Date: Thu, 05 Dec 2002 00:43:39 +0900 (JST) From: Takahashi Yoshihiro <nyan@jp.FreeBSD.org> To: scott_long@btc.adaptec.com Cc: phk@critter.freebsd.dk, scottl@freebsd.org, current@freebsd.org Subject: Re: ahc and fd Message-ID: <20021205.004339.68093067.nyan@jp.FreeBSD.org> In-Reply-To: <20021204151622.GA1287@hollin.btc.adaptec.com> References: <89092.1039009459@critter.freebsd.dk> <20021204.235355.38659901.nyan@jp.FreeBSD.org> <20021204151622.GA1287@hollin.btc.adaptec.com>
next in thread | previous in thread | raw e-mail | index | archive | help
----Next_Part(Thu_Dec__5_00:43:39_2002_372)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
In article <20021204151622.GA1287@hollin.btc.adaptec.com>
Scott Long <scott_long@btc.adaptec.com> writes:
> Do you have an ahc card in your system? If you don't, then I have no idea
> what could be going wrong since it shouldn't do anything more than just
> check PCI Id's and then fail. If you do have an ahc device, try placing
> the following line in /boot/device.hints:
>
> hint.ahc.0.allow_memio=1
I am using the Japanese version of AHA-2940U which supports both
IBM-PC and PC-98. I tried enabling the above option, but the fd
driver still does not work. I attach the output of dmesg.
---
TAKAHASHI Yoshihiro <nyan@FreeBSD.org>
----Next_Part(Thu_Dec__5_00:43:39_2002_372)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename=dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1994-2002 FreeBSD(98) porting team.
Copyright (c) 1992 A.Kojima F.Ukai M.Ishii (KMC).
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #11: Wed Dec 4 23:36:53 JST 2002
nyan@cerberus.ccs.furiru.org:/work/sys/pc98/compile/GENERIC
Preloaded elf kernel "/boot/kernel.t/kernel" at 0xc04f3000.
Calibrating clock(s) ... TSC clock: 198947438 Hz, i8254 clock: 2457599 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 2457600 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 198949336 Hz
CPU: Pentium Pro (198.95-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x616 Stepping = 6
Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory = 134217728 (128 MB)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x0051a000 - 0x00efffff, 10379264 bytes (2534 pages)
0x01000000 - 0x07ff7fff, 117407744 bytes (28664 pages)
avail memory = 123875328 (118 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f4c40
bios32: Entry = 0xf5612 (c00f5612) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xd90b0+0x1c56b
pnpbios: Found PnP BIOS data at 0xc00f51b0
pnpbios: Entry = d8000:3a Rev = 1.0
pnpbios: OEM ID 38394350
Other BIOS signatures found:
Initializing GEOMetry subsystem
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
null: <null device, zero device>
Math emulator present
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12378086)
pcibios: BIOS_PRESENT call failed
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x1237, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1033, dev=0x002c, revid=0x01
bus=0, slot=6, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1033, dev=0x0009, revid=0x02
bus=0, slot=7, func=0
class=03-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 20000000, size 22, enabled
map[14]: type 1, range 32, base 20400000, size 16, enabled
map[18]: type 1, range 32, base 20800000, size 22, enabled
found-> vendor=0x1023, dev=0x9660, revid=0xd3
bus=0, slot=8, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 3, range 32, base 20410000, size 12, enabled
map[14]: type 4, range 32, base 00006000, size 5, enabled
map[18]: type 1, range 32, base 20500000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x01
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x57 (2610 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=3
map[10]: type 4, range 32, base 00006100, size 8, enabled
map[14]: type 1, range 32, base 20411000, size 12, enabled
found-> vendor=0x9004, dev=0x8178, revid=0x00
bus=0, slot=16, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x54 (2520 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=3
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 6.0 on pci0
isa0: <ISA bus> on isab0
pci0: <display> at device 7.0 (no driver attached)
pci0: <display, VGA> at device 8.0 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6000-0x601f mem 0x20500000-0x205fffff,0x20410000-0x20410fff irq 3 at device 11.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:00:4c:8d:1b:04
fxp0: PCI IDs: 8086 1229 0000 0000 0001
fxp0: Dynamic Standby mode is disabled
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x6100-0x61ff mem 0x20411000-0x20411fff irq 3 at device 16.0 on pci0
ahc0: PCI Device 0:16:0 failed memory mapped test. Using PIO.
