Date: Mon, 4 Jan 1999 15:22:03 +0100 From: Hellmuth Michaelis <hm@hcswork.hcs.de> To: "Wilhelm B. Kloke" <wb@vestein.arb-phys.uni-dortmund.de> Cc: freebsd-isdn@FreeBSD.ORG Subject: Re: problem with Creatix PnP Message-ID: <19990104152202.A5233@hcswork.hcs.de> In-Reply-To: <199901041340.OAA09726@vestein.arb-phys.uni-dortmund.de>; from Wilhelm B. Kloke on Mon, Jan 04, 1999 at 02:40:19PM %2B0100 References: <199901041340.OAA09726@vestein.arb-phys.uni-dortmund.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Jan 04, 1999 at 02:40:19PM +0100, Wilhelm B. Kloke wrote:
> Hi,
>
> I have a problem getting my Creatix PnP card to work with FreeBSD-3.0-Current
> (i4bipr).
> CSN 2 Vendor ID: CTX0000 [0x0000980e] Serial 0x000091a2 Comp ID: @@@0000 [0x00000000]
> isic0: Creatix ISDN S0-16 P&P
> isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2) (Addr=0x100)
> isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0x160, AddrB=0x180)
> isic0 (i4b_pnp <Creatix S0/16 P+P> sn 0x000091a2) at 0x120 irq 12 flags 0x6 on isa
------------------^^
This seems to be the problem and this
> i4b-L1-timer3_expired: state = F4 Awaiting Signal
is an indication for that.
Most bus (?) mouses run on IRQ 12 these days, and unless you are able to
completely (!) disable your busmouse and free IRQ 12 fro use for ISA
cards, i recommend using another IRQ than 12.
In case your BIOS does not allow you to fiddle around with this, have a
look at the USER_CONFIG stuff (boot with -c) and read the pnp(4) man page
on how to setup this stuff with FreeBSD.
hellmuth
--
Hellmuth Michaelis Tel +49 40 559747-70
HCS Hanseatischer Computerservice GmbH Fax +49 40 559747-77
Oldesloer Strasse 97-99 Mail hm [at] hcs.de
22457 Hamburg WWW http://www.hcs.de
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990104152202.A5233>