Date: Tue, 11 Sep 2001 20:59:22 -0500 From: "David W. Chapman Jr." <dwcjr@inethouston.net> To: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp> Cc: "David W. Chapman Jr." <dwcjr@inethouston.net>, current@freebsd.org Subject: Re: ps/2 mouse problems [boot -v messages] Message-ID: <20010911205922.A33545@leviathan.inethouston.net> In-Reply-To: <200109120157.KAA18565@zodiac.mech.utsunomiya-u.ac.jp> References: <20010911175808.A27841@leviathan.inethouston.net> <200109120157.KAA18565@zodiac.mech.utsunomiya-u.ac.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
--9amGYk9869ThD9tj
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Wed, Sep 12, 2001 at 10:57:31AM +0900, Kazutaka YOKOTA wrote:
> Please send ENTIRE output, if possilbe, rather than partial exerpt.
> Also send "boot -v" output when the acpi module is not loaded.
> Please also tell which motherboard you have.
> It would be also useful to dump ACPI data blocks using acpidump(8).
>
I have a Gigabyte 7ZX with the FD revision of the bios(latest so far)
--
David W. Chapman Jr.
dwcjr@inethouston.net Raintree Network Services, Inc. <www.inethouston.net>
dwcjr@freebsd.org FreeBSD Committer <www.FreeBSD.org>
--9amGYk9869ThD9tj
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="acpi.dump"
RSD PTR: Checksum=156, OEMID=AMI, RsdtAddress=0x0fff0000
RSDT: Lenth=40, Revision=1, Checksum=184,
OEMID=AMIINT, OEM Table ID=, OEM Revision=0x11,
Creator ID=MSFT, Creator Revision=0x97
Entries={ 0x0fff0030 }
DSDT=0xfff00b0
INT_MODEL=PIC
SCI_INT=11
SMI_CMD=0x82f, ACPI_ENABLE=0xe1, ACPI_DISABLE=0x1e, S4BIOS_REQ=0x1f
PM1a_EVT_BLK=0x800-0x803
PM1a_CNT_BLK=0x804-0x805
PM2_TMR_BLK=0x808-0x80b
PM2_GPE0_BLK=0x820-0x823
P_LVL2_LAT=101ms, P_LVL3_LAT=1001ms
FLUSH_SIZE=1024, FLUSH_STRIDE=16
DUTY_OFFSET=0, DUTY_WIDTH=0
DAY_ALRM=125, MON_ALRM=126, CENTURY=50
Flags={WBINVD,PROC_C1,SLP_BUTTON,RTC_S4}
DSDT: Lenth=10878, Revision=1, Checksum=118,
OEMID=VIA, OEM Table ID=VT8371, OEM Revision=0x1000,
Creator ID=MSFT, Creator Revision=0x100000b
Scope(\_PR_) {
Processor(CPU1, 1, 0x0, 0x0) {
}
}
OperationRegion(CS72, SystemIO, 0x72, 0x2)
Field(CS72, ByteAcc, NoLock, Preserve) {
CI72, 8,
CO73, 8
}
Name(\_S0_, Package(0x4) {
0x0,
0x0,
0x0,
0x0,
})
Name(\_S1_, Package(0x4) {
0x4,
0x0,
0x0,
0x0,
})
Name(\_S4_, Package(0x4) {
0x2,
0x0,
0x0,
0x0,
})
Name(\_S5_, Package(0x4) {
0x2,
0x0,
0x0,
0x0,
})
Method(MCTH, 2) {
If(LLess(Sizeof(Arg0), Sizeof(Arg1))) {
Return(0x0)
}
Add(Sizeof(Arg0), 0x1, Local0)
Name(BUF0, Buffer(Local0) { })
Name(BUF1, Buffer(Local0) { })
Store(Arg0, BUF0)
Store(Arg1, BUF1)
While(Local0) {
Decrement(Local0)
If(LEqual(DerefOf(Index(BUF0, Local0, )), DerefOf(Index(BUF1, Local0, )))) {
}
Else {
Return(Zero)
}
}
Return(One)
}
Scope(\_SB_) {
Name(APIC, 0x0)