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable not present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 418 instructions downloaded
aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: error 0/82 getting device count/size limit
pnpbios: 1 devices, largest 0 bytes
pnpbios: error 0x82 fetching node 0
gdc: gdc0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xdc000-0xdf7ff on isa0
bs0 failed to probe at port 0xcc0 irq 5 drq 3 on isa0
ct0 failed to probe at port 0xcc0-0xcc7 on isa0
ed0 failed to probe at port 0xd0-0xef irq 6 on isa0
ed1 failed to probe at port 0x61d8,0x51d8,0x41d8,0x31d8,0x21d8,0x11d8,0x1d8,0xf0d8,0xe0d8,0xd0d8,0xc0d8,0xb0d8,0xa0d8,0x90d8,0x80d8,0x70d8,0x60d8,0x50d8,0x40d8,0x30d8,0x20d8,0x10d8,0xd8 irq 6 flags 0x200000 on isa0
isa_load_resourcev: map size too large
ed10 failed to probe at port 0x1fd0,0x1ed0,0x1dd0,0x1cd0,0x1bd0,0x1ad0,0x19d0,0x18d0,0x17d0,0x16d0,0x15d0,0x14d0,0x13d0,0x12d0,0x11d0,0x10d0,0xfd0,0xed0,0xdd0,0xcd0,0xbd0,0xad0,0x9d0,0x8d0,0x7d0,0x6d0,0x5d0,0x4d0,0x3d0,0x2d0,0x1d0,0xd0 irq 3 flags 0xd10000 on isa0
ed11 failed to probe at port 0xf4d0,0xe4d0,0xd4d0,0xc4d0,0xb4d0,0xa4d0,0x94d0,0x84d0,0x74d0,0x64d0,0x54d0,0x44d0,0x34d0,0x24d0,0x14d0,0x4d0,0xf0d0,0xe0d0,0xd0d0,0xc0d0,0xb0d0,0xa0d0,0x90d0,0x80d0,0x70d0,0x60d0,0x50d0,0x40d0,0x30d0,0x20d0,0x10d0,0xd0 irq 3 flags 0xe00000 on isa0
ed12 failed to probe at port 0x61d0,0x60d0,0x40d0,0x2fd0,0x2ed0,0x2dd0,0x2cd0,0x2bd0,0x2ad0,0x29d0,0x28d0,0x27d0,0x26d0,0x25d0,0x24d0,0x23d0,0x22d0,0x21d0,0x20d0 irq 3 flags 0xf00000 on isa0
ed2 failed to probe at port 0x3e6,0x3e4,0x3e2,0x3e0,0x3de,0x3dc,0x3da,0x3d8,0x2e6,0x2e4,0x2e2,0x2e0,0x2de,0x2dc,0x2da,0x2d8,0x1e6,0x1e4,0x1e2,0x1e0,0x1de,0x1dc,0x1da,0x1d8,0xe6,0xe4,0xe2,0xe0,0xde,0xdc,0xda,0xd8 irq 6 flags 0x300000 on isa0
ed3 failed to probe at port 0x3de,0x3dc,0x3da,0x3d8,0x3d6,0x3d4,0x3d2,0x3d0,0x2de,0x2dc,0x2da,0x2d8,0x2d6,0x2d4,0x2d2,0x2d0,0xd0-0xdf irq 6 flags 0x400000 on isa0
ed4 failed to probe at port 0x57d0-0x57df,0x56d0-0x56df irq 5 flags 0x500000 on isa0
ed5 failed to probe at port 0x20d0,0x1ed0,0x1cd0,0x1ad0,0x18d0,0x16d0,0x14d0,0x12d0,0x10d0,0xed0,0xcd0,0xad0,0x8d0,0x6d0,0x4d0,0x2d0,0xd0 iomem 0xd0000-0xd3fff irq 6 flags 0x600000 on isa0
ed6 failed to probe at port 0x177e,0x177c,0x177a,0x1778,0x1776,0x1774,0x1772,0x1770,0x77e,0x77c,0x77a,0x778,0x776,0x774,0x772,0x770 irq 6 flags 0x800000 on isa0
ed7 failed to probe at port 0x61d0,0x51d0,0x41d0,0x31d0,0x21d0,0x11d0,0x1d0,0xf0d0,0xe0d0,0xd0d0,0xc0d0,0xb0d0,0xa0d0,0x90d0,0x80d0,0x70d0,0x60d0,0x50d0,0x40d0,0x30d0,0x20d0,0x10d0,0xd0 irq 6 flags 0x900000 on isa0
