Date: Wed, 12 Feb 2003 15:05:36 -0800 (PST) From: Nate Lawson <nate@root.org> To: Jeff Fellin <jkf@research.bell-labs.com> Cc: bucy@ece.cmu.edu, freebsd-scsi@FreeBSD.ORG Subject: Re: isp target mode Message-ID: <Pine.BSF.4.21.0302121503160.34712-100000@root.org> In-Reply-To: <200302122118.h1CLIxju008055@zydeco.research.bell-labs.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 12 Feb 2003, Jeff Fellin wrote: > Do you have the following in your kernel config file: > > device ispfw > OPTIONS ISP_TARGET_MODE > > This has worked for me with the Qlogic ISP 2200 FC-AL adapter > and Qlogic ISP 1280 PCI SCSI Adapter. Right. You have to load firmware each time at boot. The onboard firmware only supports a minimum necessary to do int 13 booting. You can use the above "device" line or put ispfw_load="YES" in /boot/loader.conf Note that for isp(4) you can only enable target mode on the card's initiator id. i.e. if your init id is 7, use 0:7:0 for the id to enable for target mode. -Nate To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0302121503160.34712-100000>