kernel: sd0(ahc0:1:0): no longer in timeout > Jul 15 04:05:37 wartch /kernel: sd0(ahc0:1:0): no longer in timeout > Jul 15 04:05:37 wartch /kernel: ahc0: Issued Channel A Bus Reset. 4 SCBs aborted > Jul 15 04:05:37 wartch /kernel: sd0(ahc0:1:0): UNIT ATTENTION asc:29,0 > Jul 15 04:05:37 wartch /kernel: sd0(ahc0:1:0): Power on, reset, or bus device reset occurred field replaceable unit: 2 > Jul 15 04:05:37 wartch /kernel: , retries:3 > Jul 15 14:18:50 wartch /kernel: sd0(ahc0:1:0): SCB 0x2 - timed out in dataout phase, SCSISIGI == 0x4 > Jul 15 14:18:58 wartch /kernel: SEQADDR = 0x126 SCSISEQ = 0x12 SSTAT0 = 0x0 SSTAT1 = 0x2 > Jul 15 14:18:58 wartch /kernel: Ordered Tag queued > Jul 15 14:18:58 wartch /kernel: Ordered Tag sent > Jul 15 14:18:58 wartch /kernel: sd0(ahc0:1:0): SCB 0x2 - timed out in dataout phase, SCSISIGI == 0x4 > Jul 15 14:18:58 wartch /kernel: SEQADDR = 0x127 SCSISEQ = 0x12 SSTAT0 = 0x0 SSTAT1 = 0x2 > Jul 15 14:18:58 wartch /kernel: sd0(ahc0:1:0): abort message in message buffer > Jul 15 14:18:58 wartch /kernel: sd0(ahc0:1:0): SCB 0x2 - timed out in dataout phase, SCSISIGI == 0x14 > Jul 15 14:18:58 wartch /kernel: SEQADDR = 0x127 SCSISEQ = 0x12 SSTAT0 = 0x0 SSTAT1 = 0x2 > Jul 15 14:18:58 wartch /kernel: sd0(ahc0:1:0): no longer in timeout > Jul 15 14:18:58 wartch /kernel: ahc0: Issued Channel A Bus Reset. 3 SCBs aborted > Jul 15 14:18:58 wartch /kernel: sd0(ahc0:1:0): UNIT ATTENTION asc:29,0 > Jul 15 14:18:58 wartch /kernel: sd0(ahc0:1:0): Power on, reset, or bus device reset occurred field replaceable unit: 2 > Jul 15 14:18:58 wartch /kernel: , retries:3 > Jul 15 14:19:49 wartch syslogd: exiting on signal 15 Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.00.9807161501090.21519-100000>