ed8 failed to probe at port 0xa7d0-0xa7df,0xa3d0-0xa3df iomem 0xd0000-0xd3fff irq 6 flags 0xa00000 on isa0
ed9 failed to probe at port 0x7d0-0x7df,0x3d0-0x3df irq 6 flags 0xb00000 on isa0
fdc0 at port 0x4be,0xbe,0x94,0x92,0x90 irq 11 drq 2 on isa0
fd0: <1.44M FDD> on fdc0 drive 0
fd1: <1.44M FDD> on fdc0 drive 1
fe0 failed to probe at port 0x3de,0x3dc,0x3da,0x3d8,0x3d6,0x3d4,0x3d2,0x3d0,0x2de,0x2dc,0x2da,0x2d8,0x2d6,0x2d4,0x2d2,0x2d0,0x1de,0x1dc,0x1da,0x1d8,0x1d6,0x1d4,0x1d2,0x1d0,0xde,0xdc,0xda,0xd8,0xd6,0xd4,0x2d0-0x2df,0xd0-0xef irq 3 on isa0
fe1 failed to probe at port 0x77df,0x77dd,0x77db,0x77d9,0x77d7,0x77d5,0x77d3,0x77d1,0x77de,0x77dc,0x77da,0x77d8,0x77d6,0x77d4,0x77d2,0x77d0,0x73d0-0x73ef irq 5 on isa0
gdc0: <Generic GDC> at port 0xaf,0xad,0xab,0xa9,0xa7,0xa5,0xa3,0xa1,0x7e,0x7c,0x7a,0x78,0x76,0x74,0x72,0x70,0x9ae,0x9ac,0x9aa,0x9a8,0x9a6,0x9a4,0x9a2,0x9a0,0x4ae,0x4ac,0x4aa,0x4a8,0x4a6,0x4a4,0x4a2,0x4a0,0xae,0xac,0xaa,0xa8,0xa6,0xa4,0xa2,0xa0,0x6e,0x6c,0x6a,0x68,0x66,0x64,0x62,0x60 iomem 0xe0000-0xe7fff,0xa8000-0xbffff,0xa0000-0xa4fff on isa0
fb0: gdc0, gdc, type:PC-98x1 (6), flags:0x700c3
fb0: port:0x60-0x6f, crtc:0x60, mem:0xa0000 0x48000
fb0: init mode:98, bios mode:98, current mode:98
fb0: window:0xc00a0000 size:32k gran:32k, buf:0 size:0k
lnc0 failed to probe at port 0x7d0-0x7df,0x3d0-0x3df irq 6 on isa0
mse0: <Bus/InPort Mouse> at port 0x7fdf,0x7fdd,0x7fdb,0x7fd9 irq 13 on isa0
olpt0 failed to probe at port 0x40 on isa0
pcic0 failed to probe at port 0x3e0 on isa0
pckbd0: <PC-98 Keyboard> at port 0x43,0x41 irq 1 on isa0
kbd0 at pckbd0
kbd0: pckbd0, generic (0), config:0x0, flags:0x3d0000
ppc0: parallel port found at 0x140
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x140-0x147 irq 14 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> on isa0
sc0: PC-98x1 <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sck (syscons kanji terminal)
sio0 at port 0x30 irq 4 on isa0
sio0: type (internal fifo v-fast)
sio1: irq maps: 0xc081 0xc0a1 0xc081 0xc081
sio1 at port 0x238-0x23f irq 5 flags 0x12000000 on isa0
sio1: type 16550A
snc0 failed to probe at port 0x888-0x88d iomem 0xc0000-0xc1fff irq 6 on isa0
wdc0 at port 0x640-0x647 irq 9 on isa0
wdc0: unit 0 (wd0): <QUANTUM FIREBALL ST3.2A>
wd0: 3079MB (6306048 sectors), 46368 cyls, 8 heads, 17 S/T, 512 B/S
wd0: ATA INQUIRE valid = 0007, dmamword = 0407, apio = 0003, udma = 0007
wdc0: unit 2 (wd1): <WDC AC1425F>
wd1: 407MB (833544 sectors), 6129 cyls, 8 heads, 17 S/T, 512 B/S
