Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 27 Dec 2002 05:44:06 +0300
From:      "Sergey V. Golitzyn" <klimax@proxy.immune.isf.ru>
To:        Adam K Kirchhoff <adamk@voicenet.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: VIA USB support problem...
Message-ID:  <200212270544.06134.klimax@proxy.immune.isf.ru>
In-Reply-To: <200212270527.34721.klimax@proxy.immune.isf.ru>
References:  <Pine.LNX.4.50.0212261843380.2180-100000@sorrow.ashke.com> <20021226210100.D631@sorrow.ashke.com> <200212270527.34721.klimax@proxy.immune.isf.ru>

next in thread | previous in thread | raw e-mail | index | archive | help


Sorry, i was wrong  about acpi, in the manuals said what
///////////
     Note that the acpi driver is automatically loaded by the bootloader, and
     should not normally be compiled into the kernel.
//////////////

but i have it in kernel and system is stable, as i can see... :-)))

Sergey V. Golitzyn (Russia)



On Friday 27 December 2002 05:27, Sergey V. Golitzyn wrote:
> Try to add
>
> device		acpi
> device		ohci		# OHCI PCI->USB interface
>
> into your kernel configuration...
>
> Any more diffrances i don't see...
> See my kernel, if it will help you ...
>
> On Friday 27 December 2002 05:01, you wrote:
> > On Fri, 27 Dec 2002, Sergey V. Golitzyn wrote:
> > > On Friday 27 December 2002 02:44, Adam K Kirchhoff wrote:
> > > > I'm having a difficult time getting any USB devices to work under
> > > > -CURRENT with a VIA UHCI controller.
> > > >
> > > > uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device
> > > > 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0
> > > > usb0: USB revision 1.0
> > > > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > > > uhub0: 2 ports with 2 removable, self powered
> > > > uhub0: port error, restarting port 1
> > > > uhub0: port error, giving up port 1
> > > > ums0: Logitech USB Receiver, rev 1.10/15.00, addr 2, iclass 3/1
> > > > ums0: 7 buttons and Z dir.
> > > > uhub0: port error, restarting port 2
> > > > uhub0: port error, giving up port 2
> > > > uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr
> > > > 3 uhub1: 4 ports with 4 removable, self powered
> > > > ugen0: Logitech product 0xc207, rev 1.00/1.04, addr 4
> > > > ugen0: setting configuration index 0 failed
> > > > device_probe_and_attach: ugen0 attach returned 6
> > > > uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 5 at device
> > > > 7.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1
> > > > usb1: USB revision 1.0
> > > > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > > > uhub2: 2 ports with 2 removable, self powered
> > > > uhub2: port error, restarting port 1
> > > > uhub2: port error, giving up port 1
> > > > uhub2: port error, restarting port 2
> > > > uhub2: port error, giving up port 2
> > > >
> > > > The above is from dmesg...  As you can see, it detects the UHCI
> > > > controller, and sees the various devices (Logitech joystick: ugen0,
> > > > Logitech mouse: ums0) but they're completely unusable.  I'm
> > > > *assuming* it has something to do with the "port error" messages, but
> > > > I'm not sure how to fix this.
> > > >
> > > > So, I guess the real question is, where should I be asking about
> > > > this?
> > >
> > > As You Can see bellow, I have the same VIA USB and Logitech USB mouse,
> > > but it's fine working from September, but I Have Another problem, my TV
> > > Tuner Playung Audio, but don't show picture when i use "fxtv"... %-))
> > > As a result I Have TV Radio.... :-))))
> > >
> > > Try to Attach You Kernel Configuration and Preloaded modules? may be
> > > you forgot load USB module............
> >
> > USB is compiled directly into the kernel, as you can see from the
> > configuration file I've attached.
> >
> > Adam


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200212270544.06134.klimax>