Date: Mon, 05 Feb 2001 19:23:46 -0800 From: Charlie Root <hweaver@pinetel.com> To: Brian Somers <brian@Awfulhak.org> Cc: mobile@FreeBSD.ORG Subject: Re: PPP problem: PCMCIA modem on ThinkPad Message-ID: <3A7F6E42.198844D5@pinetel.com> References: <200102052245.f15MjTQ06134@hak.lan.Awfulhak.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Sorry, Brian, but I should have said that log was created by running a standard example ppp.conf script. Worse than that, I just copied part of the ppp.log into the email. I did not think to send the portion of the ppp.log that represented my successful session. In that session I did as you implied: set device ... set dial ... at ... atdt######## ... username ... password. But running a standard script, e.g. 'dial demand' wouldn't work. This install shares the hard drive with Win98. Perhaps that had something to do with it. I've since done an install of the same release, 4.2, on another removable hard drive inserted into the same bay in the same machine wherein FreeBSD has it all to itself. A result of that is I have a functional connection and am writing to you from that system. The ppp.conf script that I invoked was the sample that came with the the installation. All I did was give the command: 'dial papchap'. Well ... ok, I entered the correct dialer, cuaa4, and my ISP's phone #, my username, and password into the script. I'll try to get you a copy of that failed ppp session's log shortly, but I'm working on this other hard drive just now. Thanks. Hal Brian Somers wrote: > I don't see your modem conversation in the log. If you didn't > do the AT bit after running ``term'' (you must have right ? Otherwise > you'd have a ``set dial'' somewhere in the log ?), then that'd be the > problem - when you drop into terminal mode, you're expected to do the > dial & login bits. > > Does your card respond to AT after you type ``term'' ? If so, ppp's > talking to the device ok. > > > I'm using a rather new PCMCIA modem on a Thinkpad 760ED. PPP doesn't work > > with the /etc/pccard.conf I'm using, but tip works ok -- I can login to my > > IP with it.. > > > > /var/log/ppp.log says something about "/dev/cuaa4 doesn't support CD " > > > > Below are some relevant portions from /var/log/ppp.log, pccardc, and > > /etc/pccard.conf. > > > > TIA > > > > Hal > > > > ================ > > from /var/log/ppp.log > > ================ > > . > > . > > . > > Jan 26 15:52:08 pdx ppp[207]: Phase: Using interface: tun0 > > Jan 26 15:52:08 pdx ppp[207]: Phase: deflink: Created in closed state > > Jan 26 15:52:08 pdx ppp[207]: tun0: Command: default: set device /dev/cuaa4 > > Jan 26 15:52:08 pdx ppp[207]: tun0: Command: default: set speed 115200 > > Jan 26 15:52:08 pdx ppp[207]: tun0: Phase: PPP Started (interactive mode). > > Jan 26 15:52:15 pdx ppp[207]: tun0: Command: /dev/tty: t > > Jan 26 15:52:15 pdx ppp[207]: tun0: Phase: bundle: Establish > > Jan 26 15:52:15 pdx ppp[207]: tun0: Phase: deflink: closed -> opening > > Jan 26 15:52:17 pdx ppp[207]: tun0: Phase: deflink: Connected! > > Jan 26 15:52:17 pdx ppp[207]: tun0: Phase: deflink: opening -> carrier > > Jan 26 15:52:18 pdx ppp[207]: tun0: Phase: deflink: /dev/cuaa4 doesn't > > support CD > > Jan 26 15:52:18 pdx ppp[207]: tun0: Phase: deflink: carrier -> ready > > Jan 26 15:55:11 pdx ppp[207]: tun0: Command: /dev/tty: dial > > PAPorCHAPpmdemand > > Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set phone > > 8936990 > > Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set login > > Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set authname > > hweaverP > > Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set authkey > > ******** > > Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set timeout > > 120 > > Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set ifaddr > > 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > > Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: add default > > HISADDR > > Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: enable dns > > Jan 26 15:55:11 pdx ppp[207]: tun0: Phase: deflink: ready -> carrier > > Jan 26 15:55:11 pdx ppp[207]: tun0: Phase: deflink: carrier -> lcp > > Jan 26 15:55:11 pdx ppp[207]: tun0: LCP: FSM: Using "deflink" as a transport > > Jan 26 15:55:11 pdx ppp[207]: tun0: LCP: deflink: State change Initial --> > > Closed > > Jan 26 15:55:11 pdx ppp[207]: tun0: LCP: deflink: State change Closed --> > > Stopped > > . > > . > > . > [.....] > -- > Brian <brian@Awfulhak.org> <brian@[uk.]FreeBSD.org> > <http://www.Awfulhak.org>; <brian@[uk.]OpenBSD.org> > Don't _EVER_ lose your sense of humour ! > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A7F6E42.198844D5>