Method(_PIC, 1) {
Store(Arg0, APIC)
}
Device(PWRB) {
Name(_HID, 0x0c0cd041)
Method(_STA) {
Return(0xb)
}
}
Device(PCI0) {
Name(_HID, 0x030ad041)
Name(_ADR, 0x0)
Name(_BBN, 0x0)
Name(SS3D, 0x2)
Name(CRS_, Buffer(0x88) {0x88, 0xd, 0x0, 0x2, 0xc, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x1, 0x47, 0x1, 0xf8, 0xc, 0xf8, 0xc, 0x1, 0x8, 0x88, 0xd, 0x0, 0x1, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0xf7, 0xc, 0x0, 0x0, 0xf8, 0xc, 0x88, 0xd, 0x0, 0x1, 0xc, 0x3, 0x0, 0x0, 0x0, 0xd, 0xff, 0xff, 0x0, 0x0, 0x0, 0xf3, 0x87, 0x17, 0x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xa, 0x0, 0xff, 0xff, 0xb, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x2, 0x0, 0x87, 0x17, 0x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xc, 0x0, 0xff, 0xff, 0xd, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x2, 0x0, 0x87, 0x17, 0x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x20, 0xff, 0xff, 0xdf, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xe0, 0xdf, 0x79, 0x0 })
OperationRegion(TMEM, PCI_Config, 0x57, 0x1)
Field(TMEM, ByteAcc, NoLock, Preserve) {
MEMT, 8
}
Name(TOM_, 0x0)
Method(MDET) {
If(TOM_) {
}
Else {
If(FLAG) {
ShiftLeft(MEMT, 0x18, TOM_)
}
Else {
Return(0x20000000)
}
}
Return(TOM_)
}
Method(TFCS) {
Subtract(MDET, 0x7fc0, Local0)
Return(Local0)
}
Name(FLAG, 0x1)
Name(OSFL, 0x1)
Method(_INI) {
\_SB_.PCI0.SBRG.IODT
If(MCTH) {
\_OS_
"Microsoft Windows"
}
Else {
If(MCTH) {
\_OS_
"Microsoft WindowsME: Millennium Edition"
}
Else {
Store(0x0, OSFL)
}
}
}
Method(_REG, 2) {
If(LEqual(Arg0, 0x2)) {
Store(Arg1, FLAG)
}
}
Method(_CRS) {
CreateDWordField(CRS_, 0x76, TMEM)
CreateDWordField(CRS_, 0x82, TLEN)
Store(MDET, TMEM)
Subtract(0xffe00000, TMEM, TLEN)
Return(CRS_)
}
Name(_PRT, Package(0x1e) {
Package(0x4) {
0x0007ffff,
0x2,
\_SB_.LNKC,
0x0,
},
Package(0x4) {
0x0007ffff,
0x3,
\_SB_.LNKD,
0x0,
},
Package(0x4) {
0x0009ffff,
0x0,
\_SB_.LNKB,
0x0,
},
Package(0x4) {
0x0009ffff,
0x1,
\_SB_.LNKC,
0x0,
},
Package(0x4) {
0x0009ffff,
0x2,
\_SB_.LNKD,
0x0,
},
Package(0x4) {
0x0009ffff,
0x3,
\_SB_.LNKA,
0x0,
},
Package(0x4) {
0x000affff,
0x0,
\_SB_.LNKC,
0x0,
},
Package(0x4) {
0x000affff,
0x1,
\_SB_.LNKD,
0x0,
},
Package(0x4) {
0x000affff,
0x2,
\_SB_.LNKA,
0x0,
},
Package(0x4) {
0x000affff,
0x3,
\_SB_.LNKB,
0x0,
},
Package(0x4) {
0x000fffff,
0x0,
\_SB_.LNKD,
0x0,
},
Package(0x4) {
0x000fffff,
0x1,
\_SB_.LNKA,
0x0,
},
Package(0x4) {
0x000fffff,
0x2,
\_SB_.LNKB,
0x0,
},
Package(0x4) {
0x000fffff,
0x3,
\_SB_.LNKC,
0x0,
},
Package(0x4) {
0x000cffff,
0x0,
\_SB_.LNKA,
0x0,
},
Package(0x4) {
0x000cffff,
0x1,
\_SB_.LNKB,
0x0,
},
Package(0x4) {
0x000cffff,
0x2,
\_SB_.LNKC,
0x0,
},
Package(0x4) {
0x000cffff,
0x3,
\_SB_.LNKD,
0x0,
},
Package(0x4) {
0x000dffff,
0x0,
\_SB_.LNKB,
0x0,
},
Package(0x4) {