wd1: ATA INQUIRE valid = 0003, dmamword = 0203, apio = 0001, udma = 0000
wdc0: unit 1 (wd2): <WDC AC21200H>
wd2: 1222MB (2503760 sectors), 18410 cyls, 8 heads, 17 S/T, 512 B/S
wd2: ATA INQUIRE valid = 0003, dmamword = 0407, apio = 0003, udma = 0000
wdc0: unit 3 (atapi): <MATSHITA CR-582/108N>, removable, accel, dma, iordis
wcd0: drive speed 1031KB/sec, 128KB cache
wcd0: supported read types: CD-R, CD-DA
wcd0: Audio: play, 256 volume levels
wcd0: Mechanism: ejectable tray
wcd0: Medium: no/blank disc inside, unlocked
wdc0: driver is using old-style compatibility shims
isa_probe_children: probing PnP devices
BIOS Geometries:
0:b5200811 0..46368=46369 cylinders, 0..8=9 heads, 1..17=17 sectors
1:17f10811 0..6129=6130 cylinders, 0..8=9 heads, 1..17=17 sectors
2:47ea0811 0..18410=18411 cylinders, 0..8=9 heads, 1..17=17 sectors
3:98b40880 0..39092=39093 cylinders, 0..8=9 heads, 1..128=128 sectors
4:80c30820 0..32963=32964 cylinders, 0..8=9 heads, 1..32=32 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
GEOM: new disk wd0
GEOM: new disk wd1
GEOM: new disk wd2
PC98 Slice 1 on wd0:
0000 94 c4 6e 64 00 00 01 00 00 00 01 00 00 00 1f b5 |..nd............|
0010 46 72 65 65 42 53 44 00 00 00 00 00 00 00 00 00 |FreeBSD.........|
[0] mid:148(0x94) sid:196(0xc4) s:1/0/0 e:46367/0/0 sname:FreeBSD
GEOM: Add wd0s1, start 69632 length 3228626944 end 3228696575
PC98 Slice 1 on wd1:
0000 a1 a1 00 00 00 00 01 00 00 00 01 00 00 00 e2 17 |................|
0010 4d 53 2d 44 4f 53 20 36 2e 32 30 20 20 20 20 20 |MS-DOS 6.20 |
[0] mid:161(0xa1) sid:161(0xa1) s:1/0/0 e:6114/0/0 sname:MS-DOS 6.20
GEOM: Add wd1s1, start 69632 length 425730048 end 425799679
PC98 Slice 1 on wd2:
0000 a0 e1 00 00 00 00 01 00 00 00 01 00 00 00 e9 47 |...............G|
0010 57 69 6e 64 6f 77 73 20 39 38 20 20 20 20 20 20 |Windows 98 |
[0] mid:160(0xa0) sid:225(0xe1) s:1/0/0 e:18409/0/0 sname:Windows 98
GEOM: Add wd2s1, start 69632 length 1281855488 end 1281925119
GEOM: Configure wd0s1a, start 0 length 536870912 end 536870911
GEOM: Configure wd0s1b, start 536870912 length 536870912 end 1073741823
GEOM: Configure wd0s1c, start 0 length 3228626944 end 3228626943
GEOM: Configure wd0s1e, start 1073741824 length 2154885120 end 3228626943
(probe1:ahc0:0:1:0): Retrying Command
(probe0:ahc0:0:0:0): error 22
(probe0:ahc0:0:0:0): Unretryable Error
(ahc0:A:0:0): Sending SDTR period c, offset f
(ahc0:A:0:0): Received SDTR period c, offset f
Filtered to period c, offset f
ahc0: target 0 synchronous at 20.0MHz, offset = 0xf
(ahc0:A:0:0): Sending SDTR period c, offset f
