Date: Wed, 11 Aug 1999 20:51:38 -0700 (MST) From: kf7nn1@cybertrails.com To: cjclark@home.com Cc: questions@FreeBSD.ORG, vagner@WWW.TIMANDPATRICK.COM Subject: Re: cdrecord help Message-ID: <XFMail.990811205138.kf7nn1@cybertrails.com> In-Reply-To: <199908120321.XAA11537@cc942873-a.ewndsr1.nj.home.com>
next in thread | previous in thread | raw e-mail | index | archive | help
well here is my output although i dont know if the errors are due to the dummy write or not. This is with a blank cd-r in the drive that i have done nothing with, and was wondering do i need to put a filesystem on it or something first or can i just write it raw from another cd-rom? mutsgo# cdrecord -dummy -data -speed=6 dev=0,3,0 /dev/rwdc0c cdrecord: No such file or directory. No read access for '/dev/rwdc0c'. mutsgo# cdrecord -dummy -data -speed=6 dev=0,3,0 /dev/rwcd0c Cdrecord release 1.8a22 Copyright (C) 1995-1999 Jörg Schilling cdrecord: No such file or directory. WARNING: RR-scheduler not available, disab ing. scsidev: '0,3,0' scsibus: 0 target: 3 lun: 0 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : SYNC Vendor_info : 'YAMAHA ' Identifikation : 'CRW6416S ' Revision : '1.0b' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO cdrecord: WARNING: Track size unknown. Data may not fit on disk. cdrecord: Undefined error: 0. WARNING: RR-scheduler not available, disabling. Starting to write CD/DVD at speed 6 in dummy mode for single session. Last chance to quit, starting dummy write in 1 seconds. cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 10 B6 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00 00 00 00 00 00 00 0 08 00 00 00 00 00 00 08 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 2.263s timeout 40s write track data: error after 8761344 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 mutsgo# On 12-Aug-99 Crist J. Clark wrote: > vagner@WWW.TIMANDPATRICK.COM wrote, >> I just installed a Yamaha 6416S on my 3.2-stable system >> and need some help with the commands to write a cd-r. >> >> The reason I ask is because the man page for cdrecord >> reads like I know all about these cd recorders when I dont >> cause i just got it. >> >> I have an atapi cd-rom at wdc1 (secondary slave) >> and the scsi cd-rw at ID3 scsibus 0. >> >> Installed is cdrecord, mkisofs and cd-write. >> >> What would I type in to make a duplicate of the >> cdrom in the wdc1 drive on the scsi cd0 drive (yamaha)? >> >> I dont want to waste a bunch of cd-r's trying to >> figure out the commands! this is another reason I ask first... > > See the -dummy flag for how to test a command line without actually > burning the CD. > >> I am almost brave enough to try >> cdrecord dev= /dev/wcd0c:0,cd0,0 > > To copy straight from one CD to another, I would try, > ># cdrecord -data -speed=<whatever> dev=0,3,0 /dev/rwdc0c > > As mentioned above, to test this, > ># cdrecord -dummy -data -speed=<whatever> dev=0,3,0 /dev/rwdc0c > > HTH. > -- > Crist J. Clark cjclark@home.com ---------------------------------- E-Mail: kf7nn1@cybertrails.com or kf7nn@kf7nn.com Date: 11-Aug-99 Time: 20:45:18 Great minds run in great circles. This message was sent using FreeBSD Unix. ---------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.990811205138.kf7nn1>