0x000dffff,
0x1,
\_SB_.LNKC,
0x0,
},
Package(0x4) {
0x000dffff,
0x2,
\_SB_.LNKD,
0x0,
},
Package(0x4) {
0x000dffff,
0x3,
\_SB_.LNKA,
0x0,
},
Package(0x4) {
0x0011ffff,
0x0,
\_SB_.LNKC,
0x0,
},
Package(0x4) {
0x0011ffff,
0x1,
\_SB_.LNKD,
0x0,
},
Package(0x4) {
0x0011ffff,
0x2,
\_SB_.LNKA,
0x0,
},
Package(0x4) {
0x0011ffff,
0x3,
\_SB_.LNKB,
0x0,
},
Package(0x4) {
0x0001ffff,
0x0,
\_SB_.LNKA,
0x0,
},
Package(0x4) {
0x0001ffff,
0x1,
\_SB_.LNKB,
0x0,
},
Package(0x4) {
0x000effff,
0x0,
\_SB_.LNKC,
0x0,
},
Package(0x4) {
0x0010ffff,
0x0,
\_SB_.LNKD,
0x0,
},
})
Device(SBRG) {
Name(_ADR, 0x00070000)
Name(\_SB_.IPRS, Buffer(0x8) {0x30, 0x23, 0xf8, 0xde, 0x18, 0x38, 0x79, 0x0 })
OperationRegion(PIX0, PCI_Config, 0x55, 0x4)
OperationRegion(PIX1, PCI_Config, 0x85, 0x1)
OperationRegion(PIX2, PCI_Config, 0x50, 0x3)
OperationRegion(PIX3, PCI_Config, 0x8, 0x1)
Scope(\_SB_) {
Field(
--9amGYk9869ThD9tj
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="boot.acpi"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #4: Sun Sep 9 21:06:32 GMT 2001
poseiden@dwcjr.inethouston.net:/usr/obj/usr/src/sys/DWCJR
Calibrating clock(s) ... TSC clock: 1102174905 Hz, i8254 clock: 1192830 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 1102506786 Hz
CPU: AMD Athlon(tm) Processor (1102.51-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 268369920 (262080K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00437000 - 0x0ffe7fff, 263917568 bytes (64433 pages)
avail memory = 257085440 (251060K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fdb40
bios32: Entry = 0xfdb50 (c00fdb50) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdb71
pnpbios: Found PnP BIOS data at 0xc00f7250
pnpbios: Entry = f0000:6144 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc0411000.
Preloaded elf module "cd9660.ko" at 0xc04110a8.
Preloaded elf module "msdosfs.ko" at 0xc0411148.
Preloaded elf module "procfs.ko" at 0xc04111e8.
Preloaded elf module "linux.ko" at 0xc0411288.
Preloaded elf module "sysvshm.ko" at 0xc0411328.
Preloaded elf module "sysvsem.ko" at 0xc04113c8.
Preloaded elf module "sysvmsg.ko" at 0xc0411468.
Preloaded elf module "if_xl.ko" at 0xc0411508.
Preloaded elf module "miibus.ko" at 0xc04115a8.
Preloaded elf module "snd_es137x.ko" at 0xc0411648.
Preloaded elf module "snd_pcm.ko" at 0xc04116ec.
Preloaded elf module "usb.ko" at 0xc041178c.
Preloaded elf module "ugen.ko" at 0xc0411828.
Preloaded elf module "bktr.ko" at 0xc04118c4.
Preloaded elf module "bktr_mem.ko" at 0xc0411960.
Preloaded elf module "agp.ko" at 0xc0411a00.
Preloaded elf module "random.ko" at 0xc0411a9c.
Preloaded elf module "atspeaker.ko" at 0xc0411b3c.
Preloaded elf module "joy.ko" at 0xc0411be0.
Preloaded elf module "fdc.ko" at 0xc0411c7c.
