Date: Thu, 6 Feb 2025 18:34:13 +0100 From: Tomek CEDRO <tomek@cedro.info> To: Mark Millard <marklmi@yahoo.com> Cc: Mario Marietto <marietto2008@gmail.com>, Marco Devesas Campos <devesas.campos@gmail.com>, freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: Raimbow screen installing / booting FreeBSD-14.2-RELEASE-arm64-aarch64-RPI.img on the raspberry pi zero 2w Message-ID: <CAFYkXjmw8odDrJQvnjcyE4nN4NgqZdGDxi4pOsRGTcz8hQspSA@mail.gmail.com> In-Reply-To: <1EC055A5-EA4C-4857-BFC6-9C0C29573ED2@yahoo.com> References: <CA%2B1FSig9coHK-k1dNaong=rOSGGNW170gf%2B-13S7J3syORU_DA@mail.gmail.com> <5E12B96C-20A2-4FFB-A31E-00B259450707@gmail.com> <CA%2B1FSih6jzcy7po3Ux_nSfN6UF%2BzwBfp-iM1vzVgpPObnN3ukA@mail.gmail.com> <CA%2B1FSih9TauSj4YteGij2BFO7C4irxDE=RFoBtnKK6-EMzwV5Q@mail.gmail.com> <FEDBC538-E7B2-49CA-AD27-3641A1BF6E56@gmail.com> <D1B3EA48-16B7-4E9A-940E-A88B0E75F1DA@yahoo.com> <CA%2B1FSijy9OSoaMi%2BLfeiD4zqj=_0OkYcM3OrMEwGZqxrV7X4pg@mail.gmail.com> <E9F79146-A973-4AC0-BFFB-28EF15FF9AE7@yahoo.com> <CAFYkXjkdaD8n6rYUrv0kdMwXkqA%2BENu0FAP-n8d7fydRKzwaYw@mail.gmail.com> <1EC055A5-EA4C-4857-BFC6-9C0C29573ED2@yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Feb 6, 2025 at 3:04=E2=80=AFPM Mark Millard <marklmi@yahoo.com> wro=
te:
> On Feb 5, 2025, at 23:51, Tomek CEDRO <tomek@cedro.info> wrote:
> > Yup, I can confirm rpi-firmware/bcm2710-rpi-zero-2-w.dtb works with
> > FreeBSD-14.2-RELEASE-arm64-aarch64-RPI.img :-)
>
> FreeBSD-14.2-RELEASE-arm64-aarch64-RPI.img contains the
> u-boot from:
>
> /usr/ports/sysutils/u-boot-rpi-arm64
>
> and, so, also contains and should be used with a copy of:
>
> /usr/local/share/rpi-firmware/config_arm64.txt
>
> as config.txt :
>
> # grep -rA1 config_arm64 /usr/src/release/
> /usr/src/release/arm64/RPI.conf: chroot ${CHROOTDIR} cp -p ${DTB_DIR}/con=
fig_arm64.txt \
> /usr/src/release/arm64/RPI.conf- ${FATMOUNT}/config.txt
>
> /usr/local/share/rpi-firmware/config_rpi3.txt is for when:
>
> /usr/ports/sysutils/u-boot-rpi3
>
> is is use instead. No modern snapshot or release uses that:
>
> > One thing to mention too is config_rpi3.txt -> config.txt (not
> > config_rpi_0_w.txt) :-)
>
> config_rpi3.txt is likely not fully appropriate and
> config_arm64.txt is likely what should be used. But
> it was already in place as config.txt in:
>
> FreeBSD-14.2-RELEASE-arm64-aarch64-RPI.img
>
> FreeBSD-14.2-RELEASE-arm64-aarch64-RPI.img is for
> all the aarch64 / arm64 RPi*'s that FreeBSD happens
> to support. (RPi5's not being supported as stands.)
ACK! I confirm that config_arm64.txt -> config.txt works on rPI-0-2W
and should remember its the default :-)
% diff -u config_rpi3.txt config_arm64.txt
--- config_rpi3.txt 2025-02-06 08:21:34.000000000 +0100
+++ config_arm64.txt 2025-02-06 08:21:34.000000000 +0100
@@ -1,7 +1,11 @@
+[all]
arm_64bit=3D1
dtparam=3Daudio=3Don,i2c_arm=3Don,spi=3Don
dtoverlay=3Dmmc
-dtoverlay=3Dpwm
dtoverlay=3Ddisable-bt
device_tree_address=3D0x4000
kernel=3Du-boot.bin
+
+[pi4]
+hdmi_safe=3D1
+armstub=3Darmstub8-gic.bin
Thank you Mark! :-)
Tomek
ps/2: Is there a video console so I can for instance run mpv / sdl2
applications without xorg / wayland as on amd64? What driver? :-)
--=20
CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAFYkXjmw8odDrJQvnjcyE4nN4NgqZdGDxi4pOsRGTcz8hQspSA>