(ahc0:A:0:0): Received SDTR period c, offset f
Filtered to period c, offset f
(ahc0:A:1:0): Sending SDTR period c, offset f
(ahc0:A:1:0): Received SDTR period c, offset f
Filtered to period c, offset f
ahc0: target 1 synchronous at 20.0MHz, offset = 0xf
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <I-O DATA HDVS-UM20G 200F> Fixed Direct Access SCSI-2 device
pass0: 20.000MB/s transfers (20.000MHz, offset 15)
pass1 at ahc0 bus 0 target 1 lun 0
pass1: <SAMSUNG WN34324U (gm030) 0105> Fixed Direct Access SCSI-2 device
pass1: Serial Number
pass1: 20.000MB/s transfers (20.000MHz, offset 15)
da0 at ahc0 bus 0 target 0 lun 0
da0: <I-O DATA HDVS-UM20G 200F> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15)
da0: 19546MB (40031712 512 byte sectors: 8H 128S/T 39092C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SAMSUNG WN34324U (gm030) 0105> Fixed Direct Access SCSI-2 device
da1: Serial Number
da1: 20.000MB/s transfers (20.000MHz, offset 15)
da1: 4120MB (8438976 512 byte sectors: 8H 32S/T 32963C)
GEOM: new disk da0
GEOM: new disk da1
PC98 Slice 1 on da0:
0000 94 c4 00 00 00 00 01 00 00 00 01 00 00 00 ff 4f |...............O|
0010 46 72 65 65 42 53 44 00 00 00 00 00 00 00 00 00 |FreeBSD.........|
[0] mid:148(0x94) sid:196(0xc4) s:1/0/0 e:20479/0/0 sname:FreeBSD
GEOM: Add da0s1, start 524288 length 10736893952 end 10737418239
(ahc0:A:0:0): Sending SDTR period c, offset f
(ahc0:A:0:0): Received SDTR period c, offset f
Filtered to period c, offset f
(ahc0:A:0:0): Sending SDTR period c, offset f
(ahc0:A:0:0): Received SDTR period c, offset f
Filtered to period c, offset f
GEOM: Configure da0s1a, start 268435456 length 10468458496 end 10736893951
GEOM: Configure da0s1b, start 0 length 268435456 end 268435455
GEOM: Configure da0s1c, start 0 length 10736893952 end 10736893951
(ahc0:A:0:0): Sending SDTR period c, offset f
(ahc0:A:0:0): Received SDTR period c, offset f
Filtered to period c, offset f
(ahc0:A:0:0): Sending SDTR period c, offset f
(ahc0:A:0:0): Received SDTR period c, offset f
Filtered to period c, offset f
(ahc0:A:0:0): Sending SDTR period c, offset f
(ahc0:A:0:0): Received SDTR period c, offset f
Filtered to period c, offset f
(ahc0:A:0:0): Sending SDTR period c, offset f
(ahc0:A:0:0): Received SDTR period c, offset f
Filtered to period c, offset f
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init
Linux ELF exec handler installed
----Next_Part(Thu_Dec__5_00:43:39_2002_372)----
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021205.004339.68093067.nyan>