Date: Fri, 17 Aug 2001 11:05:03 -0700 From: Ted Faber <faber@ISI.EDU> To: Warner Losh <imp@harmony.village.org> Cc: mobile@FreeBSD.ORG Subject: Re: HEADS UP: pcic pci attachments merged from current Message-ID: <20010817110502.G621@ted.isi.edu> In-Reply-To: <20010817100113.F621@ted.isi.edu>; from faber@ISI.EDU on Fri, Aug 17, 2001 at 10:01:13AM -0700 References: <200108150433.f7F4X1W20487@harmony.village.org> <200108161636.f7GGabV27366@zibbi.icomtek.csir.co.za> <20010816153437.E30807@ted.isi.edu> <200108170009.f7H09NW36246@harmony.village.org> <20010816171237.G30807@ted.isi.edu> <200108170017.f7H0HVW36412@harmony.village.org> <20010816174215.H30807@ted.isi.edu> <20010817094351.D621@ted.isi.edu> <200108171648.f7HGm9W43044@harmony.village.org> <20010817100113.F621@ted.isi.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
--gTtJ75FAzB1T2CN6 Content-Type: multipart/mixed; boundary="+1TulI7fc0PCHNy3" Content-Disposition: inline --+1TulI7fc0PCHNy3 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Fri, Aug 17, 2001 at 10:01:13AM -0700, Ted Faber wrote: > On Fri, Aug 17, 2001 at 10:48:09AM -0600, Warner Losh wrote: > > In message <20010817094351.D621@ted.isi.edu> Ted Faber writes: > > : FYI, I tried the patches at > > : http://people.freebsd.org/~imp/no-hang.diff.4 , set the > > : hw.pic.ignore_pcibios variable and still had no luck. I wedged the > > > > pic? That should be "pci". Did the dmesg tell you that it wasn't > > using pci bios? I get > > > > PCI code ignoring PCIbios entry > > > > in my dmesg when I have it turned on. > > My typo in the mail. I typed pci here and confirmed its value in the > loader before letting the boot go. > > But looking at the logs, I don't see your message. I'll try it again > and confirm the message in the dmesg before plugging in the card. Confirmed, the message appears in the dmesg and the card is still allocated irq 9. Are there BIOS settings I should be worried about at all (Pnp Bios or something)? Here's the dmesg. > > : (In case this doesn't thread properly, I'm the fellow with the Fujitsu > > : C-5130 lifebook whose ethernet is getting assigned irq 9 instead of > > : some useful value which is wedging the machine.) --+1TulI7fc0PCHNy3 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-RC #31: Fri Aug 17 09:59:13 PDT 2001 root@arvon.lunabase.org:/usr/src/sys/compile/ARVON Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (398.20-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 67022848 (65452K bytes) avail memory = 61886464 (60436K bytes) Preloaded elf kernel "kernel" at 0xc035d000. Preloaded elf module "vesa.ko" at 0xc035d09c. Preloaded elf module "snd_ds1.ko" at 0xc035d138. Preloaded elf module "snd_pcm.ko" at 0xc035d1d8. Preloaded elf module "usb.ko" at 0xc035d278. Preloaded elf module "ugen.ko" at 0xc035d314. module_register_init: MOD_LOAD (vesa, c0312d04, 0) error 6 Pentium Pro MTRR support enabled PCI code ignoring PCIbios entry Using $PIR table, 6 entries at 0xc00fdf60 apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 9 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf090-0xf09f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xf0a0-0xf0bf irq 9 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0xff80-0xff8f at device 7.3 on pci0 pcm0: <Yamaha DS-1E (YMF744)> port 0xf08c-0xf08f,0xf0c0-0xf0ff mem 0xfedf8000-0xfedfffff irq 9 at device 13.0 on pci0 pci0: <unknown card> (vendor=0x11c1, dev=0x044a) at 16.0 irq 9 pcic0: <TI PCI-1225 PCI-CardBus Bridge> irq 9 at device 19.0 on pci0 pcic0: PCI Memory allocated: 0x44000000 pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][pci only] pccard0: <PC Card bus (classic)> on pcic0 pcic1: <TI PCI-1225 PCI-CardBus Bridge> irq 9 at device 19.1 on pci0 pcic1: PCI Memory allocated: 0x44001000 pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][pci only] pccard1: <PC Card bus (classic)> on pcic1 orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pps0: <Pulse per second Timing Interface> on ppbus0 pcic1: Event mask 0xf IPsec: Initialized Security Association Processing. pcic1: debounced state is 0x30000116 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ad0: 6194MB <FUJITSU MHE2064AT> [13424/15/63] at ata0-master UDMA33 acd0: CDROM <NEC CD-ROM DRIVE:282> at ata1-master using PIO4 Mounting root from ufs:/dev/ad0s1a pcic1: Event mask 0x4 pcic1: Event mask 0x4 pcic1: Event mask 0x6 pcic1: debounced state is 0x30000510 pccard: card inserted, slot 1 pcic1: Event mask 0x9 ed0 at port 0x300-0x31f irq 9 slot 1 on pccard1 ed0: address 00:e0:98:7c:fb:21, type Linksys (16 bit) lxtphy0: <LXT970 10/100 media interface> on miibus0 lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled pcic1: Event mask 0x6 pcic1: Event mask 0x4 pcic1: Event mask 0x4 pcic1: debounced state is 0x30000186 lxtphy0: detached miibus0: detached ed0: detached pccard: card removed, slot 1 --+1TulI7fc0PCHNy3-- --gTtJ75FAzB1T2CN6 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE7fVzOaUz3f+Zf+XsRAkV2AKCYej1tA+LhJ8RtBK+VTvCPkVarawCdGREY 59xgdaJ9fuLZFE4JRuzBDXk= =CXZd -----END PGP SIGNATURE----- --gTtJ75FAzB1T2CN6-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010817110502.G621>