Preloaded elf module "acpi.ko" at 0xc0411d18.
bktr_mem: memory holder loaded
random: <entropy source>
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106)
Using $PIR table, 8 entries at 0xc00f78d0
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu: CLK_VAL field overflows P_CNT register
acpi_cpu: CLK_VAL field overlaps THT_EN bit
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 27, enabled
found-> vendor=0x1106, dev=0x0305, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x8305, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x1106, dev=0x0686, revid=0x22
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x10
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d400, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x10
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d800, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x10
bus=0, slot=7, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3057, revid=0x30
bus=0, slot=7, func=4
class=0c-05-00, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000dc00, size 8, enabled
map[14]: type 1, range 32, base dffff000, size 12, enabled
found-> vendor=0x9004, dev=0x8778, revid=0x01
bus=0, slot=12, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 3, range 32, base dddfe000, size 12, enabled
found-> vendor=0x109e, dev=0x036e, revid=0x02
bus=0, slot=13, func=0
class=04-00-00, hdrtype=0x00, mfdev=1
intpin=a, irq=9
map[10]: type 3, range 32, base dddff000, size 12, enabled
found-> vendor=0x109e, dev=0x0878, revid=0x02
bus=0, slot=13, func=1
class=04-80-00, hdrtype=0x00, mfdev=1
intpin=a, irq=9
map[10]: type 4, range 32, base 0000d000, size 6, enabled
found-> vendor=0x1274, dev=0x1371, revid=0x07
bus=0, slot=14, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
powerspec 1 supports D0 D2 D3 current D0
map[10]: type 4, range 32, base 0000cc00, size 7, enabled
map[14]: type 1, range 32, base dfffef80, size 7, enabled
found-> vendor=0x10b7, dev=0x9055, revid=0x30
bus=0, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
powerspec 1 supports D0 D1 D2 D3 current D0
pci0: <PCI bus> on acpi_pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xa000-0xafff
pcib1: memory decode 0xdde00000-0xdfefffff
pcib1: prefetched decode 0xcdc00000-0xddcfffff
pci1: physical bus=1
map[10]: type 1, range 32, base de000000, size 24, enabled
map[14]: type 3, range 32, base d0000000, size 27, enabled
found-> vendor=0x10de, dev=0x0101, revid=0x10
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=03 ostat0=7f ostat2=50
ata1-master: ATAPI probe 7f 7f
ata1-slave: ATAPI probe 14 eb
ata1: mask=03 stat0=7f stat1=00
ata1-master: ATA probe 7f 7f
ata1: devices=08
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 7.4 (no driver attached)
ahc0: <Adaptec 2940 Pro Ultra SCSI adapter> port 0xdc00-0xdcff mem 0xdffff000-0xdfffffff irq 11 at device 12.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable is present, internal 68 cable not present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: 68 pin termination Enabled
ahc0: 50 pin termination Enabled
ahc0: Downloading Sequencer Program... 431 instructions downloaded
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
bktr0: <BrookTree 878> mem 0xdddfe000-0xdddfefff irq 9 at device 13.0 on pci0
brooktree0: PCI bus latency is 64.
bktr0: buffer size 3555328, addr 0x5000000
bktr0: GPIO is 0x00ffffff
bktr0: subsystem 0x1002 0x0001
bktr0: Warning - card vendor 0x1002 (model 0x0001) unknown.
bktr0: card signature: 00 00 00 00 00 00 00 00 01 00 01 00 01 00 00 00
bktr0: Detected a MSP3430G-A4 at 0x80
bktr0: Pinnacle/Miro TV, Temic NTSC tuner, msp3400c stereo.
pci0: <multimedia> at device 13.1 (no driver attached)
pcm0: <Creative CT5880-A> port 0xd000-0xd03f irq 5 at device 14.0 on pci0
pcm0: ac97 codec id 0x83847608 (SigmaTel STAC9708/9711)
pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: ac97 primary codec extended features surround DAC
pcm: setmap 52d000, 1000; 0xc1679000 -> 52d000
pcm: setmap 50f000, 1000; 0xc167b000 -> 50f000
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xdfffef80-0xdfffefff irq 10 at device 15.0 on pci0
xl0: Ethernet address: 00:50:04:b7:13:09
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
acpi_button1: <Sleep Button> on acpi0
atspeaker0 port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd1: unable to allocate IRQ
psm0: unable to allocate IRQ
fdc0: <NEC 72065B or clone> port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc1: cannot reserve I/O port range
ppc1: cannot reserve I/O port range
ata-: ata0 already exists, using ata2 instead
ata-: ata1 already exists, using ata3 instead
atkbdc-: atkbdc0 already exists, using atkbdc1 instead
fdc-: fdc0 already exists, using fdc1 instead
ppc-: ppc0 already exists, using ppc1 instead
sc-: sc0 already exists, using sc1 instead
sio-: sio0 already exists, using sio2 instead
sio-: sio1 already exists, using sio3 instead
sio-: sio2 already exists, using sio4 instead
sio-: sio3 already exists, using sio5 instead
vga-: vga0 already exists, using vga1 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xca7ff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc1: <Keyboard controller (i8042)> failed to probe at port 0x60 on isa0
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
fdc1: cannot reserve I/O port range (6 ports)
fdc1 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 on isa0
ppc1: parallel port found at 0x378
ppc1: cannot reserve I/O port range
ppc1: <Parallel port> failed to probe at port 0x378-0x37f irq 7 on isa0
sc1: no video adapter found.
