Date: Fri, 28 Sep 2001 00:25:25 -0600 From: Graham Bakay <graham@bitmap.net> To: Sergey Solyanik <solik@sumy.net> Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: wi0 timout Message-ID: <9A396556-B3D9-11D5-9F17-003065D5AB50@bitmap.net> In-Reply-To: <20010928081308.A17979@solikus.sumy.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday, September 27, 2001, at 11:13 PM, Sergey Solyanik wrote: > On Thu, Sep 27, 2001 at 12:30:26PM -0600, Graham Bakay wrote: > >> Um, yes it is prism, but the driver recognizes it fine (I think). > > It's easy to check: boot -v, and look for "found PrismII chip" or > "found Lucent chip" in dmesg. I tried this. The only things that wi said were: wi0: <PRISM2STA PCI WaveLAN/IEEE 802.11> port 0xc400-0xc43f,0xc000-0xc07f mem 0xec003000-0xec003fff irq 10 at device 10.0 on pci0 wi0: Ethernet address: 00:e0:29:91:bd:ab wi0: wi_generic_attach:wi_has_wep = 1 > If it's recognized correctly, than double check all IO and IRQ > resources, > and if it still not working, ask Warner Losh :) Again, it seems like it's working. I flashed the SMC bios to version 8.3, and the timeout errors are gone. The only problem is that wicontrol and ifconfig say everything is working great, and when I ping the interface from the machine it's on I get a return, but my PowerBook doesn't see anything now, where it used to see the system ID as an available network. Does anyone know what everything should look like (in wicontrol) so I can tell if the card is actually broadcasting or my mac just isn't seeing it (which is unlikely, since I know that card works). IE: is there any utilities in FreeBSD to measure signal strength, available networks, etc? I'm so close! g. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9A396556-B3D9-11D5-9F17-003065D5AB50>