Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 28 Jun 1999 13:13:13 -0500 (EST)
From:      Andre LeClaire <leclaire@sprintmail.com>
To:        Josh Hansard <kf@linuxpower.net>
Cc:        freebsd-mobile@FreeBSD.ORG
Subject:   Re: Question
Message-ID:  <Pine.BSF.3.96.990628125741.247A-100000@localhost>
In-Reply-To: <199906251448.KAA11945@smtp3.mindspring.com>

next in thread | previous in thread | raw e-mail | index | archive | help
> I was just wondering if anyone has ever used a Hayes Optima 56k PC Card
> modem on a Notebook running FreeBSD. Is there anything extra that you hav=
e
> to do to set it up besides the normal PAO setup?
>=20
I'd like to comapare notes on this too, as I have one working under=20
3.2-STABLE, but I don't think it's working right. My /etc/pccard.conf
looks like:
---------------------------------
#!/bin/sh
io=090x240-0x360
irq=095 10 11 13 15
memory=090xd4000 96k

card "HAYES" "OPTIMA 56K PC CARD"
=09config=090x17 "sio1" 10
=09reset 5000
---------------------------------

Without the "reset 5000", I get the message:"sio1: type 16550A with a
bogus IIR_TXRDY register. With the reset line, it _does_ work, but goes
catatonic after a period of inactivity. Could anybody provide any
insight into this (pccardc dumpcis below)?

Thanks!

Andre

-----------------------------------------------------------------------
Configuration data for card in slot 0
Tuple #1, code =3D 0x1 (Common memory descriptor), length =3D 2
    000:  00 ff
=09Common memory device information:
=09=09Device number 1, type No device, WPS =3D OFF
=09=09Speed =3D No speed, Memory block size =3D reserved, 32 units
Tuple #2, code =3D 0x15 (Version 1 info), length =3D 28
    000:  04 01 48 41 59 45 53 00 4f 50 54 49 4d 41 20 35
    010:  36 4b 20 50 43 20 43 41 52 44 00 ff
=09Version =3D 4.1, Manuf =3D [HAYES],card vers =3D [OPTIMA 56K PC CARD]
=09Addit. info =3D [=FF],[]
Tuple #3, code =3D 0x20 (Manufacturer ID), length =3D 4
    000:  00 02 10 47
=09PCMCIA ID =3D 0x200, OEM ID =3D 0x4710
Tuple #4, code =3D 0x21 (Functional ID), length =3D 2
    000:  02 00
=09Serial port/modem
Tuple #5, code =3D 0x22 (Functional EXT), length =3D 4
    000:  00 02 0f 5c
=09Serial interface extension:
=09=0916550 UART, Parity - Space,Mark,Odd,Even,
Tuple #6, code =3D 0x22 (Functional EXT), length =3D 9
    000:  05 1f 1f 00 04 00 00 04 00
=09Modem interface capabilities:
Tuple #7, code =3D 0x22 (Functional EXT), length =3D 9
    000:  06 1f 1f 00 04 00 00 04 00
=09Modem interface capabilities:
Tuple #8, code =3D 0x22 (Functional EXT), length =3D 12
    000:  02 06 00 3f 1c 03 03 0f 07 00 01 b5
=09Data modem services available:
Tuple #9, code =3D 0x22 (Functional EXT), length =3D 8
    000:  13 06 00 1f 00 02 00 b5
Tuple #10, code =3D 0x22 (Functional EXT), length =3D 8
    000:  23 06 00 1f 00 02 00 b5
Tuple #11, code =3D 0x1a (Configuration map), length =3D 5
    000:  01 27 80 ff 67
=09Reg len =3D 2, config register addr =3D 0xff80, last config =3D 0x27
=09Registers: XXX--XX-=20
Tuple #12, code =3D 0x1b (Configuration entry), length =3D 19
    000:  cf 41 99 79 55 3d 86 46 26 4c aa 60 f8 03 07 f0
    010:  bc 86 28
=09Config index =3D 0xf(default)
=09Interface byte =3D 0x41 (I/O)  +RDY/-BSY active
=09Vcc pwr:
=09=09Nominal operating supply voltage: 5 x 1V
=09=09Continuous supply current: 3.5 x 10mA
=09=09Max current average over 1 second: 1 x 100mA, ext =3D 0x46
=09=09Max current average over 10 ms: 2 x 100mA
=09=09Power down supply current: 4.5 x 1mA
=09Card decodes 10 address lines, 8 Bit I/O only
=09=09I/O address # 1: block start =3D 0x3f8 block length =3D 0x8
=09=09IRQ modes: Level, Pulse, Shared
=09=09IRQs:  4 5 6 7 10 11 12 13 15
=09Max twin cards =3D 0
=09Misc attr: (Audio-BVD2) (Power down supported)
Tuple #13, code =3D 0x1b (Configuration entry), length =3D 7
    000:  17 08 aa 60 f8 02 07
=09Config index =3D 0x17
=09Card decodes 10 address lines, 8 Bit I/O only
=09=09I/O address # 1: block start =3D 0x2f8 block length =3D 0x8
Tuple #14, code =3D 0x1b (Configuration entry), length =3D 7
    000:  1f 08 aa 60 e8 03 07
=09Config index =3D 0x1f
=09Card decodes 10 address lines, 8 Bit I/O only
=09=09I/O address # 1: block start =3D 0x3e8 block length =3D 0x8
Tuple #15, code =3D 0x1b (Configuration entry), length =3D 7
    000:  27 08 aa 60 e8 02 07
=09Config index =3D 0x27
=09Card decodes 10 address lines, 8 Bit I/O only
=09=09I/O address # 1: block start =3D 0x2e8 block length =3D 0x8
Tuple #16, code =3D 0xff (Terminator), length =3D 1
    000:  ff
2 slots found






To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.990628125741.247A-100000>