sc1: <System console> failed to probe at flags 0x100 on isa0
sio2 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio3 failed to probe at port 0x2f8 irq 3 on isa0
sio4: not probed (disabled)
sio5: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
Linux ELF exec handler installed
ad0: success setting UDMA4 on VIA chip
Creating DISK ad0
ad0: <IBM-DTLA-307075/TXAOA58A> ATA-5 disk at ata0-master
ad0: 73308MB (150136560 sectors), 148945 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 32 depth queue, tagged UDMA66
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-slave: success setting PIO4 on generic chip
acd0: <ATAPI 54X CDROM/VER-1.41> CDROM drive at ata1 as slave
acd0: read 3437KB/s (32KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(ahc0:A:3:0): Sending SDTR period c, offset f
(ahc0:A:3:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
ahc0: target 3 synchronous at 10.0MHz, offset = 0xf
(ahc0:A:3:0): Sending SDTR period 19, offset f
(ahc0:A:3:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
pass0 at ahc0 bus 0 target 3 lun 0
pass0: <TEAC CD-R58S 1.0P> Removable CD-ROM SCSI-2 device
pass0: Serial Number 2J04032B
pass0: 10.000MB/s transfers (10.000MHz, offset 15)
Creating DISK cd0
Mounting root from ufs:/dev/ad0s2a
(ahc0:A:3:0): Sending SDTR period 19, offset f
(ahc0:A:3:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
(cd0:ahc0:0:3:0): error 6
(cd0:ahc0:0:3:0): Unretryable Error
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <TEAC CD-R58S 1.0P> Removable CD-ROM SCSI-2 device
cd0: Serial Number 2J04032B
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ad0s1: type 0x1c, start 63, end = 61448624, size 61448562 : OK
ad0s2: type 0xa5, start 61448625, end = 102398309, size 40949685
ad0s2: C/H/S start 1023/0/1 (16434495) != start 61448625: invalid
start_init: trying /sbin/init
pid 271 (syslogd), uid 0: exited on signal 6 (core dumped)
--9amGYk9869ThD9tj
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.nonacpi"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #4: Sun Sep 9 21:06:32 GMT 2001
poseiden@dwcjr.inethouston.net:/usr/obj/usr/src/sys/DWCJR
Calibrating clock(s) ... TSC clock: 1102211370 Hz, i8254 clock: 1192870 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 1102506233 Hz
CPU: AMD Athlon(tm) Processor (1102.51-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 268369920 (262080K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003f5000 - 0x0ffe7fff, 264187904 bytes (64499 pages)
avail memory = 257359872 (251328K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fdb40
bios32: Entry = 0xfdb50 (c00fdb50) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdb71
pnpbios: Found PnP BIOS data at 0xc00f7250
pnpbios: Entry = f0000:6144 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc03cf000.
Preloaded elf module "cd9660.ko" at 0xc03cf0a8.
Preloaded elf module "msdosfs.ko" at 0xc03cf148.
Preloaded elf module "procfs.ko" at 0xc03cf1e8.
Preloaded elf module "linux.ko" at 0xc03cf288.
Preloaded elf module "sysvshm.ko" at 0xc03cf328.
Preloaded elf module "sysvsem.ko" at 0xc03cf3c8.
Preloaded elf module "sysvmsg.ko" at 0xc03cf468.
Preloaded elf module "if_xl.ko" at 0xc03cf508.
