Date: Tue, 4 Feb 2003 17:16:17 +0200 From: Ruslan Ermilov <ru@freebsd.org> To: Geoff Buckingham <geoffb@chuggalug.clues.com> Cc: stable@freebsd.org Subject: Re: HP/Compaq DL580 G2 Message-ID: <20030204151617.GA25237@sunbay.com> In-Reply-To: <20030204153647.GB43238@chuggalug.clues.com> References: <20030204145009.GA43238@chuggalug.clues.com> <20030204143805.GB14893@sunbay.com> <20030204153647.GB43238@chuggalug.clues.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--3MwIy2ne0vdjdPXF Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Feb 04, 2003 at 03:36:47PM +0000, Geoff Buckingham wrote: > On Tue, Feb 04, 2003 at 04:38:05PM +0200, Ruslan Ermilov wrote: > > On Tue, Feb 04, 2003 at 02:50:09PM +0000, Geoff Buckingham wrote: > > > Anybody got the Broadcom NIC provides with these systems to work with= 4.7? > > >=20 > > > or at all? > > >=20 > > Gigabit one? > >=20 >=20 > I have bee looking into this, the machine is a loaner,=20 > it contains three em's which I can see fine, an fxp > and a bge which I can not. >=20 > The two nics I cant see are not listed as unknown devices either, > they seem to be hidden behind the compaq hotplug pci controller > (0xa0f7) >=20 Sorry, ENOCLUE. What I know is that our bge(4) driver is buggy with some old firmware cards, like the one we had here, so it may or may not work for you. > Copyright (c) 1992-2002 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002 > root@builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC > Timecounter "i8254" frequency 1193182 Hz > CPU: Pentium 4 (1599.95-MHz 686-class CPU) > Origin =3D "GenuineIntel" Id =3D 0xf11 Stepping =3D 1 > Features=3D0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,= PGE,MCA,C > MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC> > real memory =3D 2147459072 (2097128K bytes) > avail memory =3D 2086514688 (2037612K bytes) > Preloaded elf kernel "kernel" at 0xc050f000. > Pentium Pro MTRR support enabled > md0: Malloc disk > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > pci0: <unknown card> (vendor=3D0x0e11, dev=3D0xb203) at 2.0 irq 3 > pci0: <unknown card> (vendor=3D0x0e11, dev=3D0xb204) at 2.2 irq 5 > pci0: <ATI Mach64-GR graphics accelerator> at 3.0 > isab0: <PCI to ISA bridge (vendor=3D1166 device=3D0201)> at device 15.0 o= n pci0 > isa0: <ISA bus> on isab0 > atapci0: <ServerWorks CSB5 ATA100 controller> port 0x2000-0x200f,0x374-0x= 377,0x1 > 70-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > ohci0: <OHCI (generic) USB controller> mem 0xeefe0000-0xeefe0fff irq 10 a= t devic > e 15.2 on pci0 > usb0: OHCI version 1.0, legacy support > usb0: SMM does not respond, resetting > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 4 ports with 4 removable, self powered > pcib1: <Host to PCI bridge> on motherboard > pci1: <PCI bus> on pcib1 > ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem 0xf01f0000-0xf01f3f= ff,0xf0 > 2c0000-0xf02fffff irq 11 at device 1.0 on pci1 > ciss0: using 256 of 1024 available commands > ciss0: 1 logical drive configured > ciss0: firmware 1.80 > ciss0: 2 SCSI channels > ciss0: signature 'CISS' > ciss0: valence 1 > ciss0: supported I/O methods 0xe<simple,performant,MEMQ> > ciss0: active I/O method 0x3<simple> > ciss0: 4G page base 0x00000000 > ciss0: interrupt coalesce delay 1000us > ciss0: interrupt coalesce count 16 > ciss0: max outstanding commands 1024 > ciss0: bus types 0x2<ultra3> > ciss0: server name '' > ciss0: heartbeat 0x30000058 > ciss0: 1 logical drive > ciss0: logical drive 0: RAID 5, 34304MB online > pcib2: <Host to PCI bridge> on motherboard > pci2: <PCI bus> on pcib2 > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> mem 0xf2bd0= 000-0xf > 2bdffff,0xf2be0000-0xf2bfffff irq 10 at device 1.0 on pci2 > em0: Speed:N/A Duplex:N/A > em1: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> mem 0xf2b90= 000-0xf > 2b9ffff,0xf2ba0000-0xf2bbffff irq 5 at device 2.0 on pci2 > em1: Speed:N/A Duplex:N/A > pci2: <unknown card> (vendor=3D0x0e11, dev=3D0xa0f7) at 30.0 irq 3 > pcib3: <Host to PCI bridge> on motherboard > pci3: <PCI bus> on pcib3 > pcib4: <Host to PCI bridge> on motherboard > pci4: <PCI bus> on pcib4 > pcib5: <Host to PCI bridge> on motherboard > pci5: <PCI bus> on pcib5 > pcib6: <Host to PCI bridge> on motherboard > pci6: <PCI bus> on pcib6 > em2: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> mem 0xf7cd0= 000-0xf > 7cdffff,0xf7ce0000-0xf7cfffff irq 10 at device 2.0 on pci6 > em2: Speed:N/A Duplex:N/A > pci6: <unknown card> (vendor=3D0x0e11, dev=3D0xa0f7) at 30.0 irq 10 > pcib7: <Host to PCI bridge> on motherboard > pci7: <PCI bus> on pcib7 > pcib8: <Host to PCI bridge> on motherboard > pci8: <PCI bus> on pcib8 > eisa0: <EISA bus> on motherboard > mainboard0: <CPQ0736 (System Board)> on eisa0 slot 0 > orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd= 7ff,0xc > d800-0xcefff,0xee000-0xeffff on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1: configured irq 3 not in bitmap of probed irqs 0 > ppc0: parallel port not found. > ata0-slave: ATA identify retries exceeded > acd0: CDROM <COMPAQ CD-ROM SN-124> at ata0-master PIO4 > Mounting root from ufs:/dev/da0s1a > da0 at ciss0 bus 0 target 0 lun 0 > da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-0 device > da0: 135.168MB/s transfers > da0: 34719MB (71106240 512 byte sectors: 255H 32S/T 8714C) >=20 >=20 > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message --=20 Ruslan Ermilov Sysadmin and DBA, ru@sunbay.com Sunbay Software AG, ru@FreeBSD.org FreeBSD committer, +380.652.512.251 Simferopol, Ukraine http://www.FreeBSD.org The Power To Serve http://www.oracle.com Enabling The Information Age --3MwIy2ne0vdjdPXF Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (FreeBSD) iD8DBQE+P9lBUkv4P6juNwoRAuOZAKCMFekdmPs8hXlj7Gg+Vyzp1fNwXACfdeRc w4O9Hi5E9Kyl9f4MvwGppjw= =SA5t -----END PGP SIGNATURE----- --3MwIy2ne0vdjdPXF-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030204151617.GA25237>