Date: Fri, 15 Feb 2002 00:11:47 -0500 (EST) From: Stuart Barkley <stuartb@4gh.net> To: Marius Strom <marius@marius.org> Cc: "M. Warner Losh" <imp@village.org>, <freebsd-mobile@FreeBSD.ORG> Subject: Re: Can't boot FreeBSD on a Toshiba Laptop Message-ID: <20020214233000.G13300-100000@4gh.dyndns.org> In-Reply-To: <20020110044338.GM64900@marius.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Marius, did you ever get a solution for your problem? I've just tried a Toshiba Satellite 1005-S157 ($899 after rebates at Circuit City) and have seen a similar problem. Before purchasing this I searched the archives and could find no references to this model. I've tried both 4.4-RELEASE and 4.5-RELEASE with similar problems. I need to replace a previously work supplied laptop and want something fairly basic that runs FreeBSD and can handle audio capture and playback well. Looking at the new generation of laptops, most no longer seem to include a "line in" connector which is important to me. The Toshiba looks like it should handle my needs pretty well, if I can just get FreeBSD working on it. I've generally preferred to run -RELEASE, but am willing to use -STABLE or -CURRENT if necessary. Can anyone suggest another sub $1000 brand/model which works well with FreeBSD and audio I/O? Last lines of boot (manually retyped): pci2: <PCI bus> on pcib1 pci_cfgintr_linked: linked (60) to hard-routed irq 10 pci_cfgintr: 2:4 INTA routed to irq 10 pcic0: <TI PCI-1420 PCI-CardBus Bridge> irq 10 at device 4.0 on pci2 pcic0: PCI Memory allocated: 0x44000000 pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pccard0: <PC Card bus (classic)> on pcic0 pci_cfgintr_linked: linked (61) to hard-routed irq 10 pci_cfgintr: 2:4 INTB routed to irq 10 pcic1: <TI PCI-1420 PCI-CardBus Bridge> irq 10 at device 4.1 on pci2 pcic1: PCI Memory allocated: 0x44001000 pcic1: TI12XX pcic1: PCI Config Reg: [speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pccard1: <PC Card bus (classic)> on pcic1 isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe0100000-0xe01003ff at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 10 pci0: <unknown card> (vendor=0x8086, dev=0x2485) at 31.5 irq 10 pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 10 [locks hard at this point] On Wed, 9 Jan 2002, Marius Strom wrote: > Date: Wed, 9 Jan 2002 22:43:39 -0600 > From: Marius Strom <marius@marius.org> > Reply-To: mobile@FreeBSD.ORG > To: M. Warner Losh <imp@village.org> > Cc: freebsd@samurai.deec.uc.pt, stable@FreeBSD.ORG, paulo@isr.uc.pt, > mobile@FreeBSD.ORG > Subject: Re: Can't boot FreeBSD on a Toshiba Laptop > > Yet another data point: Doesn't work with 4.5-RC1 either. CC:ing'g > -mobile, and setting reply-to to mobile since -stable is in codefreeze. > > On Wed, Jan 09, 2002 at 03:35:35PM -0600, Marius Strom wrote: > > Warner (et al), > > Unfortunately, still doesn't work. > > > > Last few lines of boot: > > > > pci2: <unknown card> (vendor=0x1179, dev=0x0804) at 6.0 irq 5 > > isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0 > > isa0: <ISA bus> on isab0 > > atapci0: <Generic PCI ATA controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xd0000000-0xd00003ff at device 31.1 on pci0 > > ata0: at 0x1f0 irq 14 on atapci0 > > ata1: at 0x170 irq 15 on atapci0 > > pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 10 > > pci0: <unknown card> (vendor=0x8086, dev=0x2485) at 31.5 irq 10 > > pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 10 > > > > It hard locks at that point. If I can provide any information obtainable > > from another OS on the machine (it boots linux, winxp) let me know (I can > > also dig in and find exactly what components are where). To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020214233000.G13300-100000>