Preloaded elf module "miibus.ko" at 0xc03cf5a8.
Preloaded elf module "snd_es137x.ko" at 0xc03cf648.
Preloaded elf module "snd_pcm.ko" at 0xc03cf6ec.
Preloaded elf module "usb.ko" at 0xc03cf78c.
Preloaded elf module "ugen.ko" at 0xc03cf828.
Preloaded elf module "bktr.ko" at 0xc03cf8c4.
Preloaded elf module "bktr_mem.ko" at 0xc03cf960.
Preloaded elf module "agp.ko" at 0xc03cfa00.
Preloaded elf module "random.ko" at 0xc03cfa9c.
Preloaded elf module "atspeaker.ko" at 0xc03cfb3c.
Preloaded elf module "joy.ko" at 0xc03cfbe0.
Preloaded elf module "fdc.ko" at 0xc03cfc7c.
bktr_mem: memory holder loaded
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106)
Using $PIR table, 8 entries at 0xc00f78d0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 27, enabled
found-> vendor=0x1106, dev=0x0305, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x8305, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x1106, dev=0x0686, revid=0x22
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x10
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d400, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x10
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d800, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x10
bus=0, slot=7, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3057, revid=0x30
bus=0, slot=7, func=4
class=0c-05-00, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000dc00, size 8, enabled
map[14]: type 1, range 32, base dffff000, size 12, enabled
found-> vendor=0x9004, dev=0x8778, revid=0x01
bus=0, slot=12, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 3, range 32, base dddfe000, size 12, enabled
found-> vendor=0x109e, dev=0x036e, revid=0x02
bus=0, slot=13, func=0
class=04-00-00, hdrtype=0x00, mfdev=1
intpin=a, irq=9
map[10]: type 3, range 32, base dddff000, size 12, enabled
found-> vendor=0x109e, dev=0x0878, revid=0x02
bus=0, slot=13, func=1
class=04-80-00, hdrtype=0x00, mfdev=1
intpin=a, irq=9
map[10]: type 4, range 32, base 0000d000, size 6, enabled
found-> vendor=0x1274, dev=0x1371, revid=0x07
bus=0, slot=14, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
powerspec 1 supports D0 D2 D3 current D0
map[10]: type 4, range 32, base 0000cc00, size 7, enabled
map[14]: type 1, range 32, base dfffef80, size 7, enabled
found-> vendor=0x10b7, dev=0x9055, revid=0x30
bus=0, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
powerspec 1 supports D0 D1 D2 D3 current D0
pci0: <PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xa000-0xafff
pcib1: memory decode 0xdde00000-0xdfefffff
pcib1: prefetched decode 0xcdc00000-0xddcfffff
pci1: physical bus=1
map[10]: type 1, range 32, base de000000, size 24, enabled
map[14]: type 3, range 32, base d0000000, size 27, enabled
found-> vendor=0x10de, dev=0x0101, revid=0x10
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=03 ostat0=7f ostat2=50
ata1-master: ATAPI probe 7f 7f
ata1-slave: ATAPI probe 14 eb
ata1: mask=03 stat0=7f stat1=00
ata1-master: ATA probe 7f 7f
ata1: devices=08
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 7.4 (no driver attached)
ahc0: <Adaptec 2940 Pro Ultra SCSI adapter> port 0xdc00-0xdcff mem 0xdffff000-0xdfffffff irq 11 at device 12.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable is present, internal 68 cable not present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: 68 pin termination Enabled
ahc0: 50 pin termination Enabled
ahc0: Downloading Sequencer Program... 431 instructions downloaded
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
bktr0: <BrookTree 878> mem 0xdddfe000-0xdddfefff irq 9 at device 13.0 on pci0
brooktree0: PCI bus latency is 64.
bktr0: buffer size 3555328, addr 0x5000000
bktr0: GPIO is 0x00ffffff
bktr0: subsystem 0x1002 0x0001
bktr0: Warning - card vendor 0x1002 (model 0x0001) unknown.
bktr0: card signature: 00 00 00 00 00 00 00 00 01 00 01 00 01 00 00 00
bktr0: Detected a MSP3430G-A4 at 0x80
bktr0: Pinnacle/Miro TV, Temic NTSC tuner, msp3400c stereo.
