Date: Sat, 5 Jun 1999 13:31:52 -0400 (EDT) From: Jim Pingle <pingjj01@holmes.ipfw.edu> To: Bill Paul <wpaul@FreeBSD.ORG> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Ensoniq AudioPCI (ES1370) pcm driver problem Message-ID: <Pine.HPX.4.10.9906051310170.10712-100000@holmes.ipfw.edu> In-Reply-To: <19990605160626.17EF514F12@hub.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
It worked like a charm, I didn't even think to reset that. It seemed like I had tinkered with just about everything except the BIOS settings. Thanks for the quick response, the help is much appreciated. On Sat, 5 Jun 1999, Bill Paul wrote: > > device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0 > > > > Upon bootup, I get the following message: > > > > es1: <AudioPCI ES1370> rev 0x00 int a irq 10 on pci0.15.0 > > pcm1: unable to map any ports > > Reboot your machine and go into the BIOS configuration. Look around > (maybe under the 'advanced' section) for a setting that say something > like 'Plug and Play OS.' The setting usually has two choices: 'yes' > or 'no.' If it says 'yes' then that's your problem. FreeBSD is not > a Plug and Play OS, in the sense that it can't assign PCI device > resources (I/O addresses, IRQs) itself: the PCI BIOS has to set up > the devices first, then FreeBSD reads the configuration info and > deals with it accordingly. I'll bet a quarter that when you bought > your system, it came with either Lose95 or Lose98 pre-installed, > and you never checked the BIOS settings when you installed FreeBSD. > > Anyway, change the BIOS 'Plug and Play OS' setting to 'no' and then > reboot the system. > > -Bill > - Jim Pingle jim@pingle.org * pingjj01@holmes.ipfw.edu p.s. - I kept the list in cc: so it would be left in the archives as a working solution for anyone who might get this error in the future. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.HPX.4.10.9906051310170.10712-100000>