Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 6 Mar 2000 07:30:03 +0000
From:      Mark Ovens <mark@ukug.uk.freebsd.org>
To:        Michael Lewis <m1ewis@hotmail.com>
Cc:        kkeysler@nwlink.com, freebsd-questions@freebsd.org
Subject:   Re: ppp -- terminal mode problem
Message-ID:  <20000306073003.B3134@parish>
In-Reply-To: <20000306055739.30482.qmail@hotmail.com>; from m1ewis@hotmail.com on Sun, Mar 05, 2000 at 09:57:39PM -0800
References:  <20000306055739.30482.qmail@hotmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Mar 05, 2000 at 09:57:39PM -0800, Michael Lewis wrote:
> >
> >Normally there is no prompt. Just the cursor.
> 
> There's no cursor either, just nothing.
> >
> 
> >If you are not seeing any characters on the screen, it may be due to the
> >fact that your modem is not set to echo commands. You'll have to consult
> >your modems command set for the proper command to set echo on. Another
> >possibility is that the modem is no on sio1. If it's an internal PNP, it
> >may not be configured properly. In other words, the sio devices
> >shown in dmesg are just the com ports. On my box, with a supraexpress
> >isa pnp, the modem is on sio2. If it's external, check to be sure you
> >are connected to the proper com port.
> >
> 
> I'll check into commands that control setting echo on.  The modem is an 
> internal ISA but not PnP.  I set the modem's jumpers to use COM2 and int 03, 
> which should evaluate to cuaa1 in FreeBSD.  But is it really using cuaa1?  
> There's no evidence it is.
> 

Ah! you didn't say that before in out earlier discussion(s)!. If your
modem is internal and you've jumpered it for "COM2" have you disabled
the *real* "COM2", i.e. the second serial port (via the BIOS) on your
mobo? If not then it is probably that which is being found.

Alternatively, you could try jumpering you modem as "COM3", IRQ5 0x3e8
and re-booting (you'll probably have to do ``boot -c'' and enable sio2
as it's disabled by default).

When you've tried that, post he entire output of dmesg(8).

HTH

> >Someone else may have a better idea...these are the problems I've
> >encountered.
> >
> 
> thanks for your reply, I'll figure it out eventually...
> ML
> 
> >E=mc^2
> >student 1 each     Ken Keeler
> >"The Internet, is that thing still around?" - Homer J. Simpson
> >
> 
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
> 
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message

-- 
	Microsoft: Where do you want to go today?
	Linux:     Where do you want to go tomorrow?
	BSD:       Are you guys coming, or what?
			              -Poster at LinuxWorld 2000
________________________________________________________________
      FreeBSD - The Power To Serve http://www.freebsd.org
      My Webpage http://ukug.uk.freebsd.org/~mark/
mailto:mark@ukug.uk.freebsd.org             http://www.radan.com



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000306073003.B3134>