pci0: <multimedia> at device 13.1 (no driver attached)
pcm0: <Creative CT5880-A> port 0xd000-0xd03f irq 5 at device 14.0 on pci0
pcm0: ac97 codec id 0x83847608 (SigmaTel STAC9708/9711)
pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: ac97 primary codec extended features surround DAC
pcm: setmap 4c9000, 1000; 0xc1255000 -> 4c9000
pcm: setmap 4cb000, 1000; 0xc1257000 -> 4cb000
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xdfffef80-0xdfffefff irq 10 at device 15.0 on pci0
xl0: Ethernet address: 00:50:04:b7:13:09
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
ata-: ata0 already exists, using ata2 instead
ata-: ata1 already exists, using ata3 instead
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 14 devices, largest 114 bytes
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xec000-0xeffff, size=0x4000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xffeffff, size=0xfef0000
PNP0c01: adding fixed memory32 range 0xfff0000-0xfff7fff, size=0x8000
PNP0c01: adding fixed memory32 range 0xfff8000-0xfffffff, size=0x8000
PNP0c01: adding fixed memory32 range 0xffff0000-0xffffffff, size=0x10000
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0000: adding fixed io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding fixed io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 1 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1
PNP0200: adding fixed io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding fixed io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding fixed io range 0xc0-0xde, size=0x1f, align=0x1
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1
pnpbios: handle 3 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding fixed io range 0x70-0x71, size=0x2, align=0x1
pnpbios: handle 4 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 5 device ID PNP0303 (0303d041)
PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 6 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 8 device ID PNP0501 (0105d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x8
pnpbios: handle 9 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x4
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x4
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
pnpbios: handle 10 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 11 device ID PNP0700 (0007d041)
PNP0a03: adding io range 0x22-0x22, size=0x1, align=0x1
PNP0a03: adding io range 0x72-0x75, size=0x4, align=0x1
PNP0a03: adding io range 0x400-0x40f, size=0x10, align=0x1
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0a03: adding io range 0x800-0x87f, size=0x80, align=0x1
PNP0a03: adding io range 0xc00-0xc7f, size=0x80, align=0x1
pnpbios: handle 12 device ID PNP0a03 (030ad041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 13 device ID PNP0f13 (130fd041)
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xca7ff on isa0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd1: unable to allocate IRQ
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc1: no video adapter found.
sc1: <System console> failed to probe at flags 0x100 on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
atspeaker0: <AT speaker> at port 0x61 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
Linux ELF exec handler installed
ad0: success setting UDMA4 on VIA chip
Creating DISK ad0
ad0: <IBM-DTLA-307075/TXAOA58A> ATA-5 disk at ata0-master
ad0: 73308MB (150136560 sectors), 148945 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 32 depth queue, tagged UDMA66
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-slave: success setting PIO4 on generic chip
acd0: <ATAPI 54X CDROM/VER-1.41> CDROM drive at ata1 as slave
acd0: read 3437KB/s (32KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(ahc0:A:3:0): Sending SDTR period c, offset f
(ahc0:A:3:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
ahc0: target 3 synchronous at 10.0MHz, offset = 0xf
(ahc0:A:3:0): Sending SDTR period 19, offset f
(ahc0:A:3:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
pass0 at ahc0 bus 0 target 3 lun 0
pass0: <TEAC CD-R58S 1.0P> Removable CD-ROM SCSI-2 device
pass0: Serial Number 2J04032B
pass0: 10.000MB/s transfers (10.000MHz, offset 15)
Creating DISK cd0
Mounting root from ufs:/dev/ad0s2a
(ahc0:A:3:0): Sending SDTR period 19, offset f
(ahc0:A:3:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
(cd0:ahc0:0:3:0): error 6
(cd0:ahc0:0:3:0): Unretryable Error
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <TEAC CD-R58S 1.0P> Removable CD-ROM SCSI-2 device
cd0: Serial Number 2J04032B
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ad0s1: type 0x1c, start 63, end = 61448624, size 61448562 : OK
ad0s2: type 0xa5, start 61448625, end = 102398309, size 40949685
ad0s2: C/H/S start 1023/0/1 (16434495) != start 61448625: invalid
start_init: trying /sbin/init
pid 272 (syslogd), uid 0: exited on signal 6 (core dumped)
--9amGYk9869ThD9tj--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010911205922.A33545>